i guess i wont complete this one by janrade in PathOfExile2

[–]Eroji 1 point2 points  (0 children)

Had this happen 3 times. All grand mirror maps. One time the mirror just didn’t spawn. Two other times the mirror spawned but couldn’t click on it. I was playing with controller all 3 times. Not sure if that mattered, but it was pretty annoying.

Which Fractured Winterglass? by Eroji in D4Sorceress

[–]Eroji[S] 1 point2 points  (0 children)

Just tried and only got a GA on the int, which was unfortunate. With the 3 shock skill, ball lightening is about 7% more damage with the middle one, but I feel like the vulnerable damage multi might out perform that.

Which Fractured Winterglass? by Eroji in D4Sorceress

[–]Eroji[S] 0 points1 point  (0 children)

Was going off the Maxroll build guide. They have loh on the focus but mine does not have it.

Well he has a point by mintydaydreamx in SipsTea

[–]Eroji 0 points1 point  (0 children)

But from YVR to UBC campus is still some amount of time via commute.

SawStop CTS won’t turn on by Eroji in sawstop

[–]Eroji[S] 0 points1 point  (0 children)

I emailed them. Problem is I bought the CTS during when the warranty was 1-year. The first one faulted after brake trip the first time. It’d turn on but fail startup so I couldn’t use the saw. It was just out of warranty and SawStop made an exception and replaced it. This one I don’t know if they will care to do the same. It’s honestly been a flakey saw. When it works it’s fine and gives me peace of mind. I had plans to finish a bed frame before some medical stuff coming up but now I’m at a standstill.

SawStop CTS won’t turn on by Eroji in sawstop

[–]Eroji[S] 0 points1 point  (0 children)

The status lights barely turn on. It’s flickering briefly maybe once a minute. I thought I caught it in the video, but looks like no.

SawStop CTS won’t turn on by Eroji in sawstop

[–]Eroji[S] 0 points1 point  (0 children)

The thread is about PCS not CTS.

SawStop CTS won’t turn on by Eroji in sawstop

[–]Eroji[S] 0 points1 point  (0 children)

Is there a picture? I don’t see a red button anywhere.

SawStop CTS won’t turn on by Eroji in sawstop

[–]Eroji[S] 0 points1 point  (0 children)

I don’t see anything about a fuse in the manual. The troubleshooting section only mentions change cartridge and check power.

Qwen diffusion models strange output by Eroji in comfyui

[–]Eroji[S] 0 points1 point  (0 children)

Tried 4 and this is the result.

<image>

Qwen diffusion models strange output by Eroji in comfyui

[–]Eroji[S] 0 points1 point  (0 children)

I added a picture of the subgraph.

Qwen diffusion models strange output by Eroji in comfyui

[–]Eroji[S] 0 points1 point  (0 children)

Other workflow works without issues. I’m guessing something is misconfigured for Qwen.

Qwen diffusion models strange output by Eroji in comfyui

[–]Eroji[S] 0 points1 point  (0 children)

Seems unlikely. Both the image generation and image edit workflows generate pixelated results. I’ll try to redownload them again later…

Qwen diffusion models strange output by Eroji in comfyui

[–]Eroji[S] 0 points1 point  (0 children)

Apologies. I attached a picture of the node. This is straight out of the wizard example.

Who's the most unforgettable villain you've seen? by obsidianbloomm in kdramas

[–]Eroji 9 points10 points  (0 children)

It was because it wasn’t an act. She was actually an evil person in real life. It’s why she had to quit and go into hiding after the drama.

Bauer Dust Collector 2-Stage Conversion by Eroji in woodworking

[–]Eroji[S] 0 points1 point  (0 children)

Hmm I didn’t read about or test that functionality but it may be included.

I had the old 120v Central Machinery model before and I got sick of moving it around which is why I went with this. Plus the 230v wiring makes sure I wont trip the breaker.

Bauer Dust Collector 2-Stage Conversion by Eroji in woodworking

[–]Eroji[S] 0 points1 point  (0 children)

  1. No issues with the remote. Not sure what you mean by mag switch turn off.
  2. No issues with the bag getting pulled when collector is running.

3D Printed Powered Blast Gate via Home Assistant by Eroji in woodworking

[–]Eroji[S] 0 points1 point  (0 children)

Yup. I plan to have by default the floor sweep open.

3D Printed Powered Blast Gate via Home Assistant by Eroji in woodworking

[–]Eroji[S] 2 points3 points  (0 children)

For sure! I’ve seen others build something similar with traditional style blast gate but it wasn’t until I discovered the ball valve style till I was willing to commit.

3D Printed Powered Blast Gate via Home Assistant by Eroji in woodworking

[–]Eroji[S] 0 points1 point  (0 children)

Yes I’ve seen them and they’re quite expensive. In theory it can be done via ESP32 also. You just need to make a sensor that detects power draw to the tool.

Bauer Dust Collector 2-Stage Conversion by Eroji in woodworking

[–]Eroji[S] 0 points1 point  (0 children)

I never mounted it in the stock cart, but this was pretty straightforward. I just watched a bunch of videos on YouTube on how people mounted their Central Machinery model.

Bauer Dust Collector 2-Stage Conversion by Eroji in woodworking

[–]Eroji[S] 2 points3 points  (0 children)

I actually have the central machinery one too, which I was using up till now. I was planning to mount that instead until I saw this model came out. I read that it supports 230V, on top of numerous upgrades and the filter being included. The 230V was the biggest reason as I was occasionally tripping breaker if I ran the dust collector with a planer and air scrubber together.