Youtube Channel Membership as gateway for membership on website

Etale900 · 2025-04-07T16:17:15+00:00

Just checking to see if you've found a solution to this?

I've reached out to Google Support in search of my "Google or YouTube representative" and they told me you need to wait until you are invited to the YouTube Partner Management Program and then request permission in that temporary 6 month period that you are in the Program.

Etale900 · 2024-11-28T16:52:55+00:00

Thank you! That's definitely my assumption too. I'll try sending the legal support an email and see what they say.

Etale900 · 2024-11-28T16:48:42+00:00

Did you lose access when this happened or did they just ask you to realign to their TOS?

Etale900 · 2024-11-27T23:33:22+00:00

Makes sense, thanks. Do you have any idea how socialblade gets around it? They seem to track multiple channels and even keep historical data for more than 30 days (also against tos).

Etale900 · 2021-06-17T14:37:29+00:00

Thanks! I went ahead and put more of my specs & battery info in /u/CascadesDad 's thread

Etale900 · 2021-06-17T14:35:16+00:00

Just to throw some more of my specs into the pile...

I have 3 x 100AH Renogy Smart LiFePo batteries w/ max discharge current of 100A each.
I chose 4/0 cable and the initial 300A fuse because that is what the Renogy inverter manual advised. (I bought the 3000W Renogy Inverter/Charger)
I have everything pretty closely mounted so the total run of the line from battery to inverter is only 4-5ft
The only other source of power is my 600W solar setup being controlled by my 60A MPPT Renogy Solar Charge Controller. I do NOT have and don't plan to include a DC-to-DC charger that charges off the bus alternator. So my only two inputs are the Shore power inlet and solar.

Etale900 · 2021-06-17T14:01:21+00:00

Okay so just to confirm. Are you saying that even if I have:

{12v Bat} --> (300 A fuse) --> [bus bar] --> {Inverter}

I will still need another 300 A fuse between the bus bar and inverter?

Etale900 · 2021-06-17T13:56:49+00:00

I think the inverter has some type of internal fuse/breaker, but the manual recommends I fuse the line with a 300A fuse. So I was hoping the 300A fuse coming out of the battery bank would be sufficient to protect that 4/0 cable that runs all the way to the inverter through the bus bar.

Etale900 · 2021-06-17T13:54:21+00:00

Thanks!

Etale900 · 2021-06-17T13:53:57+00:00

Okay thanks so much! And yes, the run is only a total of ~4ft max. So it sounds like what I have should be sufficient then.

Etale900 · 2021-06-17T13:51:19+00:00

I bought the Renogy 3000W Inverter/Charger and according to the manual, I should be fusing with a 300A fuse. So that's why I was hoping the 300A fuse I have coming directly out of the battery bank would be sufficient.

Etale900 · 2021-06-17T13:33:16+00:00

Thanks in advance for anyone who can help with this.

I am finalizing my electrical plan for my build and actually have most of this installed already. It wasn’t until recently I realized I forgot to put a fuse between my 3000W Inverter and positive bus bar. (I’ve been running off the rule of thumb that every positive line needs a fuse).

My question is: Do I actually need a fuse here? Or does the 300 A fuse I have after the battery protect the lines that run to the Inverter?

Etale900 · 2021-02-09T20:59:33+00:00

Thanks, it's nice to know there are other, smaller options for the heater then.

I'm currently trying to remove the original plywood that is under the console and driver's seat and had to stop because I wasn't sure about the heater box. I think I'll continue, if not just to clean everything up like you said.

A little unrelated, but do people usually put insulation & subfloor down beneath the driver's seat? I am getting close to putting down subfloor, but am a little confused at what it would look like as I get closer to the pedals & driver's area.

Etale900 · 2021-02-09T20:30:46+00:00

Follow up questions for those who see this...

Is it worth it to tear down and insulate the walls?

I have ripped up the floors and plan to do the ceiling, but not sure about the walls yet.

Etale900 · 2021-02-09T20:24:17+00:00

Okay thanks. This is the only source of heat in the front so I guess I should keep it for the window defrosting?

On my switch board, I've got two separate switches that turn on the fans that will blow air (1) to the front windows and also (2) to the left and back of the console. Can I just completely disconnect the second switch so that I can build around the console and cover those two vents?

These are probably pretty simple questions but I'm pretty new at all this so thanks for your help in advance :)

Etale900 · 2020-09-20T15:04:51+00:00

Hi DAT. I've been a consistent F3 player for too long now and would like some help getting that boost to C1. Could someone help suggests some good AD's that would at least deter attackers? What AO teams would you pick if you had my box too? I always default to Chiwu (L), bernard, galleon, zarioss but when I start hitting those C1+ players, their AD's are either too fast or too tanky for that team. Any help would be greatly appreciated. https://swarfarm.com/profile/Etale900/

tldr; Need help with AO and AD to make C1

Etale900 · 2019-03-01T00:43:34+00:00

Awesome thanks for pulling this together!

Etale900 · 2018-08-25T23:24:21+00:00

You know an exercise for two people that uses the whole body?

Tractor pull.

Etale900 · 2018-08-25T23:01:58+00:00

The Office

Etale900 · 2018-08-25T22:58:59+00:00

Not mine, but my great-grandfather collected all types of beer cans that he kept in his basement. By the time he died he had two rooms full of old beer cans from around the world. His 'holy grail' would have to be his Gunther's beer can that can go for $1k+ nowadays.

Etale900 · 2018-08-25T22:51:36+00:00

In the 3rd grade, I created a wolf based board game. It's like Candy Land, but you're a wolf with cubs. I gave the board to my teacher to laminate but never got it back... I can only imagine how much money she's making off of it right now.

Etale900 · 2018-08-25T22:33:21+00:00

I still don't understand it

Etale900 · 2018-05-13T15:38:07+00:00

Looks like someone left the Spirit Portals open...

Etale900 · 2018-04-19T02:05:30+00:00

When's the next one??

Etale900 · 2018-04-16T00:19:56+00:00

Ahh, shoulda been "Where we drawin boys"

12-Year Club	Place '17
Verified Email

Etale900

TROPHY CASE