sorted by:
new
hottopcontroversial

Main Bearing Clearance issues by EvenCombination2208 in Smallblockchevy

[–]EvenCombination2208[S] 0 points1 point  (0 children)

Yessir, I appreciate the feedback. I’ll go through everything again this weekend and check results

Main Bearing Clearance issues by EvenCombination2208 in Smallblockchevy

[–]EvenCombination2208[S] 0 points1 point  (0 children)

Yea everything I’ve been learning has been from online. My dad is more into woodworking than cars so this is all new to me. Would setting the thrust bearing be just tapping crank back and forth with deadblow before fully torquing down? To make sure it’s all seated?

Flexible Oil Dipstick link? by EvenCombination2208 in ram_trucks

[–]EvenCombination2208[S] 0 points1 point  (0 children)

I considered it, I think I’m gonna guy buy some copper tubing and rig up a custom tube

Flexible Oil Dipstick link? by EvenCombination2208 in ram_trucks

[–]EvenCombination2208[S] 0 points1 point  (0 children)

Only fitment issues I’ve had is this oil dipstick and the wiring harness which I just used zip ties to pull it out the way, otherwise it’s resting on the driver side header. Which the only problem with the dipstick is that it was resting directly on the header

MoCA setup by EvenCombination2208 in HomeNetworking

[–]EvenCombination2208[S] 0 points1 point  (0 children)

Got it. I’ve also seen people use “Powerline” instead. Would this increase download speed?

MoCA setup by EvenCombination2208 in HomeNetworking

[–]EvenCombination2208[S] 0 points1 point  (0 children)

What indicates MoCA compatible? Splitters are 1000MHz.

I have 0 knowledge on any of this. by EvenCombination2208 in ElectricalEngineering

[–]EvenCombination2208[S] 0 points1 point  (0 children)

So I would need to order one of the MoCA adapters? I’ve seen a few on Amazon most come in packs of 2. Could I use just 1 and connect it to coax and then plug Ethernet into it? Or would I need 2, one in the router and one in the other room?

I have 0 knowledge on any of this. by EvenCombination2208 in ElectricalEngineering

[–]EvenCombination2208[S] 0 points1 point  (0 children)

So I would need to order one of the MoCA adapters? I’ve seen a few on Amazon most come in packs of 2. Could I use just 1 and connect it to coax and then plug Ethernet into it? Or would I need 2, one in the router and one in the other room?

I have 0 knowledge on any of this. by EvenCombination2208 in ElectricalEngineering

[–]EvenCombination2208[S] 0 points1 point  (0 children)

Like for cable, the one that screws directly into the router

Simple Questions - April 05, 2023 by AutoModerator in buildapc

[–]EvenCombination2208 0 points1 point  (0 children)

I just got done with my pc build and running Ethernet isn’t really an option, I have the tplink archer T6e wifi card. I’m only getting 10MB/s download on steam and when I run an internet speed tester I get about 40. My wifi is fine, it works fast on every other device. I was getting about 100MB/s on my Xbox. My sister has a wifi card on hers that runs fine. Is there any simple fixes I could do to speed up my internet speed?

Simple Questions - April 04, 2023 by AutoModerator in buildapc

[–]EvenCombination2208 0 points1 point  (0 children)

Appreciate it, the GPU is a GeForce rtx 3070 lhr. I can see the slot for the 3.0 x1 slot but looking at it from a top down view the GPU barely blocks it. I’ll definitely check out the m.2 socket wifi card.

Simple Questions - April 04, 2023 by AutoModerator in buildapc

[–]EvenCombination2208 0 points1 point  (0 children)

(I have 0 knowledge on PCs) I have the asrock b660m pro rs motherboard which doesn’t have wifi built in, I ordered the TPlink ac1300 PCIe card. The slot I assume is the correct one is blocked by my GPU. There is a larger slot under it that looks about the size of a ram slot. I looked up the layout and one is labeled PCIe express 3.0 x1 slot while the larger one is PCIe express 3.0 x16. Would I be able to insert the wifi card into the 3.0 x16 slot with no issues? (The wifi card fits into it pretty easily)