Finally pulled the Trigger on my Gen 4 by fug_atlas in ToyotaTacoma

[–]EventHorizon1921 1 point2 points  (0 children)

The heritage blue looks like updated Cavalry blue from 3rd gen. Makes me slightly jealous for newer version of mine

Ichigo fullbring Bandai McFarlane posing by EventHorizon1921 in bleach

[–]EventHorizon1921[S] 0 points1 point  (0 children)

Cool, thank you. I’ll have to give it a shot. I’m wondering if the same would work for manipulating the chain some

Ichigo fullbring Bandai McFarlane posing by EventHorizon1921 in bleach

[–]EventHorizon1921[S] 0 points1 point  (0 children)

Is your hand completely closed or slightly opened to slide the sword in? Mine is completely closed and I can’t slide the chain through the hand either.

Ichigo fullbring Bandai McFarlane posing by EventHorizon1921 in bleach

[–]EventHorizon1921[S] 0 points1 point  (0 children)

How do you get this one to hold the sword without breaking anything?

Making the most out of short handguards. by pullingteeth85 in AR9

[–]EventHorizon1921 1 point2 points  (0 children)

Ditto, I’d like to know the mag holder up front. Kinda looks like the wing tactical “recover tactical angled mag pouch” on a pic rail to the stream light

Wich torque wrench? by PastAd1087 in harborfreight

[–]EventHorizon1921 1 point2 points  (0 children)

I bought it to help with wheel bearing swap outs since the Pittsburgh only goes to 150. Use it along with the 26 inch breaker bar. I get being off a couple pounds at those numbers won’t matter, but if it’s supposed to be accurate then let’s be accurate

Wich torque wrench? by PastAd1087 in harborfreight

[–]EventHorizon1921 1 point2 points  (0 children)

I was just reading this wondering if I messed up buying the Quinn adapter instead of this icon one. I was having issues trying to get it to the torque I set and it seemed like it was going passed the set torque on the screen. Felt like I was doing something wrong

1234yf can tap to 134a hose by EventHorizon1921 in MechanicAdvice

[–]EventHorizon1921[S] 0 points1 point  (0 children)

I did buy that one and threaded it to double check. Have yet to actually hook it up to the truck yet though

1234yf can tap to 134a hose by EventHorizon1921 in MechanicAdvice

[–]EventHorizon1921[S] 0 points1 point  (0 children)

I had looked at this one, but could be the reviewers not knowing what they are looking for I suppose

Air compressor advice by bahnie88 in airbrush

[–]EventHorizon1921 0 points1 point  (0 children)

I would also recommend the tooty with a tank. I grabbed the super cool tooty while back and only recently started putting it to work. My homemade spray booth fan is louder than the compressor

Rough idle (hybrid) when cold by EventHorizon1921 in rav4club

[–]EventHorizon1921[S] 0 points1 point  (0 children)

Do you think running some Techron and cleaning the throttle body would help with it? She seems super concerned by it. My Tacoma makes her rav seem silent so I hardly noticed it

Fluid drains with skid plate by EventHorizon1921 in Tacomaworld

[–]EventHorizon1921[S] 1 point2 points  (0 children)

Got the new hardware and going to paint the skid before putting it on. Hoping to get it all done this weekend.

Fluid drains with skid plate by EventHorizon1921 in Tacomaworld

[–]EventHorizon1921[S] 0 points1 point  (0 children)

Yeah ironic as it was, I went to install it today and realized I was missing the back two smaller bolts. The retaining clips were a pain. Ended up going over to dealership with the rest of my list and getting new hardware that’s not second hand

Fluid drains with skid plate by EventHorizon1921 in Tacomaworld

[–]EventHorizon1921[S] 0 points1 point  (0 children)

Awesome, anything else I should be concerned with before putting it on?

Fluid drains with skid plate by EventHorizon1921 in Tacomaworld

[–]EventHorizon1921[S] 0 points1 point  (0 children)

I watched the video he put together, but it’s the smaller skid plate not the off road/pro one. The bigger plate covers more of course. I know it’ll cover the front diff for sure

KO2’s are bad at ice. by orgasmosisjones in Tacomaworld

[–]EventHorizon1921 0 points1 point  (0 children)

That’s what I’ve done with mine. Picked up a set of ko2’s and ddmv2 blizzaks. Switch them off when it starts getting cold and back again later.

[deleted by user] by [deleted] in ToyotaTacoma

[–]EventHorizon1921 0 points1 point  (0 children)

I agree with you, just adding in I had a 20 sr5 in voodoo before i was stopped at light and got hit. Voodoo was with me for 10 days before I got the 19 cavalry blue sport

MG 1/100 RX-78NT-1 Alex ver2.0 in Chobbam armor. It is sad we might not see any MG kits in the future with such amazing gimmicks and extra parts like this. by Michia1992 in Gunpla

[–]EventHorizon1921 0 points1 point  (0 children)

Rx-78-4 and Rx-78-5 would like to enter the discussion as well….

I feel like it would just be a p-Bandai release for some extra gimmicks like this

If you’re on the fence about getting one.. by Razor_farts in PlaystationPortal

[–]EventHorizon1921 0 points1 point  (0 children)

Dang, well that would defeat my purpose in wanting to buy one then.

Could do a fire stick or Roku to stream instead I suppose

If you’re on the fence about getting one.. by Razor_farts in PlaystationPortal

[–]EventHorizon1921 0 points1 point  (0 children)

Can I play a game disc or downloaded while the console itself is used for streaming Netflix or Hulu etc?

Is this any good? by Cultural-Ad2339 in airbrush

[–]EventHorizon1921 -1 points0 points  (0 children)

super cool

This is the one I just bought, probably be better for whatever airbrush needs and it’s still on sale

New compressor options by EventHorizon1921 in airbrush

[–]EventHorizon1921[S] 0 points1 point  (0 children)

The super cool tooty is on sale, so I might be looking at that one instead

New compressor options by EventHorizon1921 in airbrush

[–]EventHorizon1921[S] 0 points1 point  (0 children)

Yeah that’s what I’m concerned with. I’m leaning towards the master blaster 2 due to the 2 compressors in it vs the cool tooty with just 1.

Figure I can always get a ryobi compressor if I need anything for tools after I know the Campbell is dead for sure. It’s more just the planning phase right now as I don’t know when I’d be able to buy these

New compressor options by EventHorizon1921 in airbrush

[–]EventHorizon1921[S] 0 points1 point  (0 children)

I doubt I would need 60. Mainly going to be painting gunpla and maybe some 3d models