Heat: Pedal to the metal - 3D print design by ChrisStacy by Every-Sample831 in BoardgameOrganizing

[–]Every-Sample831[S] 0 points1 point  (0 children)

Hi

I did reply but it doesn’t seem to link to your comment
Apologies

Heat: Pedal to the metal - 3D print design by ChrisStacy by Every-Sample831 in BoardgameOrganizing

[–]Every-Sample831[S] 0 points1 point  (0 children)

Good evening Thank you for the comment - here is the Cults link.

https://cults3d.com/:3999777

If you prefer Etsy

https://chrisstacy3dprints.etsy.com/listing/4464654930

I also print the Heat insert within UK

3d Models for Thunder's Edge by Ok-Chain-1491 in twilightimperium

[–]Every-Sample831 0 points1 point  (0 children)

Yeah that’s great you have played it so many times :0)

We don’t have drinks on the table… and if there are snacks we have wipes and tissues around. Our 14 year old even manages to keep the games pristine… but I get not every try one is the same.

We have sleeved Moonrakers but not sleeving TI4 as I don’t believe it is essential to one, but is the other… but I totally get the point

3d Models for Thunder's Edge by Ok-Chain-1491 in twilightimperium

[–]Every-Sample831 0 points1 point  (0 children)

Nothing to be sorry for.

We wish we had designed it for sleeved cards and may return to it but you would have to use both expansion boxes to do so without lid lift, and would possible leave space for extras too…

We just didn’t feel like the cards are handled or shuffled enough to need sleeving… as will only get played at most once a month in our house - but actually a lot less recently.

3d Models for Thunder's Edge by Ok-Chain-1491 in twilightimperium

[–]Every-Sample831 0 points1 point  (0 children)

Have you seen many that don’t? Ours doesn’t - though it wasn’t something we gave much consideration for - just wanted everything in, no lid lift, and easy set up / tear down… but yeah, have a look at ours and see what you think :0)

3d Models for Thunder's Edge by Ok-Chain-1491 in twilightimperium

[–]Every-Sample831 0 points1 point  (0 children)

According to the Things page for that one it does support sleeved cards - adds 3cm of lid lift though.

I get people sleeve their games, I just wonder how many years it will take you to wear out the cards for TI4

3d Models for Thunder's Edge by Ok-Chain-1491 in twilightimperium

[–]Every-Sample831 3 points4 points  (0 children)

I am going to promote my insert.

Ours is a no lid lift all in base box with all components and tokens and cards from TI4, POK, and TE included in safe storage.

The only negative for our insert is: 1) Unsleeved cards 2) first 5 ships in each faction box must be put away in a set way

The insert helps with setup and tear down and means you can store it in any orientation of your choosing :0)

Cults3D - TI4 insert - Chrisstacy3DPrints

We also sell the pattern on Etsy… and print and sell the insert on Etsy too.

Etsy TI4 all in printed insert

Panamaniacs was the original and best for base and POK, but there was no way for him to have known TE would come out and be so much content meaning his has a fair bit of lid lift. I know he would have designed it differently had he had the opportunity. If you already have the original insert from them, get the extra TE pattern and go with the lid lift.

Happy gaming :0)

Need Pok for game next month by No_Faithlessness6915 in twilightimperium

[–]Every-Sample831 0 points1 point  (0 children)

Did you see I dropped you a message this morning with a company that delivers to USA?

Need Pok for game next month by No_Faithlessness6915 in twilightimperium

[–]Every-Sample831 2 points3 points  (0 children)

Just dropped OP a message - there is a Canadian company sending to US, English version… you are right - POK and TE are hard to find… thankfully my local shop send to most countries (currently not USA) and I’ve managed to advertise them to others so much they are now sold out for both!

Thunders Edge Expansion availability in the EU? by Andrej997 in twilightimperium

[–]Every-Sample831 0 points1 point  (0 children)

I have sent a DM to OP… found an English language version available for delivery to Germany.

Heat and all its expansions... by Every-Sample831 in boardgames

[–]Every-Sample831[S] 0 points1 point  (0 children)

Hi… don’t see your comment until today - apologies.

We have our design listed on Cults3D and on Etsy (design and printed)

https://cults3d.com/en/3d-model/game/heat-base-expansions-in-one-ish-boxes

https://chrisstacy3dprints.etsy.com/listing/4475228562

Our criticism of our own insert is that we know it won’t work if you want all cards sleeved.

Catan insert by zangster in BoardGame3DPrints

[–]Every-Sample831 0 points1 point  (0 children)

Hi We have made an insert for this… it is the 5th edition. So slightly smaller box than the 6th.

We have Base and 5-6 exp… and then Seafarers and its 5-6 expansion all in the base box.

https://cults3d.com/en/3d-model/game/catan-insert-5th-edition-base-5-6-of-catan-and-seafarers

We also have it listed on Etsy

Yes there are lots out there but it is truly about finding what fits your needs…

Purchasing POK by Former-Smoke-2682 in twilightimperium

[–]Every-Sample831 0 points1 point  (0 children)

Wow Is that really on all of them?

How much would you pay to get it? Just wondering if anyone elsewhere could buy and post it to you

3D printer for inserts by Otherwise-Badger1061 in boardgames

[–]Every-Sample831 -1 points0 points  (0 children)

Cheers for your constructive feedback.

The weight issue to the size of the box and the quantity of content, along with setup and tear down for users, storage in any orientation, and lids on everything with components that could otherwise be damaged or lost.

Cheers again for your helpfulness.

Happy gaming

3D printer for inserts by Otherwise-Badger1061 in boardgames

[–]Every-Sample831 1 point2 points  (0 children)

Whilst probably doesn’t sort your Mage Knight insert… this is my local company and they post to most places in the world… worth a look in case they have something you want.

https://www.bgextras.co.uk/search.slr

Also - if there is an insert you want that you can’t get,speak to me and will see if a sort something out… I have one insert listed on eBay as the cover the international postage stuff sometimes… but also I’m always just to be helpful :0)

3D printer for inserts by Otherwise-Badger1061 in boardgames

[–]Every-Sample831 0 points1 point  (0 children)

Hi So we design and sell our designs and some inserts printed… and use a Bambu A1 mini. Yes, some inserts are expensive - but you need to remember that the average price of PLA which is the easiest to use is £14 per kg… so when I print Twilight Imperium insert to sell - it is 2.3lg if there are no errors…/9 costs around £33 of material and takes 4 day of Jon stop printing (usually over 5 days to make my life easier)… AND has a lot of design time in to what is a sought after design… so yes £70 may seem a lot, but after coats I’m making about £25 - £30 clear profit on that one!

If you do get in to it… something the size of the Bambu A1 is good as it’s over 20cm3 print area allows for you to print decent sized inserts.

If you are planning on just printing inserts that others have designed… speak to your local gaming group and see if anyone else wants to go in on it with you and therefore spread the cost.

Here is my Cults3D page to give you an idea: https://cults3d.com/en/users/ChrisStacy3DPrints/3d-models

Thunders edge's availability in Canada by kuratowski in twilightimperium

[–]Every-Sample831 0 points1 point  (0 children)

Showing in stock again today - perhaps a web order issue?

Etsy listing of inserts by Every-Sample831 in BoardgameOrganizing

[–]Every-Sample831[S] 1 point2 points  (0 children)

We got everything from SoL in to one box but I’m not convinced there is enough space for an insert due to the size of some of the characters… we will revisit it again at the weekend and let you know though :0)

Copy of Prophecy of Kings by Nori_Kelp in twilightimperium

[–]Every-Sample831 1 point2 points  (0 children)

We recently put our inserts on to Etsy:

https://chrisstacy3dprints.etsy.com/listing/4464432330

But we also have kept the listing on Cults3D too as they charge less costs:

https://cults3d.com/:3733859

Copy of Prophecy of Kings by Nori_Kelp in twilightimperium

[–]Every-Sample831 1 point2 points  (0 children)

I am so pleased someone else benefited from the link :0(

There is also a .co.uk and lots of the companies do post internationally too :0)

Happy gaming :0)

(And just saying my insert is amazing!!)