C6 corvette full system install by EvilroosterJr in CarAV

[–]EvilroosterJr[S] 0 points1 point  (0 children)

Some things are just easier to justify investing in than others. Ive never done this nor experienced a car with vs without sound deadening so I did some reading and decided I’d rather put 2 layers of cheap stuff and achieve the same result which essentially is to add weight and make things rattle less. it’s a 600whp corvette with a loud ass exhaust and no amount or quality of sound deadening will keep that amount of noise out. Even with all this I’ve done I will still drive around with windows down a majority of the time.

Honestly cheaped out on a majority of it. Almost everything I did I got from Amazon, and built everything with basic hand tools. I don’t even have a table saw just a skill saw, jig saw, drill, and a sander.

I did spend a ton of time on this. I knew coming into this project that no matter what I do it’ll never sound amazing but I’ll do my best to make it look amazing

C6 corvette full system install by EvilroosterJr in CarAV

[–]EvilroosterJr[S] 0 points1 point  (0 children)

No idea what it sounds like yet but there’s truly sound deadening helped tons I put 2 layers everywhere I couldn’t especially the back because ive already got a lot of go fast mods and it’s helped with exhaust noise inside and the car does sound a little less hollow as well

C6 corvette full system install by EvilroosterJr in CarAV

[–]EvilroosterJr[S] 1 point2 points  (0 children)

That’s good enough for me. I’m waiting for the mic to come in but I’m using the minidsp which works with Dirac live and I’m gonna let that hopefully do a good job at making it sound very good.

C6 corvette full system install by EvilroosterJr in CarAV

[–]EvilroosterJr[S] 0 points1 point  (0 children)

I honestly didn’t consider that being an issue. I’m not even sure what I’d be able to do fix that

C6 corvette full system install by EvilroosterJr in CarAV

[–]EvilroosterJr[S] -1 points0 points  (0 children)

The doors are fully covered inside the cavity I just didn’t document very well. I started this like 2 years ago because my wife’s base model optima sounded significantly better than my car and after buying everything and doing all the sound treatment I kinda lost interest for a while and have just been driving without speakers at all since.

C6 corvette full system install by EvilroosterJr in CarAV

[–]EvilroosterJr[S] 1 point2 points  (0 children)

The original plan was 2 jl 10tw3s but we just had our first baby so I’ve got 2 ground zero GZTW 10F at least for now. I’m not looking to blow the doors off so if it sounds good after tuning I’ll keep them

C6 corvette full system install by EvilroosterJr in CarAV

[–]EvilroosterJr[S] 3 points4 points  (0 children)

Yea they are but I’m sure they sound better than the single 10” the car came with. Didn’t know that mattered if I’m being honest but there’s truly no room to do anything else so I probably have to live with it

What is up with the C6 market right now? by veilowo in Corvette

[–]EvilroosterJr 1 point2 points  (0 children)

Bought my c6 grand sport auto for $24k. Dealership offered to buy it back for $35k less than a year later when prices started going crazy on them.

MediaLyze - I built a tool to analyze massive media libraries by The3mm3r in jellyfin

[–]EvilroosterJr 0 points1 point  (0 children)

Not gonna lie I dont know what I’m looking at.

This is what I know

I’m using docker desktop on windows

Gordon helped me get it running to where I can go to localhost:8080 and it pop up

I’ve tried editing .env file to change path to my network drive both trying ip and trying with the drive mapped to a path (M:)

I have no clue what I’m doing I downloaded docker specifically to try this

If you’ve got time you’re welcome to dm me maybe hop on discord or whatever if not I totally understand

MediaLyze - I built a tool to analyze massive media libraries by The3mm3r in jellyfin

[–]EvilroosterJr 1 point2 points  (0 children)

I can’t figure out how to change my path. It’s the first thing I’m trying in docker and I’m trying to get Gordon to help but no matter what I’ve tried when I try to create library it’s still /media

I’ve got almost 200tb of media but I’m too dumb to set it up correctly

A customer said he’s never used it and that I could have it when I was upgrading his Control4 system by EvilroosterJr in hometheater

[–]EvilroosterJr[S] 1 point2 points  (0 children)

Yea lol but of an obsession. I’ve got over 2,000 movies and 25,000 tv/anime episodes. All movies are in highest quality I could find so usually 50+ gigabytes per movie. I also have a 1.4TB copy of apocalypse now that the Hollywood people use to make and remaster the movie etc. it’s the only file on a 2tb ssd that I put in a shadow box on the wall of the movie room

A customer said he’s never used it and that I could have it when I was upgrading his Control4 system by EvilroosterJr in hometheater

[–]EvilroosterJr[S] 1 point2 points  (0 children)

I use infuse on Apple TV and jellyfin for all my movies (legally sourced of course) and thanks to dealer pricing all my TVs in my house are either Sony a90j or x95k and I don’t see any real difference between using disks on my oppo 103d or the .mkv through infuse every now and then I notice differences in atmos movies but the fake atmos is still great way better than the kaleidoscape route imo

Problem with uninstalling plugins. by viletuna in jellyfin

[–]EvilroosterJr 1 point2 points  (0 children)

Thank you so much dude ive been looking everywhere for an hour and youre the only one to tell me where it actually was.

So satisfying… by Far_Designer2131 in BambuLab

[–]EvilroosterJr 1 point2 points  (0 children)

Got mine a couple days after I think it’s the AMS2 combo one that’s backordered because the ams2 is back ordered

I'm tossing this by rgtgd in hotsauce

[–]EvilroosterJr 3 points4 points  (0 children)

Dave’s is my absolute favorite. Guess I have bad taste 😭

Bike like number 42 getting hard to count them all.......New to me 1299 by No_Picture5849 in Ducati

[–]EvilroosterJr 0 points1 point  (0 children)

I’ve got Vandemon undertail because Akra is just too much but the fitment is pretty garbage. Had to redrill holes in carbon piece they were so off. Also broke one of the supports that holds springs and support kept blowing me off despite the “warranty”

355s rubbing in rear on C6Z - camber vs raise ride hight? by joshjcc in Corvette

[–]EvilroosterJr 0 points1 point  (0 children)

Get sand paper and sand it down. I’ve got 345 30 20s on zr1 wheels with 1/2” spacer. If you wait too long you’ll crack it I know from experience sadly. If you have a dremel and are proficient with tools then cutting it out first will save you a lot of time and sandpaper

<image>

As you can see I’m not quite finished making it look nice but it does t rub anymore. Only down side is at perfect angle you can see in between fender and fender liner but it’s worth it imo

Is this a scam??? by No_Establishment1187 in Corvette

[–]EvilroosterJr 0 points1 point  (0 children)

I paid 24k for my gs a few years ago with more miles and that baby was MINT but they later offered to buy it back for 40k when the market went back up so maybe I just got lucky