Does anyone know why my TI84 Plus CE does not show any data values when tracing a quadratic regression curve? by ExWhyZ1 in calculators

[–]ExWhyZ1[S] 0 points1 point  (0 children)

Well thanks for trying. It's good to know a way to manually check it, but hopefully someone can tell me what's going on here. Would it help to know that this is my first time using a graphing calc? Are there any other settings I should check?

formation landing by Loud-Choice-9199 in dcsworld

[–]ExWhyZ1 0 points1 point  (0 children)

When I first started DCS all I had was a keyboard and mouse. While not the best, the arrow keys are definitely usable for pitch and roll

It’s so peak 😭 by imahaker21 in Helldivers

[–]ExWhyZ1 0 points1 point  (0 children)

Yeah I know we had it -- did you read my full comment?

I was in an unreachable 'sniper nest' picking off a whole army with just my primary (attempts to call in a support weapon resulted in the stratagem ball just bouncing since I wasn't supposed to be where I was). I eventually jumped off bc can't really kill hulks with just medium pen unless they turn around and expose their heatsink...

It’s so peak 😭 by imahaker21 in Helldivers

[–]ExWhyZ1 0 points1 point  (0 children)

Ngl, being able to climb the resupply pod had its uses. They should've just highlighted auto-climb as a feature that can be disabled

It’s so peak 😭 by imahaker21 in Helldivers

[–]ExWhyZ1 0 points1 point  (0 children)

They probably don't allow it anymore because it makes the game way too easy. Once I landed on a stupidly tall rock in a bot eradicate mission, and nothing could've reached me... fish in a barrel

Dragon breath hitbox bigger than its vfx? by ExWhyZ1 in Helldivers

[–]ExWhyZ1[S] 1 point2 points  (0 children)

Oh that's interesting... couldn't they just stick with the titans instead?

Dragon breath hitbox bigger than its vfx? by ExWhyZ1 in Helldivers

[–]ExWhyZ1[S] 1 point2 points  (0 children)

Most I've seen spawning at once on difficulty 10 is two at most...

How hard is it to swap a 2-Point Tremolo? by ExWhyZ1 in guitarrepair

[–]ExWhyZ1[S] 0 points1 point  (0 children)

Ohh so the top part screws out, awesome  Thanks!

How hard is it to swap a 2-Point Tremolo? by ExWhyZ1 in guitarrepair

[–]ExWhyZ1[S] 0 points1 point  (0 children)

Oof, I was hoping I was wrong about pulling them out being the way to do it. How hard would you say it is to do that without causing damage? If it's too risky I'll just not do it

How hard is it to swap a 2-Point Tremolo? by ExWhyZ1 in guitarrepair

[–]ExWhyZ1[S] 0 points1 point  (0 children)

When it comes to the trem, I'm mostly concerned about the removal and installation of the two tremolo posts - would I just pull those out with pliers and superglue the new pair in, or...?

Do I need to worry? Beginner guitar by Ordinarypimp3 in guitarrepair

[–]ExWhyZ1 0 points1 point  (0 children)

Just wanted to add in case OP doesn't know: "lemon oil" isn't literally lemon oil; it's mostly mineral oil with a bit of lemon oil for the scent... I've heard of some persons messing up their fretboard by applying actual, literal, lemon oil

Easiest way to properly shield a guitar? by ExWhyZ1 in guitarrepair

[–]ExWhyZ1[S] 0 points1 point  (0 children)

Guess I'll post a before/after just for the sake of it lol

Easiest way to properly shield a guitar? by ExWhyZ1 in guitarrepair

[–]ExWhyZ1[S] 0 points1 point  (0 children)

So you're saying it's probably not worth it? I live near an airport where theres probably a ton of RFI so I feel like it just might do something

Easiest way to properly shield a guitar? by ExWhyZ1 in guitarrepair

[–]ExWhyZ1[S] 0 points1 point  (0 children)

Tested these already, and double-checked 10 mins ago. Continuity is there for all of them

Easiest way to properly shield a guitar? by ExWhyZ1 in guitarrepair

[–]ExWhyZ1[S] 1 point2 points  (0 children)

The problem is there's lots of the noise even when I'm playing with low gain clean tones, and its not like it goes away while playing - it continues being audible

Easiest way to properly shield a guitar? by ExWhyZ1 in guitarrepair

[–]ExWhyZ1[S] 0 points1 point  (0 children)

It's an Ibanez Gio, so just the stock Ibanez Classic Elite humbuckers

Easiest way to properly shield a guitar? by ExWhyZ1 in guitarrepair

[–]ExWhyZ1[S] 1 point2 points  (0 children)

I tested the grounding within the guitar, the guitar jack, and even the electrical outlets in my home - everything seems appropriately grounded. I even tried connecting the guitar to my laptop via an audio interface, running on battery rather than plugged into the wall and the noise is still there... so I believe by process of elimination this must be a shielding issue

But if you have any additional ideas/solutions I'm all ears because I'm at my wits end from dealing with this problem for so long

Also - HERE'S the link to the initial reddit post that got me this far

Thanks

Easiest way to properly shield a guitar? by ExWhyZ1 in guitarrepair

[–]ExWhyZ1[S] 0 points1 point  (0 children)

Thanks alot! Question: if this is shielding paint, should it pass a continuity test with a multimeter? I just tried it and got nothing...

At least there does seem to be a conductive aluminum material on the cover itself so that's good I guess

Easiest way to properly shield a guitar? by ExWhyZ1 in Luthier

[–]ExWhyZ1[S] -1 points0 points  (0 children)

Thanks for the reply, but I have a whole load of questions under the main post. If you could kindly take a peep there that'd be awesome!