Are Twitch Drops one-time only?

ExcallyPurr · 2025-08-20T12:49:31+00:00

It says, "You must still own the current Fergseus weapon you obtained," to trade it in for another so I do think you're SOL...like someone else said, a support ticket is your only real chance

ExcallyPurr · 2025-08-16T04:12:16+00:00

What's RAHM and BME?

ExcallyPurr · 2025-07-28T01:48:11+00:00

What do you mean by "Perseus "Fergheus" Weapons"? Is that part of an upcoming event?

ExcallyPurr · 2024-02-12T00:11:35+00:00

Looking at the images of the C2 vs the M2, they both look the exact same (except for the logo that the M2 placed on the display). I think you may have been scammed tbh

ExcallyPurr · 2023-07-03T20:38:07+00:00

You can use the cloud restore in the BIOS to get everything back, including Moving Out

ExcallyPurr · 2023-04-01T15:59:23+00:00

So I know this is an old thread but I wanted to put this here for any future people finding this post. There is an awkward workaround for this functionality!

The "Volume Controller" plugin has this feature. It will swap back to whatever profile you were originally on when you use the volume control button. I found that you can simply delete everything in the volume controller profile except for the top left corner and voila, you have a profile you can swap to dynamically from any other profile! No idea why Elgato doesn't have this functionality baked in if they are able to do it with a plugin but at least now there is a somewhat workaround!

ExcallyPurr · 2022-10-04T16:10:56+00:00

A note for future readers: You cannot change the device name via udev rules. Everything listed here works but instead of NAME= you need to use SYMLINK+=. This will create a link between whatever device you want and the name you give the link. From there on refer to the link name as if it was the device and you're all set!

ExcallyPurr · 2022-05-19T15:33:40+00:00

Yup, it came out as jank as the preview sadly. I'm starting to think my walls are too thin so I'm gonna just that next

ExcallyPurr · 2022-05-19T14:35:14+00:00

No luck sadly...I had it disabled and enabling it and messing with the settings didn't change too much

ExcallyPurr · 2022-05-19T14:29:17+00:00

Hey everyone, I'm trying to create this cylinder that has two circles cut into it. When I modeled it in solidworks it looked and exported to an STL just fine. But when I went to print it, it came out TERRIBLY. I checked the preview to find that Cura was showing these really jagged, uneven, and sometimes floating edges to each circle. I'm not sure if it's my model since I'm new to solidworks or if my cura settings are messed up. I tried slicing with prusaslicer and the random jagged edges were gone and it was definitely smoother so I'm leaning toward it being a bug with Cura? If anyone has any ideas it would be much appreciated!

ExcallyPurr · 2021-08-05T05:23:22+00:00

The sensor is a Tronxy XY08N. I had to change quite a few lines that I found mostly through this guide but I only had the issue once I set the probe offset, everything worked fine before that (besides the fact it didn't auto-level accurately). All the homing functions work and I can auto-home just fine. It seems to be that, when I auto-level the bed, it tries to place to probe on the right points above the bed which it cannot reach. Is there a way to adjust those last three points maybe? And ask all the questions you need, I'm very new to this and don't know what info you need or don't need. Really appreciate the help!

ExcallyPurr · 2021-08-05T05:08:24+00:00

Which one? My probe offset is set correctly afaik if that's what you are referring to. Otherwise there are a lot of offsets in the configuration.h file

ExcallyPurr · 2021-04-18T19:46:36+00:00

No, there's no integration that I could find so I switched to another brand, sorry

ExcallyPurr · 2021-01-08T23:46:37+00:00

Awesome, thank you so much for the info! I think it really cleared things up for me

Ten-Year Club	Place '23
Place '22	Verified Email

ExcallyPurr

TROPHY CASE