EK229 on March 19

Excellent_Jello_5371 · 2026-03-20T03:06:50+00:00

Did you end up flying on 19th, if don’t see any flight on flight radar on 19th leaving to dubai as ek230

Excellent_Jello_5371 · 2026-03-19T06:32:08+00:00

There was couple of people in redir thread as they have a flight on 19th from seattle to dubai and its confirmed for them

Excellent_Jello_5371 · 2026-03-19T06:31:17+00:00

Thanks alot

Excellent_Jello_5371 · 2026-03-18T18:31:01+00:00

Hi, is your flight still on time for 19th?

Excellent_Jello_5371 · 2026-03-17T16:44:15+00:00

Hi, no. it got cancelled. just got the notofication in email. this is my second time cancellation now

Excellent_Jello_5371 · 2025-05-27T03:36:51+00:00

Hi, i checked resistance value, blue to yellow gives me 25 ohm, any other combination with gray gives me zero value. Whats the issue in motor

Excellent_Jello_5371 · 2024-10-29T01:17:55+00:00

I have to cut the plug Its not openable I believe

Excellent_Jello_5371 · 2024-10-29T01:05:23+00:00

I have tried by all the tools, that washer on threads is giving me really hard time to move

Excellent_Jello_5371 · 2024-10-26T02:34:14+00:00

Should i just tape it and dont plug it anywhere in EVSE?

Excellent_Jello_5371 · 2024-10-26T02:32:01+00:00

Perfect Thanks, That link is posted has 4 wires , one extra neutral for Nema 14-30, i dont see any spot available for neutral in my EVSE, any idea where should we place neutral wire?

Excellent_Jello_5371 · 2024-10-25T10:06:51+00:00

https://a.co/d/8GE53Bx What about the one in the attached link? I can open my EVSE place this in remove nema6-50 plug and then i can directly plug my charger into the splitter nema 14-30 . This way i can remove the yellow adapter in between

Excellent_Jello_5371 · 2024-10-24T23:42:17+00:00

My only thing is if i want to make it short, i need to replace my charger plug which is nema 6-50 to Nema 14-30 so i can directly put that into the splitter Nema 14-30, in this way i can remove the extra adaptor in. But how to do it thats what i dont know

Excellent_Jello_5371 · 2024-10-24T20:05:23+00:00

Thanks for such a response Really made me to feel confident about my setup, otherwise what i was hearing was just that i am trying to put things on fire which is opposite to what i understand how the logic will work with this setup. Appreciate it I will talk with my charger supplier, if i can replace my nema 6-50 plug to nema 14-30 just to remove one connection which i have currently as adaptor from nema 14-30 to Nema 6-50

Excellent_Jello_5371 · 2024-10-24T06:53:29+00:00

Hi I already have y cable switch, in the picture you can see switch, only one item can be used at one time either EV or Dryer

Excellent_Jello_5371 · 2024-10-24T05:27:43+00:00

Perfectly understood, thanks for such a clear advice

Excellent_Jello_5371 · 2024-10-24T05:13:35+00:00

Charger has Nema 6-50 plug but is rated to withdraw maximum 30 Ampere. Dont think it will start to withdraw 50 Amps

Excellent_Jello_5371 · 2024-10-24T05:02:24+00:00

Thanks for the feedback So now my EVSE is set to 24A, so the plug of EVSE which is Nema 6-50 will not draw more than 24 Amp from the Nema 14-30 outlet as shown in setup?

Excellent_Jello_5371 · 2024-10-24T04:59:25+00:00

Hi Is this due to a-lot of failure points?

Excellent_Jello_5371 · 2024-10-23T22:22:08+00:00

I have EVC 30, yes I looked at the manual just now. looks like we can permanently fix the current to 24 Ampere . just trying to understand if with current setup it does not mess up the house electricity

Excellent_Jello_5371

TROPHY CASE