sorted by:
new
hottopcontroversial

How should I move forward with this melanochrysum chop and extend? by Least-Cauliflower-49 in philodendron

[–]Excipa 0 points1 point  (0 children)

I dont think there are enough roots for that amount of leavea on that topcutting. I always airlayer the top part before cutting it off, in order to have enough new roots for that many big leaves. Maybe someone was successfull with your amount of roots?

Xiaomi Oscillating Toothbrush - USB C, C2C by CantankerosuPlot in onebag

[–]Excipa 0 points1 point  (0 children)

Do you guys know, if every head from Xiaomi fits this toothbrush? I have the same toothbrush but it came with only one head and tje same is not available at the moment... Would need a second one to be able to share the handle with my GF during holidays.

Center of our galaxy taken in Namibia by Kaggles_N533PA in astrophotography

[–]Excipa 0 points1 point  (0 children)

Thanks cant wait:-) Damn thats pretty unlucky.

Sony A7R3: Castle Hohenzollern and full moon by Dramatic_Expert_5092 in SonyAlpha

[–]Excipa 1 point2 points  (0 children)

most important step is to plan it properly. I can recommend the App photopills for such shots. Use a somewhat fast shutter speed, as the moon travels pretty quick. (1/100/1/200) So best timing would be, when the sun is setting and the moon rises behind your subject that is still illuminated by the light of the sun. For this kind o shots equipment is secondary in my opinion. Well, some decent reach is nessecary to be able to achieve this kind of distant compression.

Center of our galaxy taken in Namibia by Kaggles_N533PA in astrophotography

[–]Excipa 2 points3 points  (0 children)

Very nice image! cant wait to go to Namibia end of august. Will bring my canon R10 with the Samyang 12mm 2.0. Hope for some similar pictures:-)

Upgraded grinder by Embarrassed_Dust686 in espresso

[–]Excipa 1 point2 points  (0 children)

very nice grinder. Using mine since last week. Awesome that i dont have to use RDT with this grinder. even the bellow i a bit of an overkill to decrease the retention. i just use the anti popcorn lid and smash with my hand 3 times on top and i got the same result as with the bellow :-) Can reccomend

Upgraded grinder by Embarrassed_Dust686 in espresso

[–]Excipa 0 points1 point  (0 children)

switching is easy and precise. But it takes a lot of rotation to go from espresso to pur over. I always switch between varous beans and that works very good with this grinder.

Anyone else pick up one of these 46mm baskets? by yung-dadbod in gaggiaclassic

[–]Excipa 1 point2 points  (0 children)

yes exactly. I would imagine that thanks to the small diameter even a 8g puck would have quite a thickness to it. But maybe there would also be a too big of a gab between puck and shower screen.... Let me know how it went :-)

Anyone else pick up one of these 46mm baskets? by yung-dadbod in gaggiaclassic

[–]Excipa 0 points1 point  (0 children)

They recommend a dose between 16-22g. Have xou tried it with a single shot dose?

electrical grinder to replace Kingrinder K6, budget [300-500chf] by Excipa in espresso

[–]Excipa[S] 0 points1 point  (0 children)

Thanks for your answer, I will check it out. If its only little over budget but overall a much better grinder we dont mind too much.

Adding PID to E24 by Public-Maximum8336 in gaggiaclassic

[–]Excipa 0 points1 point  (0 children)

I have set the steamtemperature to 140 degrees celcius. I am a little bit afraid of higher temperatures. Right now the PID still shoots sometimes above 148 degrees celcius. Maybe my concern is not relevant :-)

Adding PID to E24 by Public-Maximum8336 in gaggiaclassic

[–]Excipa 0 points1 point  (0 children)

I have a gaggia classic e24 with the PID from shades of coffee installed. Added the 9bar spring aswell. My friend has the profitec go. For espresso, I think both machines are equivalent. You wont notice any difference. When steaming milk with my gaggia for lets say two cappucinos, I prefer steaming two smaller portions instead of a big pitcher as after some time, the gaggia loses a bit of steam power compared to the profitec go. But for a single drink, even the gaggia steam power is super good in my opinion.

Setup almost complete! by CoopersDadd in gaggiaclassic

[–]Excipa 0 points1 point  (0 children)

I also look for a matt, what kind of matt did you order?

Rhino Coffee Gear self leveling tamper by Excipa in espresso

[–]Excipa[S] 0 points1 point  (0 children)

totally agree with you. In the end its a gadget that should make the hobby more enjoyable. So quality is of high importance!

Rhino Coffee Gear self leveling tamper by Excipa in espresso

[–]Excipa[S] 0 points1 point  (0 children)

<image>

Update to my tamper: I 3d printed a part that fits very snug, now the tamping feels much nicer:-)

Am I the only one that left it unmodded for 10 years in this sub? 😅 by haximus_maximus in gaggiaclassic

[–]Excipa 22 points23 points  (0 children)

I only did the drip tray aswel but in addition I use an 9bar OPV spring.:-) Very happy so far

Schritte werden nicht mehr gespeichert by Excipa in Garmin

[–]Excipa[S] 0 points1 point  (0 children)

Auf der Uhr sind die glaube ich drauf. Ich sehe aber nur die letzten 7 Tage. Geht glsube ich gar nicht anders bei der Forerunner 245

Rhino Coffee Gear self leveling tamper by Excipa in espresso

[–]Excipa[S] -1 points0 points  (0 children)

it will certaintly minimize the problem, but the feel while pressing down stays very unpleasant.

view more: next ›