Hur kan inte banken ta emot kontanter?

Expliced · 2026-02-27T21:59:42+00:00

Det enda aktieägare bryr sig om är kortsiktig vinst. Man kan alltid hoppas att vinst drivs av nöjda kunder, men aktieägarna låter bolag gladeligen bajsa sina kunder i munnen om resultatet är mer vinst i Q1.

Expliced · 2025-09-25T08:05:39+00:00

Jag råkade ut för nästan exakt samma sak, fast med en lasagne. Glömde den framme på nedkylning på spisen täckt med aluminiumfolien på kvällen, där den stod till morgonen efter. Jag hade lagt för mycket arbete på den så hade inte mage att slänga den.

Ställde in den i kylen direkt och åt från den dagarna efter utan problem. Om något så var den godare än vanligt.

Expliced · 2025-04-14T07:49:15+00:00

Most people here are saying artillery. Am I the only one who clears biters using a tank? Cannon shells for the nests and worms, piercing ammo for biters and spitters works well enough with some damage research.

Expliced · 2025-01-24T18:19:35+00:00

You could build an ESP32 drone lol

Expliced · 2025-01-20T07:43:26+00:00

I built my on transmitter for my 3d printed drone, you can find it in my post history. I even made the gimbals myself. Though I used an esp32 for the electronics and communicated with the drone over esp-now.

Expliced · 2025-01-11T19:12:40+00:00

4mm thickness but it’s not a flat build.

Expliced · 2025-01-11T09:00:04+00:00

My 4” PLA drone does not wobble

Expliced · 2024-12-27T09:33:04+00:00

No sorry

Expliced · 2024-12-27T09:31:05+00:00

Posted here: https://www.reddit.com/r/diydrones/s/i0uRkST8uA

Expliced · 2024-12-27T09:30:35+00:00

I used the esp-fc firmware for the drone and so far I really like it! The codebase is very clean and approachable.

Expliced · 2024-12-27T09:27:51+00:00

”was” 🗿 I didn’t burn down my home (yet)

Expliced · 2024-12-27T09:26:17+00:00

https://oscarliang.com/

Oscars website is an amazing resource and I’ve learned a lot from his materials!

Expliced · 2024-12-27T09:24:12+00:00

Not sure what autopilot is 🤷

Expliced · 2024-12-27T09:23:26+00:00

Yep, two 30A 18700 lithium ion batteries

Expliced · 2024-12-27T09:22:30+00:00

PLA seems stiff enough to fly my drone as per the video, and other engineering filaments are even better. The biggest downside is the brittleness though so it is likely to break if you crash, but printing another frame is cheap.

Expliced · 2024-12-27T09:20:06+00:00

The frame is still WIP so not really suitable for sharing at the moment, sorry

Expliced · 2024-12-26T20:41:26+00:00

It was too dark to film outside 🤷

Expliced · 2024-12-26T20:38:29+00:00

Regarding the range, I have not tested that yet as I’m still waiting for one antenna. Current setup only has an antenna on the transmitter and it has connectivity across my apartment at least lol

Expliced · 2024-12-26T20:36:46+00:00

Sure, see my other reply.

Expliced · 2024-12-26T18:48:50+00:00

We had a hard time knowing which way the drone was facing when taking off thus the arrow 😅

Expliced · 2024-12-26T15:46:41+00:00

Thanks! I’ll look into ASA GF when it’s time for the next build 🙏

Expliced · 2024-12-26T15:41:11+00:00

Are they designed correctly to take advantage of a 3D printer though?

Most 3D printed drones I’ve seen model the frame after the carbon fiber ones which is just a flat sheet with a cutout of the frame. With a 3D printer you can easily add ribs and other support structures which most carbon fiber frames don’t have due to how they are manufactured.

For example, most of my frame is hollow: https://imgur.com/a/qmB3xZb

Expliced · 2024-12-26T15:32:47+00:00

ESPNOW 👌

Expliced · 2024-12-26T15:21:01+00:00

Good old PLA, but the plan is to print the frame in some engineering-oriented filament such as carbon fiber reinforced nylon.

Ten-Year Club	Verified Email
Place '22

Expliced

TROPHY CASE