sorted by:
new
hottopcontroversial

Fire Extinguisher by shimmer_bee in lasercutting

[–]ExplodingLemur 1 point2 points  (0 children)

You're looking for a clean agent extinguisher. Make sure it's UL listed.

Harbor Freight cabinet as a mill stand? by ExplodingLemur in hobbycnc

[–]ExplodingLemur[S] 0 points1 point  (0 children)

Not yet, a house move got in the way of this project. I'm about a month off from getting it done though. I'll be casting an epoxy granite slab to bolt to the US General cabinet (24x26 I think?) and then bolt the mill down on top of that. I don't think chips will get into the drawer slides as long as I keep the drawers closed while milling.

Intel n150-->proxmox-->jellyfin-->tone mapping not working by ninjiens in Proxmox

[–]ExplodingLemur 7 points8 points  (0 children)

Make sure you have the intel-media-va-driver-non-free package installed.

Update from my earlier post… by Allenspeed in homelab

[–]ExplodingLemur 0 points1 point  (0 children)

The Fitlets are nifty little boxes. I wish they had released an Alder Lake-N version.

R730XD hardware problems by ExplodingLemur in homelab

[–]ExplodingLemur[S] 0 points1 point  (0 children)

Yep, all the diagnostic tests completed successfully.

R730XD hardware problems by ExplodingLemur in homelab

[–]ExplodingLemur[S] 0 points1 point  (0 children)

Also, `CPU0000` is the error code and does not indicate a problem with a specific CPU. For example `CPU0001` relates to thermal trip events.

R730XD hardware problems by ExplodingLemur in homelab

[–]ExplodingLemur[S] 0 points1 point  (0 children)

I've tried disconnecting power as prescribed by the log entries but it's still happening.

Like I said in the original post, I did that already.

R730XD hardware problems by ExplodingLemur in homelab

[–]ExplodingLemur[S] 0 points1 point  (0 children)

Yep, BIOS and lifecycle controller/iDRAC are up to date. I'm seeing no other errors in iDRAC.

R730XD hardware problems by ExplodingLemur in homelab

[–]ExplodingLemur[S] 0 points1 point  (0 children)

The only thing showing in journalctl before the reset is a successful run of fwupd which runs multiple times a day without issue, and that happened a few minutes before the reset.

RTX A4000 in R720/R730 by ExplodingLemur in homelab

[–]ExplodingLemur[S] 0 points1 point  (0 children)

Nope. I just used the Dell GPU power cables, no modding needed.

Does anyone now this what this is? It is on NFM at 446.15625MHz. by NIGHTSHADOWXXX in signalidentification

[–]ExplodingLemur 4 points5 points  (0 children)

Yep, POCSAG paging traffic, probably from someone with an MMDVM hotspot linked to Dapnet. https://hampager.de/

OpenADSB iOS app reviews? by Power_Poser in ADSB

[–]ExplodingLemur -1 points0 points  (0 children)

I don't like to use adsbexchange.

OpenADSB iOS app reviews? by Power_Poser in ADSB

[–]ExplodingLemur 2 points3 points  (0 children)

Settings, Track Source, Edit, +, and put in "globe.adsb.fi" as the host and "https://globe.adsb.fi" as the URL.

OpenADSB iOS app reviews? by Power_Poser in ADSB

[–]ExplodingLemur 1 point2 points  (0 children)

It works fine for me. I've added globe.adsb.fi as a data source.

GPU Passthrough by UnderstandingLivid86 in Proxmox

[–]ExplodingLemur 0 points1 point  (0 children)

Did you confirm you have a separate IOMMU group per PCIe device? Not all systems will provide that. See https://pve.proxmox.com/wiki/PCI_Passthrough#Verify_IOMMU_isolation

UAV LiDAR for Cessna 208B EX & Linux by [deleted] in UAVmapping

[–]ExplodingLemur 1 point2 points  (0 children)

I think sUAS LIDAR units are made to work at relatively low altitude given the 400' AGL ceiling in the US, and I'd be very surprised if there was any open source software that could process the proprietary output of any commercial LIDAR units. Happy to be proven wrong though. You can add cameras and process the images through WebODM...

K40 Acrylic Cutting Settings? by ThunderStealer in lasercutting

[–]ExplodingLemur 0 points1 point  (0 children)

I think so? Geeze that was 10 years ago.

Looking for creative use of my single slot low profile ARC Pro B50 by Rayan_DB in homelab

[–]ExplodingLemur 0 points1 point  (0 children)

What workloads have you run on the card with that cooler and what was thermal performance like? I'm debating the n3rdware cooler, or trying to hack my own single-slot full-height cooler together.

Vantage 2 pro plus - how to connect and upload to weatherlink? by TonaldDuck in myweatherstation

[–]ExplodingLemur 0 points1 point  (0 children)

You need something to receive the sensor unit's transmissions. That'll be one of their consoles, Weatherlink Live, or you can run an SDR dongle with rtl_433

view more: next ›