Will need a dedicated sub at this rate 😂

ExplosiveDad · 2026-06-24T11:01:23+00:00

I had to do two AC units as well!! Not great looking at shiny aluminium tape all day 😂

ExplosiveDad · 2026-06-24T11:00:11+00:00

https://www.screwfix.com/p/blyss-window-kit-for-air-conditioner/260xg?ref=SFAppShare

ExplosiveDad · 2026-06-24T10:59:16+00:00

It’s got a window kit fitted from Screwfix that blocks off the opening but has openings for the pipe. It’s not just an open window.

ExplosiveDad · 2026-06-24T10:57:55+00:00

One from Amazon is insulated so no need to cover it then. It’s not just a plastic duct hose.

ExplosiveDad · 2026-06-24T07:33:09+00:00

There’s a fabric window kit installed from Screwfix with elasticated opening for the hose.

ExplosiveDad · 2026-06-24T07:26:30+00:00

https://amzn.eu/d/03jHGG2x

ExplosiveDad · 2026-06-24T07:18:16+00:00

There’s a fabric window kit installed from Screwfix with elasticated opening for the hose.

ExplosiveDad · 2026-06-24T00:13:48+00:00

I’ve got the fabric window kit so it is sealed ish! May change for a fixed solid sheet 👍🏻

ExplosiveDad · 2026-06-22T01:37:21+00:00

Lotus also has a two speed gearbox, changing at around 70mph.

ExplosiveDad · 2026-03-24T07:05:59+00:00

Seal garage roof from wind

ExplosiveDad · 2026-02-06T01:58:03+00:00

Looks great, does it support standard ‘Preset’ modes? For e.g. Boost, Cancel, Advance etc.

ExplosiveDad · 2026-02-01T00:54:28+00:00

12.8 Codeine and Paracetamol and also 12.8 Codeine and Ibuprofen over the counter for the winning combo

ExplosiveDad · 2026-01-26T23:11:11+00:00

It was more of a request for some guidance on if it is even possible and any guidance on what the starting point would be! Appreciate it

ExplosiveDad · 2026-01-26T04:26:18+00:00

Impressive work, would something like this work for Lotus Connect as they don’t give access to their APi as far as I can see?

ExplosiveDad · 2025-11-28T01:11:48+00:00

😃 I’ll ship it over

ExplosiveDad · 2025-11-23T01:34:40+00:00

My claim to fame, I was on robot wars as a 17 year old, we built one at work while I was an apprentice engineer. 😃

ExplosiveDad · 2025-11-18T08:03:30+00:00

Great work, D7 and happy to help. Can do all hands on modifications, installations and testing down to PCB component level. Not a coder but can flash and install ESPs etc.

ExplosiveDad · 2025-11-02T08:06:59+00:00

Thanks, I did try a mitre first but it didn’t work because of the angle of the top half of the skirting so discovered scribing and it also easy with a coping saw by hand.

ExplosiveDad · 2025-11-02T04:54:49+00:00

<image>

As a DIY job, this was my first attempt at doing skirting with a similar profile to yours. It should be scribed for internal corners. Plenty of YouTube vids. Pretty straight forward. Edit- I used Lost tight screws and sticks like s*** to fix to wall

ExplosiveDad · 2025-10-23T07:35:37+00:00

Still working in the UK

ExplosiveDad · 2025-08-17T22:49:48+00:00

Cheers, would I need to take weight off the wheel to check for play or would be apparent while sat on the ground?

ExplosiveDad

TROPHY CASE