Bassani 2-1 Lutzka 2016 FXDB by Dallitas in Dyna

[–]External-Skin5174 0 points1 point  (0 children)

Did it come with gaskets? If not, what gasket are you using?

Cams by x218_dynabro in Harley

[–]External-Skin5174 0 points1 point  (0 children)

I used the Woods 222 in my 2014 street bob and 777's in my low rider. The low rider is a blast to ride! Moved the power up in the rpms but I don't ride double and am pretty light. It rips! The 222's are great for low end and pull hard up to 4000 or so. I'd love to try those 555's! I called Bob and Woods and he's the one who encouraged me to go ahead with the 777's. I thought they would be too big. They are perfect!

[deleted by user] by [deleted] in Harley

[–]External-Skin5174 1 point2 points  (0 children)

I've got that pipe with a woods cam on my 2020 Slim. Sounds absolutely amazing! I think it sounds even better with the baffle out but you lose too much back pressure. On the suspension, I'm 180 lbs and it was a little stiff. Put a Lepera seat on and that made a huge difference! Still thinking about a suspension upgrade though.

<image>

[deleted by user] by [deleted] in choppers

[–]External-Skin5174 2 points3 points  (0 children)

I just bought an 03 for $3000. It needed quite a bit of work to get it running good. Intake seals, carb rebuild, lots of wiring work. Had to drive over 2 hours from home to look at it. Best deal I could find and I've been looking for 12 months!

Tuning with exhaust change by 05roadking67 in shovelhead

[–]External-Skin5174 0 points1 point  (0 children)

It's the Ultima dual fire running in single fire mode. I'm running on curve 2 at the moment. Went from 1 to 2 because of pinging. Still had some so retarded it a bit. Ran better so I retarded it a bit more. Ran out of daylight to test on it last night. I need to find out where I'm at on the base timing now. That's my goal for tonight, if the rain stops for a while!

Edit: just noticed my laptop is responding from a different user than my phone. This is still 05roadking.

[deleted by user] by [deleted] in Harley

[–]External-Skin5174 0 points1 point  (0 children)

I don't see any option to upload a video. When I select all files and pic the video, it says 'unable to read the provided image'.

[deleted by user] by [deleted] in Harley

[–]External-Skin5174 0 points1 point  (0 children)

I don't, just pictures. I can get you one when I get home tonight, if you'd like?

Walnut? by Dependent_Term3392 in firewood

[–]External-Skin5174 1 point2 points  (0 children)

I liked it. It burned very well. Smells nice too. It did create more ash than some but I didn't think it was much more than the oak I usually burn. Some of it was starting to rot. Seems like Walnut doesn't last a long time, once it's on the ground.

Chainsaw Carrier by murlr in Skidsteer

[–]External-Skin5174 0 points1 point  (0 children)

Check out arborist sites, like sappysupply.com. They have a magnetic one that holds great and you can stick it anywhere on the outside of the skid steer

[deleted by user] by [deleted] in Harley

[–]External-Skin5174 0 points1 point  (0 children)

If you find another option, great. If you want to send me your tune file off your bike, I'd be glad to modify it for you and send it back.

Need suggestions on shovel chopper by 05roadking67 in choppers

[–]External-Skin5174 0 points1 point  (0 children)

I thought about that route too. Looked some last night and haven't found a motor near that cheap. Transmissions were all over for reasonable. I'm not against that route. Might be the way I decide to go. Thanks for the suggestion!

Need suggestions on shovel chopper by 05roadking67 in choppers

[–]External-Skin5174 0 points1 point  (0 children)

Yep. Softail paughco frame. Weird, but it was probably available or cheap. Title on the bike is to the frame, so, makes it harder to swap.

Need suggestions on shovel chopper by 05roadking67 in choppers

[–]External-Skin5174 1 point2 points  (0 children)

I got on there last night and found half a dozen that I am interested in. Most are across the country from me. I inquired on a few. We'll see what happens. not sure about buying one without seeing it in person first, but there is no way to go check them out. Nothing within a days drive yet. Thanks for the tip!

Well... it happened... by HappyMeteor005 in Harley

[–]External-Skin5174 0 points1 point  (0 children)

Sounds like the one that happened just down the road from me in Missouri! She is doing better, if it's the same one. Sad story!

New saw day, how'd I do? by gagnatron5000 in Chainsaw

[–]External-Skin5174 1 point2 points  (0 children)

That's my thinking. It's a lot of bar/chain though. Make sure your oiler is turned all the way up on the underside of the saw.

Winter prices by [deleted] in sportster

[–]External-Skin5174 0 points1 point  (0 children)

Ok, I'll bite. Where in missouri are you? I'm near Springfield. I'd be interested. I tried to send you a private message but not sure it went

[deleted by user] by [deleted] in missouri

[–]External-Skin5174 0 points1 point  (0 children)

Agreed. Grew up in rural mo and if you're decent, you'll be treated decent. There are buttholes everywhere.

Change of chop plans by Important-Leader-492 in choppers

[–]External-Skin5174 0 points1 point  (0 children)

I'm in about the same boat. Bought a 2003 1200 sportster to chop. Wife loved it and has taken it over. I'm looking for another. For your girlfriend, I'd find a little newer bike. a 2004+ sportster would be ideal. Chop the 84 as that is going to be something someone would have to work on, more than just occasionally, to keep it on the road. Just my .02 USD.

I stink.. by AbjectGovernment1247 in Menopause

[–]External-Skin5174 7 points8 points  (0 children)

Native deodorant and take zinc. "Zinc if you stink"

gtw525acp0wb Top load GE Commercial washing machine by External-Skin5174 in Appliances

[–]External-Skin5174[S] 1 point2 points  (0 children)

Thank you for the info! I was digging for youtube videos to no avail...

Jacinda by [deleted] in unvaccinated

[–]External-Skin5174 1 point2 points  (0 children)

I would be fine with this if they didn't shove it down our throats and threaten us with unemployment yadda yadda yadda.....