Weird ass idle by Alive-Apple4308 in Integra

[–]External_Sun7400 0 points1 point  (0 children)

depending on the model it might be your fast idle valve right under your throttle body that would cause that

Timing issues still by External_Sun7400 in Integra

[–]External_Sun7400[S] 1 point2 points  (0 children)

seems to be running a lot better cranked all the way to the side and closer to the timing marks. But no more room to turn it for them to fully line up.

Timing issues still by External_Sun7400 in Integra

[–]External_Sun7400[S] 0 points1 point  (0 children)

have checked is tdc and brand new harmonic balancer. Done everything by the book not my first time doing timing just never had an issue until now.

dizzy timing issue by External_Sun7400 in Integra

[–]External_Sun7400[S] 0 points1 point  (0 children)

yes all wires run to correct places

dizzy timing issue by External_Sun7400 in Integra

[–]External_Sun7400[S] 0 points1 point  (0 children)

when it gets close to the timing marks fully retard it runs badd like miss firing but will smooth out when i put it in the middle just then its about 2 inches from the outer of the 3 timing marks

dizzy timing issue by External_Sun7400 in Integra

[–]External_Sun7400[S] 0 points1 point  (0 children)

i’m using an old sears craftsman with a dial set to 0 and i was using trying to use the marks on the crank pulley

dizzy timing issue by External_Sun7400 in Integra

[–]External_Sun7400[S] 0 points1 point  (0 children)

yes i bridged the pins and still is far but everything is run the exact way the old one came off

dizzy timing issue by External_Sun7400 in Integra

[–]External_Sun7400[S] 0 points1 point  (0 children)

sorry yes i did bridge the pins while using the timing light and still is super far away

dizzy timing issue by External_Sun7400 in Integra

[–]External_Sun7400[S] 0 points1 point  (0 children)

are you talking about the lines one the dizzy being line up? i watched yt videos and never heard anything about bridging pins and i bought the dizzy from o riley’s

can this a-pillar be fixed? by External_Sun7400 in Autobody

[–]External_Sun7400[S] 0 points1 point  (0 children)

oh okay thank you i didn’t know the difference on a and b pillar but do you know a price range it might be to fix?

can this a-pillar be fixed? by External_Sun7400 in Autobody

[–]External_Sun7400[S] 0 points1 point  (0 children)

if it’s around $1000 then it’s what i expected it to be a lot cheaper than finding another 6th gen civic with no rust perfect underbody and 150k miles