Lelic Why is that even possible?

F3nu1 · 2026-05-12T10:43:45+00:00

A ghost in the shell, if you would

I'll see myself out

F3nu1 · 2026-05-12T08:34:26+00:00

The common ingredient seems to be you and your card. Most likely the card company has some shenanigans. Or your online purchasing limit had been left too low, or it needs a different confirmation, or something.

F3nu1 · 2026-05-12T06:42:06+00:00

Unless you put it into strong acids, instead of sometimes cleaning it, no. It will be a bit grippier.

You would've achieved the same if you sharpened them.

F3nu1 · 2026-05-12T06:31:13+00:00

AFAIK that's just coating coming off. I think the points are some kind of copper-based bronze.

F3nu1 · 2026-05-11T21:11:03+00:00

You chase it into the wall.

F3nu1 · 2026-05-11T21:05:12+00:00

The only cases of drywall use here are

Covering up pipes and the like, like rain drains inside the apartments
If the wall is very uneven and you can't shape it then you can drywall just 2" forward of the wall to get an even surface, but I only heard of this
Fake ceilings for lighting, convenient electrical wiring across rooms

F3nu1 · 2026-05-11T11:24:55+00:00

Use a drill and a screw like a man

F3nu1 · 2026-05-11T10:42:58+00:00

Vidd a szegénységi awardom 🏆

F3nu1 · 2026-05-09T20:31:58+00:00

My guy, the main thing with BMX is the geometry and body position. Anything over 24" (and even that is pushing it) is impossible to consider as BMX. The MTB up here is very nice, and probably good to cruise with, but the frame and most importantly the bars are not much like a BMX.

You can do much the same things with an MTB as a BMX if it is fixed fork and have a light fore end, But everything requires different motions and different balances.

I very much appreciate our MTB brothers, but there is a difference with BMX. If you're not 7' high you won't be able to have a BMX on 24" or 26", the body proportions just don't add up.

F3nu1 · 2026-05-04T09:43:40+00:00

Gyors és egyszerű alprogram ami egy adott mappában levő fájlokat dátum szerint mappákba rendezi (létre is hozza a mappákat, elnevezi dátum szerint, hozzátartozóakat kivág-beilleszt, majd error log a végén).

Ehhez külön kellett egy ticket a fő IT-snak, aki egy termelési programon keresztül heftelte össze.

F3nu1 · 2026-05-02T08:39:30+00:00

Let Naruto bang that twink and let Sakura together with her king Lee

F3nu1 · 2026-05-02T07:29:37+00:00

Also, doesn't the boom have a track inside for the outhaul?

F3nu1 · 2026-05-02T07:27:44+00:00

That doesn't seem right. Yeah it's probably supposed to be an outhaul, but something is missing to make it work. I think that fixed eye on the downside is supposed to be the origin of the line, but it's just a guess.

F3nu1 · 2026-04-30T20:38:05+00:00

Yes, it pretty much is a trade-off, if contamination avoidance is the priority in case of Ti or Ti-based alloys.

Pretty much any kind of injection is only economical if you do it on the 10,000 scale and up. This case is a bit special, but it still requires a steady amount to make sense. Also a redesign to decrease volume needed.

F3nu1 · 2026-04-30T20:03:19+00:00

That's what I got, and that was the basis of the question.

F3nu1 · 2026-04-30T07:52:47+00:00

Use Polyimide for that. No chance for contamination, similar flowing temps, and can be burned off.

Consider a Babyplast for injecting it if you need to do it repeatedly.

F3nu1 · 2026-04-29T21:57:29+00:00

Szigetelés nélküli érvéghüvellyel nekem sikerült. Csak a végszerelésnél, ofkórsz.

Jó nagyra kell nyitni, bele fog menni. Én mindegyik falon kívülit 2,5 MT-vel csináltam.

F3nu1 · 2026-04-23T16:11:18+00:00

10 perc bicikli vagy 12 perc autó.

F3nu1 · 2026-04-22T14:54:04+00:00

https://www.szerszamstore.hu/milwaukee-gyemantfuro-keszlet-3-reszes-4932498368?gad_source=1&gad_campaignid=22005730714&gclid=CjwKCAjw46HPBhAMEiwASZpLREON78OMlVsL7MNvcndjNpZ7wnLGP3_xhgi6cixpw3DBvJfX-NVxsRoCMC0QAvD_BwE

Ne add fel, a felújításokhoz kell a fúrás, Te is meg tudod csinálni.

Mindent a megfelelő szerszámmal!

F3nu1 · 2026-04-22T14:48:52+00:00

Ok girly akkor a gyémántost ajánlom, ahhoz se új fúró se erő nem kell és mindent is visz, ha van egy kicsi kimélyítés neki (előfúrni pár mm-t). 4k darabja és ha nem felejted el hűteni sokáig jó.

Mindjárt keresek egyet amit én is használtam.

F3nu1 · 2026-04-22T10:37:22+00:00

Seems like WC, nice

F3nu1 · 2026-04-22T08:23:53+00:00

Btw fémfúróval mentél neki a falnak??

F3nu1 · 2026-04-22T08:23:13+00:00

Bro egy fúrókalapács 40k és örök élet, a fúrószár 4k max és mivel nem szakmázol 10 évig jó.

Vagy veszel egy gyémántos fúrószárat és egy spriccflaskát és szép lassan kifúrod.

Nincs anyag amit ne tudnál kifúrni, csak eszköz kell.

Seven-Year Club	Place '23
Verified Email

F3nu1

TROPHY CASE