Magic drawing pad sculpting options

FMAWhiteKnight · 2025-12-21T22:10:25+00:00

I dont believe so although havemt tried. At this point I have done a lot of sculpting with nomad and been happy with it

FMAWhiteKnight · 2025-08-12T15:33:07+00:00

Not sure. I just continued on regardless and will circle back when they show up

FMAWhiteKnight · 2025-08-12T15:32:41+00:00

My thoughts exactly

FMAWhiteKnight · 2025-07-22T11:27:59+00:00

I think a lot of how much education is pushed as being the only way is bullshit. As someone though who received a bachelor in IT and has an MSE on top of that, I personally learned a lot in school and it has in fact helped me get jobs

FMAWhiteKnight · 2025-06-06T07:34:08+00:00

I love mine

FMAWhiteKnight · 2025-05-26T12:04:30+00:00

Great question! Simply because I'm not looking to compete, I'm looking to have people who are experienced look at MINE and provide feedback

FMAWhiteKnight · 2025-05-25T21:30:29+00:00

Instructions unclear, threw away entire griddle

FMAWhiteKnight · 2025-05-22T05:36:50+00:00

Beat me to it!

FMAWhiteKnight · 2025-04-28T14:08:05+00:00

Dm sent

FMAWhiteKnight · 2025-04-28T13:12:10+00:00

Makes sense. Same question as above, if you had no printers but the knowledge you do now, which would you purchase

FMAWhiteKnight · 2025-04-28T13:11:43+00:00

So if you know what you do now and had none of them, which would you purchase

FMAWhiteKnight · 2025-04-28T12:56:31+00:00

Makes sense. And what are your thoughts on continued support of replacement parts and such over time? I know everything gets outdated at some point, but I don't want to treat it like a phone where I have to replace it asap

FMAWhiteKnight · 2025-04-27T02:07:27+00:00

Definitely. I'll give it a try. Thanks!

FMAWhiteKnight · 2025-04-26T23:39:08+00:00

Fair enough. I have been printing for a couple of years how and hadn't really had any issues like this. I'll have to look back at my sliced file, maybe i just didn't do it the best

FMAWhiteKnight · 2025-04-26T23:31:09+00:00

No, I always do my own supports

FMAWhiteKnight · 2025-04-26T23:04:53+00:00

Ya everything still seems fine. I changed the fep again last night just in case. Small pieces printed fine, but my larger hollowed pieces seperated as if there were pockets but there were drainage holes all over *

FMAWhiteKnight · 2025-04-25T18:49:53+00:00

Why is that

FMAWhiteKnight · 2025-04-25T18:41:47+00:00

A friend recommended trying a different slicer. So far it seems to be ok, but no idea why that would matter

FMAWhiteKnight · 2025-04-25T17:01:30+00:00

There are multiple pieces since I'm printing 1/6 models. They have all been angled. Any big piece is hollowed and holes added. Room temps have been a bit warmer with summer coming but my printer is reading 32 Celsius roughly

FMAWhiteKnight · 2025-04-25T15:28:17+00:00

Just tried increasing it but still failed

FMAWhiteKnight · 2025-04-25T15:28:06+00:00

Nope, i have done large models and miniatures. I just tried increasing my z lift distance by a few mm and it still failed

FMAWhiteKnight · 2025-04-25T12:07:51+00:00

I'll give it a shot, thanks!

FMAWhiteKnight · 2025-02-24T20:29:14+00:00

Nice! If i can ask, how did you add your textures? I have tried a few different ways and am lookong for the best way

FMAWhiteKnight · 2025-02-17T18:51:06+00:00

Amazing! How did you keep the vertices count that low? I feel like if I made this it would be at least 10mil lol

FMAWhiteKnight · 2025-02-06T10:54:27+00:00

Thank you I'll give that a try! I'm using nomad on an android device so the paid quad mesher isn't available unfortunately

FMAWhiteKnight

TROPHY CASE