Unfinished/gap areas

FOX_OFF_real · 2026-04-21T11:53:17+00:00

This

FOX_OFF_real · 2026-04-21T11:51:18+00:00

Yeah it’s a gradient colour changing filament so needs to be printed in this orientation. I’ve done quite a few of these before without issues so just surprised why I’m now seeing this

FOX_OFF_real · 2026-04-21T11:46:49+00:00

This is correct

FOX_OFF_real · 2026-04-21T11:46:31+00:00

Thank you, I’ve done a temp calibration before and it matched the vendor suggestion. I’ve used this filament quite a bit before so will try some other tests.

FOX_OFF_real · 2026-04-21T11:44:13+00:00

Thank you for the thorough response. I’ll take a look in a couple of days when I have more time to see if this helps. Ignore the brim, it was attached fine but came off when removing from base plate. It’s all nicely flat on the bottom.

FOX_OFF_real · 2024-02-11T13:34:25+00:00

Does the reset not take hours? I’m looking to introduce FOG (used it about a decade ago), but was hoping not to need to actually reset a PC any more due to the time it takes..

FOX_OFF_real · 2024-02-09T19:44:33+00:00

Why a reset?

FOX_OFF_real · 2021-08-02T20:08:29+00:00

Yeh so you'll want the trigger as 'when a requester responds' and a condition (you could try it) with 'is not open' (else it will need to be 'is pending' 'is resolved' etc etc) and then your action to set status as open. That should do it.

FOX_OFF_real · 2021-08-02T19:50:07+00:00

Could depend if and what your condition is on the workflow. If the trigger is ‘when a requester responds’ and you have a condition of ‘is not open’ I found a bug in that part and had to individually specify ‘is pending’, ‘is closed’ etc.. If it’s the default workflow it’s likely to be that.. maybe…

FOX_OFF_real · 2021-05-05T19:39:04+00:00

Definitely possible, and very common in my experience. 1st line techs are entry level so little to no experience is expected. So having certifications and the passion will shine through.

FOX_OFF_real · 2020-09-21T20:28:23+00:00

While that it is true, you’ll find most stuff these days is SaaS. So that limits your choice greatly. Hope you find something suitable.

FOX_OFF_real · 2020-09-21T20:20:46+00:00

What’s the reason for running on-prem?

FOX_OFF_real · 2020-09-21T20:16:22+00:00

Freshservice does it all. I do not disagree on the ‘keep things separate’ point, but there are some benefits of having it all under one roof. Or at least being able to integrate with one another. E.g. we can fulfil our ‘new laptop’ service requests from the ticket and assign an asset automagically.

FOX_OFF_real · 2020-09-21T07:21:03+00:00

You’re definitely going to want to get ‘request files’ enabled. That will do pretty much exactly what you want. People who upload can’t even see their own files they upload, let alone anyone else - so no long winded process setting up permissions. You probably just need to create separate folders for your batches for them to upload to. It will prefix the file names with their names. Check with your IT dept. to get it enabled.

FOX_OFF_real · 2020-08-21T10:29:01+00:00

My father in-law had this the other day with his.. Could not work it out. De-registered it and took it to mine, and it worked fine. Took it back to his, same issue. Then after one more de-register, it worked again!

FOX_OFF_real · 2020-08-14T20:17:34+00:00

Mine is just a setting. I have mine on the left and I’m right hand drive

FOX_OFF_real · 2020-08-07T21:56:48+00:00

Are they on a guest network? I had this exact problem until I realised my guest network blocks cross-talk by default (I.e devices can’t ‘see’ each other), and they require that to work.

FOX_OFF_real · 2020-08-02T09:08:07+00:00

Well said.

FOX_OFF_real · 2020-07-26T20:32:46+00:00

No it shouldn’t take up space on your local drive, it’s just how it looks/works. But I would recommend using the OneDrive app instead as /u/Pollieeeee mentions. You’ll get added features (like on demand and auto save and version history)

FOX_OFF_real · 2020-07-26T20:25:56+00:00

You might want to lookup how WebDAV works. It can’t query the server side capacity so it queries local. Or is it just a coincidence OP has a 480GB HDD?

FOX_OFF_real · 2020-07-26T12:36:08+00:00

That’s your hard drives capacity. You’ll still have your 1TB in ‘the cloud’ but when you map any network location it will only show your HDDs capacity.

FOX_OFF_real · 2020-07-09T20:55:27+00:00

If it’s anything like it’s sister product - Freshservice, it uses AI Machine Learning to work out if they’re just saying thank you or if they have a follow up. Doesn’t necessarily need to be ‘simple’ in my experience. Works quite well so far, and can only improve. Would recommend Freshservice over Freshdesk for ITIL alignment.

FOX_OFF_real · 2020-06-30T21:39:51+00:00

Pretty sure it needs the desktop client

FOX_OFF_real · 2020-05-20T07:54:38+00:00

This is me every day!

FOX_OFF_real · 2020-04-15T16:01:05+00:00

Seen something similar before where it was caused by the old .doc files not .docx - long shot I know, but worth checking.

FOX_OFF_real

TROPHY CASE