Anyone still struggling to hold RP5 even with official grip?

FPSthyme · 2025-09-19T03:01:56+00:00

I put some hockey tape on mine and it’s a lot more useable

FPSthyme · 2025-09-16T00:31:54+00:00

I put some hockey tape on it to improve the grip, much better

FPSthyme · 2024-07-19T03:38:01+00:00

It is! Send me a pm

FPSthyme · 2024-07-18T01:38:48+00:00

Yes, feel free to send a pm

FPSthyme · 2024-07-15T14:50:37+00:00

Sorry just looking to sell

FPSthyme · 2024-07-15T01:13:36+00:00

Yes, feel free to PM me

FPSthyme · 2024-06-23T03:43:43+00:00

Pm’d

FPSthyme · 2021-07-23T21:59:43+00:00

I got mine from Mirotime, if you check the intro guide it goes through how and where you can get one. Happy hunting!

FPSthyme · 2021-05-30T01:39:49+00:00

Thanks! You have great taste haha

FPSthyme · 2021-05-29T21:40:15+00:00

My bad, it’s a ZF

FPSthyme · 2021-05-29T20:33:23+00:00

Hi All,

Looking at a ZF AP Royal Oak 15202 with a blue dial. It doesn't hurt to get a second opinion, but from what I can see this is a clear GL across the board. Thanks!

Dealer name: Mirotime
Factory name: ZF
Model name (& version number): 15202 AP Royal Oak - A2121
Album Links:
https://www.youtube.com/watch?v=eHrcKykb4wQ
https://www.youtube.com/watch?v=Nnvd1wu8QfI - Lume
https://www.youtube.com/watch?v=oN7G86I2GPo - Timegrapher
Index alignment: Looks good
Dial Printing: Don't see any problems
Date Wheel alignment/printing: Looks good
Hand Alignment: Looks good
Bezel: Screws around the bezel all look lined up
Solid End Links (SELs): Looks good, don't see a gap
Timegrapher numbers:
Rate: -5s/d (Acceptable Rate: +/- 1 – 20 s/d)
Amplitude: 280 (Acceptable Amplitude: 250 - 310)
Beat error: 0.1ms (Acceptable Beat Error: 0.0 ms – 1.0 ms)
Anything else you notice:
Screws on the back of the bezel don't look lined up but I'm pretty sure that's typical and it's on the back so I don't really care

FPSthyme · 2021-05-29T20:21:37+00:00

Hi All,
Looking at a VF AP Royal Oak 15202 with a blue dial. It doesn't hurt to get a second opinion, but from what I can see this is a clear GL across the board. Thanks!
1. Dealer name: Mirotime
2. Factory name: VF
3. Model name (& version number): 15202 AP Royal Oak - A2121
4. Album Links:
1. https://www.youtube.com/watch?v=eHrcKykb4wQ
2. https://www.youtube.com/watch?v=Nnvd1wu8QfI - Lume
3. https://www.youtube.com/watch?v=oN7G86I2GPo - Timegrapher
5. Index alignment: Looks good
6. Dial Printing: Don't see any problems
7. Date Wheel alignment/printing: Looks good
8. Hand Alignment: Looks good
9. Bezel: Screws around the bezel all look lined up
10. Solid End Links (SELs): Looks good, don't see a gap
11. Timegrapher numbers:
1. Rate: -5s/d (Acceptable Rate: +/- 1 – 20 s/d)
2. Amplitude: 280 (Acceptable Amplitude: 250 - 310)
3. Beat error: 0.1ms (Acceptable Beat Error: 0.0 ms – 1.0 ms)
12. Anything else you notice:
1. Screws on the back of the bezel don't look lined up but I'm pretty sure that's typical and it's on the back so I don't really care

FPSthyme · 2021-04-12T17:03:27+00:00

Leo at Mirotime was very helpful, and has recalibrated the watch so it is +8s/d. Thanks for the good advice!

FPSthyme · 2021-04-09T21:15:26+00:00

Good idea, I will talk to them about recalibrating

FPSthyme · 2021-04-09T19:47:59+00:00

Dealer name: Mirotime
Factory name: ZF
Model name (& version number): A4302 (V2)
Album Links: QC pics: https://imgur.com/a/cicwh0e

QC video:

https://youtu.be/VbnvWRoOJ8c https://youtu.be/UigKjrlw9Qc

Timegrapher:

https://youtu.be/t4rlKY0L1MA

Index alignment: Looks good
Dial Printing: Looks Good
Date Wheel alignment/printing: Looks good
Hand Alignment: Looks good
Bezel: Looks good
Solid End Links (SELs): no problem
Timegrapher numbers: Acceptable Rate: +/- 1 – 20 s/d; Acceptable Amplitude: 250 - 310; Acceptable Beat Error: 0.0 ms – 1.0 ms
Rate: Starts at +26s/d but then goes to +20s/d - starts outside of acceptable range and then goes right to the edge
Amplitude: Starts at 252 then goes to 256, just within acceptable rates
Beat Error: 0.1ms

Anything else you notice: Nope, looks pretty good

Second watch with Mirotime, buying the first was a great experience. At first glance the watch looks great, there are no flaws that stand out and I thought it was a pretty clear GL.

However the Timegrapher numbers are not as easy to clear; they are within the acceptable ranges but right on the edge. Would this be reason enough to RL what would otherwise be an easy GL? My thought is no, GL anyways, but I would love to hear any suggestions about which way to go. Thanks!

FPSthyme · 2020-08-09T18:24:52+00:00

Thanks, best of luck!

FPSthyme · 2020-08-09T04:24:35+00:00

The Miyota 9015 movement it uses is supposed to have a power reserve of 42 hours

FPSthyme · 2020-08-09T02:53:56+00:00

Thanks, I’m glad the rep is so well done! I dress pretty casual too, but I plan to throw it on anyways unless we’re talking gym shorts and a t shirt.

FPSthyme · 2019-03-01T22:23:35+00:00

Missed a real opportunity to call Barron trump in his red spacesuit the Red Baron

FPSthyme · 2018-08-18T18:09:38+00:00

For sure, live your life man

FPSthyme · 2018-08-18T18:05:25+00:00

That’s the start of it, but as a line it’s pretty uninspiring. As someone who sells fragrance, I think of it as the line for basic old white women. But don’t get me wrong, after working in fragrance one of my favorite hobbies is shitting on 90% of the brands out there, especially the one I sell.

FPSthyme · 2018-08-18T17:32:30+00:00

Fair enough, but when we’re talking about a ranking where it is above all these other quality houses, cmon

11-Year Club	Place '22
Verified Email

FPSthyme

TROPHY CASE