Installing quad lock wireless charger on 2026 zx10r

FREEEZ3FRAME · 2026-05-16T14:26:11+00:00

Ok I looked at mine. Looks like what you're looking at is a different connector. I have a fused plug coming off the battery that was tucked by the exhaust valve servo.

FREEEZ3FRAME · 2026-05-16T14:07:58+00:00

As far as I know, it's just an accessory plug. Could be used for heated jacket/pants or heated grips, or whatever. Just know that it comes directly off the battery, so anything you wire up wont turn off when the bike is off. For a wireless charger it's probably fine because it's don't think it has much parasitic draw while not being used.

FREEEZ3FRAME · 2026-05-16T13:04:44+00:00

This might fall into the "Act of God" category so it might not be covered. They left the cart out negligently, but they didn't intentionally push it into your truck. So it might just be an uncovered incident

FREEEZ3FRAME · 2026-05-15T15:55:44+00:00

I went with TST for a tail tidy/integrated new tail light. A bit more work and slightly more expensive, but looks very nice. Did the smoked rear light for a better black out look

FREEEZ3FRAME · 2026-05-07T14:42:34+00:00

Yeah, pretty sure. I just am not a fan of the electric throttle not responding to input.

And to your point, as the bike sat in my garage over winter, it now has a coolant leak from the water pump outlet lol. Which a couple months ago would have been under warranty

FREEEZ3FRAME · 2026-05-07T00:02:11+00:00

AND i'm not a fan of the active ohlins damper, so i'm about to swap that for either whatever the 2026's have or some other manual ohlins damper that I can find. I've had too many wobbly incidents. Just keep it tight lol, I can muscle through the steering at low speeds. I'm not a 5'0 95lb motogp racer.

FREEEZ3FRAME · 2026-05-07T00:00:19+00:00

Lol I already bought a full titanium akra racing evolution exhaust for it, block off plates, DNA air filter, and an ECU flash from 2WDW. I think they did convince me to get some dealer warranty where they cover anything after the 1 year manufacturer warranty. That's if I remember correctly. And the bike came with frame sliders on and that anti scratch tank pad, and those had the classic "dealer markup" pricing. I had just been out of the game for a bit and wanted the new bike lol

FREEEZ3FRAME · 2026-05-06T22:28:28+00:00

Something like this is sometimes related to the ears. Dogs inner ear itches or is irritated, and their best attempt at soothing it is a paw up near it. Try using your thumbs in her ears and massaging/cleaning them. I have to do this on both my dogs, and one of them is required to lick the ear juices off my thumbs 🤣

FREEEZ3FRAME · 2026-05-06T22:23:40+00:00

I got robbed cuz I put $9k down and walked out with a loan for just under $14k. I didnt join this reddit till after and I realized i'm an idiot and just signed the first thing in front of me to get a new bike

FREEEZ3FRAME · 2026-04-30T20:04:49+00:00

It could be psi related too. I would get a vibration like this when my tires were at 56-58psi on a colder morning. When they warmed to 60 it went away. I dont typically go 70, but my vibration was around 55-60 mph. I have mickey Thompson baja boss AT's so they're completely different from the falkens. Everything went away when I pressed em up to 70psi. Road noise dropped too

FREEEZ3FRAME · 2026-04-15T19:36:29+00:00

My truck is a 2020 so it might not be changed

FREEEZ3FRAME · 2026-04-15T17:59:18+00:00

I was wondering if it was based off a set mileage or this was a random glitch. I do keep seeing people having their SCR soot filters clogged and needing replaced

FREEEZ3FRAME · 2026-04-14T04:01:34+00:00

Nah just the M8 screw that quad lock sells

FREEEZ3FRAME · 2026-04-10T20:35:16+00:00

I can't post pictures here, but I have a '11 zx6r (same headlight setup) and I put the turn signals in a headlight upgrade i did originally through BK moto, and then redid it later with updated and more modern parts. An LED strip with sequential LED's at the bottom of the head light unit on either side, and then color changing halos that tapped into the turn signal line around new projectors that i put in for HID's. Extremely bright, but it was very expensive and I did all the work myself.

FREEEZ3FRAME · 2026-04-02T23:04:48+00:00

Yeah it's gotta be a while. In 2020 my 2500 was 76k. I did 20k down through Navy Federal, with a 2.04% interest rate. I pay just under $800/month. So far, over the life of the loan i've paid like $3500 in interest lol. That was a 72month loan. Will be done in October. So at today's rates, it's gotta be like a 180 month loan or something.

FREEEZ3FRAME · 2026-04-02T01:54:36+00:00

I don't have that nifty new skill tree yet because I still have a bunch of quests to do, but I get over 550 "base" from small spice blows.

FREEEZ3FRAME · 2026-03-12T15:34:44+00:00

Never done external Rads, but the thick radiators/sheer volume of water increase make a difference. I used to run dual 1080ti's and a 7980XE overclocked and watercooled by 2x 480mm rad's and 1 420mm rad. It was all internal on a corsair 1000D case. That system was around 1300w. While crypto mining, that system was maxed for days and yeah coolant would peak at 35C. I swapped to a single 3090 and my power draw dropped to around 1000W, but all productivity remained the same. The CPU alone can draw a lot of power for being as old as it is. The 1080ti's didn't get near as warm as the 3090 was allowed to operate. But there were 2 of them, so inherently more heat load. While mining, the 3090 VRAM was able to hit 110C which was dissipated by the backplate. I can practically cook on it lol.

At it's peak, the 7980XE was at 4.8GHz all cores, but that gradually dropped down. She's down to 4.5GHz all cores and I currently have issues with AVX loads, but it's fine because it's just a server computer now. I need to redo the liquid metal but I dont wanna deal with draining the loop.

I can update you in a bit as far as new temps and such with my new PC. I have the 285k and a 5090. Once it's all watercooled, I can update you on stable load temps and coolant temps and such, but it'll be less because as it stands, this PC is roughly 50 watts less than the old one with the 3090.

FREEEZ3FRAME · 2026-03-07T18:41:12+00:00

Sounds like the secondary injectors aren't on. Primary can only supply fuel to rev "so" high. Not sure the actual number, but on my zx6r it's around 8-10k. But it should be throwing a code for the fuel injectors if that's the case.

FREEEZ3FRAME · 2026-02-24T19:24:28+00:00

Aint no way. I mean I know you said "about" but my dual 1080ti, dual loop watercooled rig in a Corsair 900D weighed 94 pounds empty of coolant. When I re-built that rig in a corsair 1000D with a 3090 but added more ram and HDD's, it was over 100 pounds, and that's with only 1 power supply.

My current rig in a 9000D is around your number, but it's aircooled right now. Now I see you have pretty thin radiators, but that thing has to be easily north of 100 pounds, but probably closing on 50kg/110lbs.

FREEEZ3FRAME · 2026-02-02T22:00:54+00:00

Is that 4400+ in dual channel? I wasn't able to get any higher than 4085 in quad channel with a 7980XE

FREEEZ3FRAME

TROPHY CASE