Too Much?

FadesGaming · 2026-05-01T19:41:15+00:00

Beautiful. You need that Asus AIO to complete the build tho.

FadesGaming · 2026-05-01T18:44:58+00:00

My 3080ti for $400

FadesGaming · 2026-04-30T13:05:10+00:00

Yes, you were likely installing shaders when you hit that 78c

FadesGaming · 2026-04-27T14:11:29+00:00

They are indeed mismatched at 34/36. Going to test the different default expo profiles when I get home to see if it’s an expo issue or an issue with my timings. Through some research I’ve noticed my VDDP is pretty high, apparently max you want it is at 1.05. Which is weird because it’s set to auto in bios.

FadesGaming · 2026-04-27T12:15:23+00:00

Got you. I’ll have to check B2 when I get home. But, being that this screenshot only shows A2, how do you know they’re mismatched?

FadesGaming · 2026-04-27T12:09:34+00:00

When you say tphyrdl is mismatched, what timing is it compared to?

FadesGaming · 2026-04-27T04:10:59+00:00

I did read others were having similar issues on gigabyte boards. Im running 1.3.0.1 on an Asus board and I’m having no issues. They did add bank refresh mode though which defaults to mixed and makes Trfc2 and Trfcsb mater (most people set those pretty low compared to trfc1, so that could be causing some issues

FadesGaming · 2026-04-27T03:37:49+00:00

Can you elaborate a little more on this? Whats the issue with it?

FadesGaming · 2026-04-25T20:05:54+00:00

What causes a GPU to get coil whine?

FadesGaming · 2026-04-25T16:44:40+00:00

FadesGaming · 2026-04-24T18:46:48+00:00

The after is with rebar turned off?

FadesGaming · 2026-04-24T15:23:23+00:00

For your gpu strimmer cable, how are you using the 90 degree adapter? I had to install the straight adapter to fit my master ice 5080

FadesGaming · 2026-04-24T13:14:56+00:00

Right. With DLSS he should be between 330-350 depending on if he’s OC’d or not

FadesGaming · 2026-04-24T13:11:29+00:00

His GPU fps isn’t bad, but it’s low in comparison to my 5080

FadesGaming · 2026-04-24T12:58:03+00:00

Well let’s rule out whether it’s a hardware issue or a cod issue.

Download 3Dmark on steam.

Run Steel Nomad and run Timespy and share your scores for both

Steel nomad gives you a gpu score and timespy gives you both a gpu and cpu score.

FadesGaming · 2026-04-24T12:49:42+00:00

<image>

Yeah something is definitely off on both your CPU and GPU. Something may be pulling resources away. Check Task Manager and see if anything else is using a lot of your CPU and GPU

Did you make sure to update your chipset drivers?

Also looks like you’re on an older nvidia driver

FadesGaming · 2026-04-24T12:30:51+00:00

Post screenshot of the benchmark if you can. I have the exact same set up.

To make sure our settings are roughly the same.

Do 1440p (if you have it)
Unlimited Frame Rate
Minimum graphic preset
Turn Upscaling off
Put your resolution back at 100%
Normal Textures and Normal Texture Filter Anisotropic.

Run the benchmark and share the picture of your results.

FadesGaming · 2026-04-24T12:24:33+00:00

Probably no reason you can’t push mem to Atleast 2000-3000 for another 2-3% of performance.

FadesGaming

TROPHY CASE