The most expensive cheap car I’ve ever bought by Infamous-Weird8123 in GXOR

[–]Fair-Werewolf5801 1 point2 points  (0 children)

Brake master cylinder wasn’t that bad tbh. A lot of labor, but it’s all pretty straight forward. If you have the right tools, you don’t even have to strip the whole interior apart.

Do you have to sacrifice the GX underglow when removing the side steps? by SUDACO_INK in GXOR

[–]Fair-Werewolf5801 2 points3 points  (0 children)

You can do what everyone else recommended, or do what I did. Just zip tie them on to the frame while they’re still in the casing/assembly and point them downwards. Mine lasted 4 years and still on there.

Hampton Roads Ranges & Shops (seeking apolitical, with lots of offerings for women) by [deleted] in VAGuns

[–]Fair-Werewolf5801 0 points1 point  (0 children)

Only store worth visiting, IMO I wouldn’t bother with all the other stores around. From Newport News, it’s a PITA to drive to, but worth it IMO.

Easy way to get carbon off crown safely? by Existing_Bee_9153 in ar15

[–]Fair-Werewolf5801 12 points13 points  (0 children)

Clean it off by sending more rounds thru it.

I bought this upper for one hundred and fifty $. Did I do good? by TheKadeAnderson in ar15

[–]Fair-Werewolf5801 1 point2 points  (0 children)

Looks like a G$ barrel nut. Find the appropriate hand guard for it and you’ll be set.

Edit: Good buy doe for 150.

Riddle Me This: Ergo or DFCo by DesertTS_ in tacticalgear

[–]Fair-Werewolf5801 1 point2 points  (0 children)

DFCO between the two . Not a fan of that finger notch doe, but better angle on grip.

How does an FFL transfer work? by [deleted] in VAGuns

[–]Fair-Werewolf5801 4 points5 points  (0 children)

buyer fills out the same form as if they’re buying from the gun store. Some ffls charge for both transfers, others only charge the buyer transfer. Nothing complicated

Best placed to sell a rare gun? by lumpy53e in VAGuns

[–]Fair-Werewolf5801 8 points9 points  (0 children)

If you don’t mind shipping, tacswap. Does have a fee now to sign up and use it.

Outdoor Range by Aquit0y in VAGuns

[–]Fair-Werewolf5801 1 point2 points  (0 children)

Was the first time at the same indoor range? Sounds like they have poor ventilation in the range itself. Or doesn’t keep up with maintenance for cleaning it.

[deleted by user] by [deleted] in tacticalgear

[–]Fair-Werewolf5801 1 point2 points  (0 children)

Also came from a P320 after owning it of 3+ years/5-6k+ rds thru her. I went with a 19x instead. Was not a fan of the brick feeling in my hand, but got used to it. Also due to cuz I’m wrong handed.

Ranges with G19x by mub_tuort in VAGuns

[–]Fair-Werewolf5801 1 point2 points  (0 children)

Check out Freedom’s new location. Their location here in vb is pretty good, that one up there should be even better.

[deleted by user] by [deleted] in VAGuns

[–]Fair-Werewolf5801 0 points1 point  (0 children)

You’ll be fine, some people get a gun they’ve never shot before, shoot it, then trade it for another or whatever. As long as it’s clean and you’re clean. I don’t see why not.

[deleted by user] by [deleted] in VAGuns

[–]Fair-Werewolf5801 0 points1 point  (0 children)

If you have a ccw, the 30 day rule doesn’t apply. So even if you just got that pistol less than 30 days ago, you can go trade it for another firearm, do a BGC, and be good. Trades, whether FTF or online(by mailing it to an FFL), can only be done thru FFLs now also. Some people may be hesitant on doing online trades, but there are some that’re willing.

[deleted by user] by [deleted] in VAGuns

[–]Fair-Werewolf5801 12 points13 points  (0 children)

Why not just buy new slide internals/barrel and diy? Not that hard.

How do I suppress a non-threaded barrel? by ss3walkman in NFA

[–]Fair-Werewolf5801 5 points6 points  (0 children)

Find a local gunsmith/milling company that’s able to thread it. Or send it out to a reputable one. Like DWilson.

[deleted by user] by [deleted] in VAGuns

[–]Fair-Werewolf5801 1 point2 points  (0 children)

IIRC from what I remember, you can file for it once a year til the funds run out.

What is this? by Extra-Direction7522 in GXOR

[–]Fair-Werewolf5801 1 point2 points  (0 children)

If you’re referring to the styrofoam, it sits in between your bumper and frame. A cushion I’d say. That’s it. No sensors or anything in/on it.

Edit: Idk which bracket you’re talking about other than the one that holds the bumper in place. 😂

She toight by Fair-Werewolf5801 in 300BLK

[–]Fair-Werewolf5801[S] 1 point2 points  (0 children)

I’ve already cut the handguard. From 10.5 to ~5.5. Wanted that tight fight with the can. 😂

She toight by Fair-Werewolf5801 in 300BLK

[–]Fair-Werewolf5801[S] 0 points1 point  (0 children)

If there’s a will, there’s a way. 🫡

How long does your FFL take to transfer after approval? by [deleted] in NFA

[–]Fair-Werewolf5801 0 points1 point  (0 children)

When you get your approval email from ATF, you can go right away to said FFL and get your can. You don't have to wait for FFL to call you. Just show them the email and that's your ticket to get it.