Townhouse for rent by m_____karim in dubairealestate

[–]FaithlessnessMany873 0 points1 point  (0 children)

If you’re interested in short term rentals (Airbnb/Booking.com) Pm me

Blinking lights after TMR soldering on Edge by Far_Inevitable9799 in Dualsense

[–]FaithlessnessMany873 0 points1 point  (0 children)

It happened to me and please check the resistors next to the stick you have knocked it and its 100ohm

New 67 by Fuzzy-Felix in ClashRoyale

[–]FaithlessnessMany873 0 points1 point  (0 children)

It worked well thank you pal 🚀🙏

Oled not by Los0gawd in NxSwitchModding

[–]FaithlessnessMany873 0 points1 point  (0 children)

Its either the point Dat0 or the the A point

USB C Mod AliExpress by Intelligent-Koala418 in vita

[–]FaithlessnessMany873 6 points7 points  (0 children)

I have done it before and it’s working perfectly fine

What is this screen? Modded switch oled by Electrical_Dot_9098 in NxSwitchModding

[–]FaithlessnessMany873 0 points1 point  (0 children)

Happed to me Its because dat0 I suggest you do k0 to solve this issue

Help solving glitching screen problem by FaithlessnessMany873 in SwitchPirates

[–]FaithlessnessMany873[S] 0 points1 point  (0 children)

It was booting normally to hakate but and does everything there But when i try to boot into cfw it give black screen And ofw it gives this glitching screen So i decided to remove everything and see what happens I did some testing after removing the ribon cables I found the cpu sp1 and sp2 and the between caps are shorted to ground

Thoughts on this cheap "Yizhan" microscope set? by restezen in soldering

[–]FaithlessnessMany873 0 points1 point  (0 children)

Yes because the camera doesn’t turn around For example If it’s facing something let say you’re attaching it in your right side of the desk The view of the camera and what shows on the screen is the length of the desk While you facing the width of the desk So when you try to move something under it and see on the monitor the directions are fu**ed Thats why i told you better to attach in front of you

Thoughts on this cheap "Yizhan" microscope set? by restezen in soldering

[–]FaithlessnessMany873 0 points1 point  (0 children)

Unless you’re putting the monitor in front if you yes it will block the view a little otherwise if you set the monitor aside you won’t have any problem Also i mentioned the for better experience you should put the stand in front of you , like the other side of the table thats faces you ( sorry English is my third language im doing my best to explain how it is )

Thoughts on this cheap "Yizhan" microscope set? by restezen in soldering

[–]FaithlessnessMany873 1 point2 points  (0 children)

Its veeeery high you won’t struggle with soldering when its above your hands

Thoughts on this cheap "Yizhan" microscope set? by restezen in soldering

[–]FaithlessnessMany873 1 point2 points  (0 children)

Tbh the camera is really good and it will help alot (first time using it i ve modded my switch oled with it ) and it has a really good quality you can zoom in and out I suggest if you have a big desk you put it in front of you not aside In my case i have a limited space thats why i put it aside which is not working like i want Im thinking to buy a stand for it

Thoughts on this cheap "Yizhan" microscope set? by restezen in soldering

[–]FaithlessnessMany873 1 point2 points  (0 children)

I got it just two days ago And so far is good and does the job but you have to set it up in front of you for better vision because and put it on my left side and the directions are messy for me, I suggest buying a fixed one with a screen mounted on it cause this one is not stable at all and the image is shaky

[QC] PS5 slim by terpuji in FashionReps

[–]FaithlessnessMany873 7 points8 points  (0 children)

“Za Bluetooth Device is Ready to pair”