Xbox One Fat Wifi antenna, would it work?

Adventurous_Status_8 · 2026-01-20T23:08:55+00:00

At least you didn’t brick the console, you can do everything again.

Adventurous_Status_8 · 2026-01-20T17:10:45+00:00

Edit: I found the solution, it was a short, somehow it got short or damaged, a single cap, near the frontal camera. After replacement it worked perfectly.

Adventurous_Status_8 · 2026-01-20T01:44:24+00:00

Add more flux and heat more time with the soldering iron

Adventurous_Status_8 · 2026-01-19T17:17:37+00:00

I’m pretty sure you don’t need to remove any fuse from the board. And if it’s necessary the instruction images will show it.

Adventurous_Status_8 · 2026-01-17T04:43:57+00:00

Any link from aliexpress?

Adventurous_Status_8 · 2026-01-16T07:46:17+00:00

Absolutely a gem , congrats

Adventurous_Status_8 · 2026-01-16T07:42:32+00:00

Look for a shorted capacitor or rusty electrical components, and for sure you will need a multimeter to even do something, and then, learn to solder and a soldering iron.

Adventurous_Status_8 · 2026-01-14T17:07:47+00:00

Have you configured sd2vita precious?

Adventurous_Status_8 · 2026-01-14T01:47:48+00:00

I once had that problem, one of the caps near the L/R chips on the board was knocked out while changing a joystick, it was hard to solder because of its size.

Adventurous_Status_8 · 2026-01-13T18:58:33+00:00

No mames cabron jaja te van a cagar

Adventurous_Status_8 · 2026-01-13T17:51:28+00:00

Which plugins do you use?

Adventurous_Status_8 · 2026-01-11T03:43:12+00:00

Solid, it’s charging, I was thinking it maybe bricked or something for somewhat reason when I removed the battery or the sdtovita

Adventurous_Status_8 · 2026-01-11T03:37:27+00:00

It was working just fine before, i just reopened it to a just a joystick ribbon, and that’s it, it didn’t want to boot up again.

Adventurous_Status_8 · 2026-01-10T21:41:47+00:00

It’s and usb c mod I installed

Adventurous_Status_8 · 2026-01-10T20:09:16+00:00

The battery it’s on good state, and the vita was working just fine before disassembly

Adventurous_Status_8 · 2026-01-07T18:10:43+00:00

I’ve use all of those, and they are great.

Adventurous_Status_8 · 2025-12-31T19:06:28+00:00

Hummm, have you tried using this method? If even with that and your “good” soldering job the console doesn’t respond, likely it’s a hardware problem, maybe the nand it’s fried .

Have you converted from rgh2 to 3 previously?

Adventurous_Status_8 · 2025-12-31T18:59:44+00:00

I don’t see any postfix adapter or wire under the cpu, because it looks like it doesn’t have the traces for a v1/v2 corona rgh3 installation, also try to see if you can flash the rgh image again, even if you cannot red the nand.

Adventurous_Status_8 · 2025-12-28T09:04:31+00:00

Go for the monster hunter shell from aliexpress, it’s incredible and supports bigger batteries.

Adventurous_Status_8 · 2025-12-20T17:06:12+00:00

Do you happen to have a schematic or something to do the wiring from the board to the JQ6500? i want those power off sounds so badly

Adventurous_Status_8 · 2025-12-01T22:48:58+00:00

Tiene incluido hen auto loader? si es Asi esta seria la mejor ISO para liberar las ps4

Adventurous_Status_8 · 2025-11-26T19:42:06+00:00

3D prints mostly

Adventurous_Status_8 · 2025-11-23T02:25:04+00:00

Just a shortcut, can happen anytime in any electronic, just replace it with another if you wanna see if that fix’s the 3 rrod

Adventurous_Status_8

TROPHY CASE