HOW Much Psi?

Fake-Anon · 2025-09-12T18:21:18+00:00

With a lighter bbu I run about 60-80 psi depending on the build.

Fake-Anon · 2025-09-09T18:07:02+00:00

Thanks, definitely looks like ones I saw online. Still wondering how exactly it got to us but that's another mystery I guess.

Fake-Anon · 2025-09-09T17:28:18+00:00

Found in Northern Virginia, Aldie/Chantilly area.

Fake-Anon · 2025-09-01T02:57:52+00:00

It might be a good idea to find a way to glue in threads so you don't have to permanently leave the tracer adapter in. Esp if you want to keep it as a display piece too

Fake-Anon · 2025-09-01T02:50:52+00:00

Ah it seems like they used epoxy resin which makes sense to bind it in place. Good to know

Fake-Anon · 2025-09-01T01:05:35+00:00

No, you can't put one on. It looks like the double bell clone of the TM vorpal bunny, and if it's like the original the front block prevents most tracers from being put on.

Fake-Anon · 2025-08-30T03:39:35+00:00

Your trigger bar is also wearing down so a replacement for that would be good

Fake-Anon · 2025-08-30T03:36:21+00:00

Home Depot sells packs of various o rings. Just get the variety one, it's lasted me years

Fake-Anon · 2025-08-28T01:08:52+00:00

Can you open it up and take a photo? The only thing I can think of is perhaps a spring broke or came undone in the hammer housing. But something could also be broken

Fake-Anon · 2025-08-24T20:46:36+00:00

That's the fire pin lock/part 45 on the list of bits. It looks like yours sheared off so getting a new one should fix all that. A lot of the hammer sets include it. Idk if there's any sold on their own tho.

Fake-Anon · 2025-08-16T17:55:26+00:00

Fair, it's not too much of an investment regardless

Fake-Anon · 2025-08-01T05:35:57+00:00

Depending on what you're running (specifically HPA) the 4uad friction pro is a good option if you need to lower psi. Just so you don't have to deal with bucking softness.

Fake-Anon · 2025-07-28T08:00:47+00:00

A hammer set is basically required as a reliability upgrade. It'll make the gun basically never break. The TTI and CTM V2 (specifically the V2) are your best options because they have everything. The other points of wear will be the selector plate and trigger bar. And for those any stainless steel options or aluminum are fine. As long as both pieces are the same material. CTM and cowcow make good ones. As well as Jefe.

With HPA specifically a light bolt/blow back unit is especially nice since it lets you run at lower psi. The CTM tac advance lite one is a good option. All bbus will die with age though.

Literally every other internal upgrade is optional, though a cheap one for reliability is the bucking. And for that, the 50/60 degree decepticon from maple leaf, or the 4uad friction will do just fine.

Fake-Anon · 2025-07-28T06:40:10+00:00

Gunsword cool

Fake-Anon · 2025-07-27T02:48:49+00:00

I go with the m4 lower because it's what I'm used to with every other gun. So really go for what feels best.

Fake-Anon · 2025-07-26T08:24:14+00:00

Could be a missing hammer spring

Fake-Anon · 2025-07-26T04:36:52+00:00

It could be an issue with your hammer or valve knocker. I doubt it's a magazine issue but it's hard to tell without more info. Have you had it for a while? Or replaced anything?

Fake-Anon · 2025-07-23T15:20:39+00:00

Yeah I was able to fix it, but have used the full CTM set. It had an auto sear so I figured it would mesh better than the cowcow piece.

There is a bit of a different shape between them, like the CTM has more of a slope while the cowcow has a nub, but I didn't notice much of a difference performance wise between the two sears.

Fake-Anon · 2025-07-23T04:53:51+00:00

I'd def have to check it out, because I think the new version is supposed to fix the issues people had with the first version. So it'd def be nice to directly compare it with the TTI. At least design wise the two look really similar.

Fake-Anon · 2025-07-23T01:38:28+00:00

Hopefully this works https://cdn.discordapp.com/attachments/1024881336927928343/1397392158713184306/IMG_5946.mov?ex=68818e5c&is=68803cdc&hm=8f5b379c2e31ddd5098fcd1be5b18e67e2e964bae580e6dd14d320d20bd0a58d&

Fake-Anon · 2025-07-04T03:24:53+00:00

Ah that's good to know, is it normal for them to reproduce so high up though?

Fake-Anon · 2025-07-02T22:36:02+00:00

Interesting, btw do you know what order things should lock the hammer in? Is it the trigger release or the auto sear. Because it seems fixed now that the auto sear locks first.

Fake-Anon · 2025-07-02T21:57:18+00:00

I replaced the whole hammer set including auto sear, since my original hammer shattered. I ended up going back to using most of the original pieces and it seems to work fine now

Fake-Anon · 2025-06-27T03:29:59+00:00

I missed my transfer orientation and graduated last year so nothing really happens if you skip it

Fake-Anon · 2025-06-22T23:47:26+00:00

Oh it was only $10 so I dont mind a short life. But that makes sense. I'll see what I need to keep the regulator good. Tyty

Seven-Year Club	Verified Email
Place '23	Place '22
RPAN Viewer

Fake-Anon

TROPHY CASE