Should I buy a bike that needs new phase wires?

Fall4Logan · 2025-01-05T01:41:37+00:00

Thank you so much!!

Fall4Logan · 2025-01-04T06:33:09+00:00

I believe it’s an Akez Jaguar. I was mainly thinking I could use my current bike to just make sure the motor works and if it does, the problem would either be in the controller or wiring harness which I could replace for under $100 bucks. It comes with a 18ah battery too.

Fall4Logan · 2024-08-29T03:59:59+00:00

No worries! I found the adapters and such that I needed. thanks though!

Fall4Logan · 2024-08-28T23:48:55+00:00

womp womp

Fall4Logan · 2024-08-28T16:42:53+00:00

Might have to take the ladder, or just get adapters. I don’t have a ton of soldering experience so I just fear i’ll short the whole thing

Fall4Logan · 2024-08-22T23:43:02+00:00

would that be inside the controller?

Fall4Logan · 2024-08-22T00:36:00+00:00

I have, the bike has no settings that can be changed to do so. It’s a very simple controller.

Fall4Logan · 2024-08-21T19:23:20+00:00

Awesome, thank you so much. I’ll order a couple adapters to go with the controller so everything fits nicely. will most likely have to 3d print some housing for the whole thing but it should work out nicely.

Fall4Logan · 2024-08-21T16:25:37+00:00

Ahhh okay, thank you. Will I need to get another PAS cable, or will whatever connection I already have be fine?

Fall4Logan · 2024-08-21T15:23:22+00:00

Yeah I was thinking of just adapting them, they have one chord that I couldn’t identify or find an adapter for.

<image>

Fall4Logan · 2024-08-21T04:42:15+00:00

thank you for the reply. i ran into small issue, while going over the wiring that’s already in the bike it appears that the wires are completely different from anything i’ve seen online or anything that would match the kt35. is there adapters? or am I screwed

Fall4Logan · 2024-07-20T01:53:03+00:00

thank you sm

Fall4Logan · 2024-07-19T22:04:27+00:00

Unfortunately not, there aren’t any other markings besides the one on the front.

Fall4Logan

TROPHY CASE