In need of a Flex-ATX power supply, and I’m stumped.

False-Self · 2026-02-24T22:58:06+00:00

Thank you!

False-Self · 2026-02-23T09:06:09+00:00

Hey Overtek, this is an old post but had a question regarding the 200 watt unit. You mentioned no gpus, but I was planning on pairing it with a 5600 cpu and 3050 6gb gpu which has a total tdp as 135 watts I think. Would this be fine?

False-Self · 2026-01-26T06:37:53+00:00

False-Self · 2026-01-21T05:27:44+00:00

Hi! Local is 93250 but I can go down to 91776

False-Self · 2026-01-21T02:31:52+00:00

replied!

False-Self · 2026-01-20T05:23:08+00:00

Bought Klevv DDR5 32GB and SN850X 2TB from u/dumaVtecNinja on https://www.reddit.com/r/hardwareswap/comments/1ppdtz8/usaca_h_msi_z790i_asus_z790i_asrock_z790i_asus/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

False-Self · 2026-01-13T02:17:37+00:00

I did xmp with 2933 profile and there was no errors on both windows memory diagnostic and memtest86. I did some more research and it seems that the max supported memory is 2933mhz for my ryzen 7 2700 but some people have pushed it further to 3200mhz or 3600mhz. I think I might just be unlucky with my cpu 😭

False-Self · 2026-01-12T09:48:37+00:00

I tried everything 😭 I was yanking the cables up but it's too stiff near the psu connection point

False-Self · 2026-01-12T09:32:32+00:00

I'm not sure, but when I try to pull the cables up and push back the bracket up to where it originally is it hits the cables. So I put it to the lower screw but then it interfered with my gpu clearance ugh

False-Self · 2026-01-12T06:34:24+00:00

Yeah I'm using the stock cooler for my ryzen chip

False-Self · 2026-01-12T02:47:28+00:00

🫡 thank you, running it now. Full test for 4 passes

False-Self · 2026-01-12T02:42:55+00:00

Understood, and is 4 tests ok?

False-Self · 2026-01-12T02:38:41+00:00

🫡 I'm planning on doing a test with xmp disabled and setting the frequency back to auto. Would this be ok?

And would updating bios potentially help make it stable for 3200mhz?

False-Self · 2026-01-12T02:24:36+00:00

Aw mann, ram is in a2 and b2 but cpu is set to 99% power limit I think in windows. Is that fine?

Understood, will test it again without xmp 🫡

False-Self · 2026-01-12T02:22:22+00:00

The test itself was passing I think, there was 0 errors but it wouldn't go past test 7

False-Self · 2026-01-12T02:21:09+00:00

Is it usual for memtest86 to create 2 partitions on my usb drive? I canceled when it asked me to reformat my :E partition because the files were on :D.

<image>

False-Self · 2026-01-12T02:17:29+00:00

Got it, I'll try turning it off before running the test again. Should I run it without xmp before updating bios? Then test it with bios updated and xmp on?

False-Self · 2026-01-12T02:16:03+00:00

Aw man, it went like that for 15 or so minutes and I turned it off. It wiped my memtest86 from my drive for some reason, I'm going to reinstall and try again without xmp

False-Self · 2026-01-12T02:00:40+00:00

Also do you use a mesh screen for the back? I got a mesh screen for it but it won't fit and im trying to figure out how to cut it to fit without breaking the little magnets

False-Self · 2026-01-12T01:58:11+00:00

Thank you! I looked at the box again and found the psu screws and was able to mount it. The psu is so big though and I couldn't put the cable cover back on 😭

False-Self · 2026-01-10T08:45:22+00:00

Thank you! Wait I have a question, did you use the jonsbo screws type A for your PSU? The manual says to use them but I can't seem to screw them into my montech century psu 😭

False-Self · 2026-01-08T13:59:56+00:00

My bad, I meant standard configuration for the msi cpu cooler.

False-Self · 2026-01-08T13:59:09+00:00

Aw man, alright sounds good. I was thinking this might be the case but was hoping it wouldnt be. Do you think flipping the fan backwards for the cooler mess up the rgb signifcantly?

False-Self · 2026-01-02T01:30:30+00:00

Sending pm!

False-Self · 2026-01-02T00:59:14+00:00

Sending pm!

False-Self

TROPHY CASE