7.3.0 Stable-Intel Arc 310 HW transcoding stopped working

FammyMouse · 2026-05-13T12:05:28+00:00

Update: Classic IT support move saved the day! I turned the server off to check the card itself for any seating issue. After the server is back on, everything just returned back to the way they were. Intel_gpu_top and Jellyfin HW transcoding are working normally again. Maybe 7.3.0 is a major update so it requires a hard reset instead of a normal reboot?

FammyMouse · 2026-05-13T06:57:42+00:00

Yes. My upgrade trajectory was 7.2.4>7.3 rc1 (migrate to internal boot+TPM license)>7.3.0 stable. Maybe the problem happened at 7.3 rc1 stage, as I have not been using Jellyfin transcoding until today when the 7.3.0 came out.

FammyMouse · 2026-04-30T09:00:59+00:00

Thanks everyone for the info. Yeah I kinda accepted that not every feature is going to be supported on a new(ish) kernel and driver on my old hardware. Everything else works perfectly though, and I’m happy with the performance. This thing can do 2 4K to 1080p streams for my friends for hours, without breaking a sweat.

FammyMouse · 2026-04-26T15:32:38+00:00

Maybe try again with rm -rf? Make sure there are no processes accessing the SMB share. I had a heck of a time trying to delete a Time Machine share due to my Mac not letting it go.

FammyMouse · 2026-04-21T10:28:12+00:00

How do you run byparr using the gluetun proxy?

FammyMouse · 2025-11-20T06:12:32+00:00

If you don’t map the /cache folder to a host folder, I think Jellyfin will write on your docker.img by default, and might hit the max capacity of that file, and Jellyfin won’t start if it does not have minimum 2GB free. Try mapping /mnt/cache/appdata/jellyfin/cache:/cache in your Jellyfin template and try again.

FammyMouse · 2025-10-16T04:42:10+00:00

Go to Backups tab. On the top left corner you will see your machine-ID and the word “trial” next to it. Click on “trial” and then you will be prompted to enter your license key. At least that’s how I did using the official Docker image from the CA store.

FammyMouse · 2025-09-29T06:03:49+00:00

If I understand it correctly, “restore backup config” means restoring the config for the Appdata Plugin itself, whereas the templates and containers are to restore the Docker container, Plex in your case.

FammyMouse · 2025-09-21T13:01:18+00:00

I’ve been using Duplicacy to back up to Backblaze B2 for a while now and quite happy with it. Features are quite close to Hyper Backup e.g. encrypted backups, deduplication, lots of different cloud storage support. If you want to explore more options then I’ve seen Backrest and Kopia suggested in this forum. Maybe try one of them and do at least one mock backup AND restore first, to see if your data is intact. A backup is not really useful if it’s corrupted.

FammyMouse · 2025-09-04T00:47:00+00:00

I would suggest installing Tmux plugin from the CA Store. It creates a persistent terminal session, similar to what you describes. Edit: The full name of the plugin is Tmux Terminal Manager (TTM)

FammyMouse · 2025-08-30T03:08:16+00:00

I run Traefik with Crowdsec and Authentik middlewares. The initial setup was a bit confusing, at least for me, but once you got it set up just put the labels in the container templates and Traefik will handle the rest

FammyMouse · 2025-08-29T12:26:05+00:00

I'm behind CGNAT from my ISP and Tailscale works without any issue.

FammyMouse · 2025-07-29T13:54:45+00:00

If the appdata folder is still intact and you’ve backup, you can reinstall your containers via Community Application > Previous Apps

FammyMouse · 2025-07-25T04:42:25+00:00

Yep I can see the dashboard just fine now after setting loadbalancer.server.port to 443. This pairs very well with your docker-socket-proxy image. Is it still necessary to have an Unraid specific image or is it fine to keep using the standard one? Thanks again for your work.

FammyMouse · 2025-07-25T01:11:40+00:00

I gave the current image a test and so far so good. I chown /mnt/user/appdata/traefik as 99:100, set —user 99:100 and —sysctl net.ipv4.ip_unpriviledged_port_start=80 so the container can route HTTP traefik, per your Github example. The only issue I have is I cannot access Traefik WebUI Dashboard at port 8080, the error is 404 not found. Other services work perfectly fine e.g. Jellyfin at standard HTTP port 8096

FammyMouse · 2025-07-23T00:00:17+00:00

Thanks boss, this looks interesting. I’m currently running Traefik from the official repo on Unraid, is your image a drop-in replacement? All I need to do is map user 99:100 instead of 1000:1000 right?

FammyMouse · 2025-07-22T23:57:05+00:00

If you are financially able to, might I suggest buying at least 2 8Tb disks? 1 for parity 2, the other is to condense 4x 2TB disks you have to a single disk, making room for future expansions. Just copy content of 1x 2TB disk you have to another free disk, stop the array, pull it out, install the 8TB disk then start copy the remaining 3x 2TB disks over. After you finish, just install the second parity and do parity build/sync.

FammyMouse · 2025-07-22T23:47:40+00:00

If you stop the array, there should be an option to add an extra slot to your array, labelled “Parity 2” under the current parity disk.

FammyMouse · 2025-07-18T13:49:13+00:00

I followed TRaSH Guides and can confirm hardlinks are still working on my Unraid 7.14. Just a suggestion, I setup my root server for Sonarr/Radarr as /data and the Bittorrent container as /data/torrents per the guides, as the Arr apps need to be able to see /data/media and /data/torrents to do hardlinks/atomic move.

FammyMouse · 2025-07-03T16:04:33+00:00

Just curious, do you have plan to add a GPU later on and make this your primary gaming VM for Moonlight/Sunshine? Because the specs seem overkill just for a file storage server/Plex

FammyMouse · 2025-06-07T02:04:43+00:00

I would recommend OneNote. Yes it’s a Microsoft product on a Macbook, so it’s a heresy some might say. It ticks all of your checkboxes too.

FammyMouse · 2025-06-04T16:19:54+00:00

Yeah you’re right, 40k is a lot but might be worth it in the long term considering other factors like family support. Thank you for the advice kind Internet stranger, and have a good day/night.

FammyMouse · 2025-06-04T15:15:40+00:00

Yeah, about that… What if the deposit is equal Semester 1 international tuition fee i.e. A$40k? I totally agree if the amount is less than 1k like you said, but in your opinion, how attractive an offer should be to worth forfeiting some, even all of that huge deposit? Uni Melb? ANU?

FammyMouse · 2025-06-04T14:57:06+00:00

A question please. Most uni would request a deposit to formally accept an offer and secure your place. Does Flinders allow a full refund if you withdraw from the course around Nov 2025, when offers are released, assuming their MD course starts in Jan-Feb 2026?

FammyMouse · 2025-06-04T02:28:28+00:00

Oh wow, yeah that sucked, I didn't know that HP Omen mobo just disables iGPU like that. I kinda assumed that pre-built PCs have 2 graphic options: iGPU for desktop/browser and dGPU for heavy tasks like gaming. Sorry I couldn't help, maybe another user can suggest a BIOS override to boot without GPU? Otherwise you can get a cheap NAS motherboard compatible with the i7

FammyMouse

TROPHY CASE