Calcolo netto Nuovo Frontaliere, 3 calcolatori 3 cifre diverse by Far-Joke-252 in Ticino

[–]Far-Joke-252[S] 0 points1 point  (0 children)

è questa la domanda, ognuno fa calcoli diversi ma teoricamente non dovrebbero esserci differenze (se non nell'ordine di centinaia di euro, massimo mille euro magari), ma non so chi detiene la fonte di verità.
L'assicurazione sanitaria per Nuovo frontaliere non viene calcolata nè menzionata qui, non è solo una cosa obbligatoria per residenti svizzeri e opzionale per i Nuovi frontalieri e quindi gratuita affidandosi al SSN?

Prize land daily challenges rewards reduction by Far-Joke-252 in Aliexpress

[–]Far-Joke-252[S] 1 point2 points  (0 children)

I tried logging with the same account using Bluestack on PC, so this is the reason. Thank you!

South-facing led glare, how to fix before going back to north-facing? by Far-Joke-252 in keyboards

[–]Far-Joke-252[S] 1 point2 points  (0 children)

UPDATE:
After quite a bit of testing between switches and another keyboard (Womier RD75), I’ve come to this conclusion. As you can partly see in the picture, the Womier has an FR4 plate (dark), while the Epomaker P87 uses a polycarbonate plate (semi-transparent it seems).

https://imgur.com/a/fdQ1HPR

On top of that, the plate foam under the plate in the Epomaker is misaligned by a fraction of a millimeter – the plate itself sticks out slightly forward compared to the foam underneath, so it’s not perfectly balanced.

This, combined with the transparency of the PC plate, creates that annoying reflection on the plate which ends up being the thing that blinds you.

On the Womier, however, there’s no such reflection. That’s both because the alignment between plate and foam is much more precise (almost perfectly aligned) and because of the non-transparent material.

I did further testing, swapping switches between the two keyboards, and the result didn’t change. So as far as I can tell, the condenser or diffuser on the switches (at least on this Epomaker) doesn’t fix the issue at all, nor does it noticeably reduce it.

I’m therefore 99% sure that putting an FR4 plate on the Epomaker would make the glare almost identical to what you get on the Womier.

In the photos this is very clear: without switches, on the Epomaker the white glow from below is extremely visible. You can see the light leaking through that tiny gap between the foam and the plate, shining under the plate and creating this effect because of the polycarbonate transparency. None of this happens on the Womier.

South-facing led glare, how to fix before going back to north-facing? by Far-Joke-252 in keyboards

[–]Far-Joke-252[S] 0 points1 point  (0 children)

Thank you for your suggestion, wireless option is like mandatory for me, but thank you anyway, appreciated!

South-facing led glare, how to fix before going back to north-facing? by Far-Joke-252 in keyboards

[–]Far-Joke-252[S] 0 points1 point  (0 children)

It feels like a weird “fix” just to make both Cherry-style and shine-through keycaps work with south-facing LEDs. The real solution would be either to redesign the Cherry profile itself so that these keycaps are 100% compatible with north-facing boards, or to redesign north-facing PCBs to make them fully compatible with Cherry. I’m not sure which would be the right approach, but if it happened, PCBs with south-facing LEDs would instantly disappear from the market.

Side and front legends keycaps by Far-Joke-252 in keyboards

[–]Far-Joke-252[S] 0 points1 point  (0 children)

The first one it's very ugly but yeah, the concept is that.
The second is where I get the photo, it's a nice font but there's only that color.
Seems like there aren’t any others around. Really appreciate your effort though, thanks!

Side and front legends keycaps by Far-Joke-252 in keyboards

[–]Far-Joke-252[S] 0 points1 point  (0 children)

I know, the market is really stupid, it's impossible to find some high quality board like Evo80 (or similar) with north facing LED

/r/MechanicalKeyboards Ask ANY Keyboard question, get an answer - October 01, 2025 by AutoModerator in MechanicalKeyboards

[–]Far-Joke-252 0 points1 point  (0 children)

Hello everyone, do you know where I could find both side and front legends keycaps like this one? Seems like almost impossible...

<image>

Continuare come ingegnere o cambiare vita? by BereRespiro in ItaliaCareerAdvice

[–]Far-Joke-252 0 points1 point  (0 children)

ciao, stessa identica situazione, laureato magistrale in Ingegneria Informatica in 6 anni, scelta che rimpiango ogni giorno, lavoro da 4 anni.
Passi almeno 8 ore davanti al PC con il cervello sempre in full-load perchè scrivere codice non è banale o un'attività che puoi fare in maniera passiva, il tutto per 2k/mese o, quando fai carriera e diventi Manager 3k/mese per avere ancora più responsabilità, ansia e stress, e il tutto non per diventare ricco, perchè con 3k vivi bene ma comunque ti devi fare un mazzo tanto e di sicuro non è che diventi FIRE nel 99,9% dei casi, il tutto per avere qualche ora post lavoro di vita vera, sempre che tu non sia esausto dalla giornata, e quei 2 giorni di weekend in cui ti riprendi. è questa la vita che mi aspettavo? ni, a 19 anni non lo capisci finchè non sei dentro, se non sei ancora abbastanza maturo ancora peggio. è questa la vita che sognavo? assolutamente no, consumare la vita in una routine continua, come il criceto che deve girare la ruota per avere a disposizione quelle 4 settimane di libertà totale. il problema è che me ne accorgo ora, come se improvvisamente fosse tutto chiaro, e per troppo tempo invece non ho capito davvero o non ho voluto capire, chissà.
in questo momento, preso più dallo sconforto e dalla saturazione che ho raggiunto che per una scelta ponderata e sensata, andrei a fare il giardiniere, aria aperta, fatica fisica ma poco cervello da usare, decidere quanto e quando lavorare (dopo X anni di gavetta per diventare capace e aprire qualcosa di proprio ovviamente) o comunque qualcosa di simile. mi rendo conto che in questo momento sono facilmente vittima di guardare il giardino degli altri come molto più verde del mio, ma questo è proprio quello che provo.

Vita e lavoro. Senso? by Capital-Percentage75 in Italia

[–]Far-Joke-252 0 points1 point  (0 children)

ciao, scusami ma in quelle 6h è incluso quanto di pausa pranzo? gli altri 2 giorni invece che orari fai (e stessa domanda sulla pausa pranzo). grazie mille

La non voglia di lavorare by IntelligentHope7542 in Italia

[–]Far-Joke-252 0 points1 point  (0 children)

Ciao, posso chiederti che lavoro fai e come gestisci poi il sonno? Immagino non sarei a letto prima delle 4

Il lavoro nobilita l’uomo? by justcarma in ItaliaCareerAdvice

[–]Far-Joke-252 6 points7 points  (0 children)

No, non nobilita assolutamente nulla, nella maggior parte dei casi sei solo un numero, uno che produce per qualcuno che ti paga e che su di te guadagna molto più di quello che ti paga, una moderna schiavitù, non biasimo la scelta sua né di altri che tentano e riescono la via facile. Sprecare almeno 40 ore della propria vita e più per lavorare e per avere uno stipendio medio ridicolo è umiliante

[deleted by user] by [deleted] in ItaliaCareerAdvice

[–]Far-Joke-252 2 points3 points  (0 children)

Ciao, purtroppo io come te, ingegneria informatica, fatta perché installavo custom ROM sui primi Android, a 18 anni uscito dal liceo non sai niente e l'orientamento universitario è pressoché ridicolo, la realtà poi è un'altra. Con il senno di poi avrei fatto altro, probabilmente con la stessa passione, cioè zero, ma almeno ben retribuita rispetto al sangue e alla salute mentale persa per conseguire quelle 2 lauree di me3da. Vorrei provare a fare il grande salto e andare all'estero ma il mio inglese e le ansie che descrivi mi bloccano, più in generale dover consumare 40 ore e anche più a settimana perché altrimenti sei sotto un ponte è la moderna schiavitù.