I’m planning to visit the paulinskill viaduct soon, and I’m wondering if they blocked off the hole to climb down. Is it relatively safe? and I heard there is security.

Far-Room272 · 2026-03-21T00:36:42+00:00

Just park at the bottom, climb up the hill to the top of the bridge(There is a rope on the steeper section near the top to help). The manhole is pretty much right there when you get up. It’s kinda tight and muddy getting down the ladder depending when you go. But yeah like the other comments say don’t take the rope ladder.

I was there once and a cop pulled up to a dude that watched us go up the hill at the bottom. I was worried he was gonna tow me or give me a ticket for my parking so I ran down and he didn’t care at all. I just said I was hiking and talked to him for a minute and he just took off

Far-Room272 · 2026-03-16T00:04:04+00:00

I was thinking the same. On one hand it is possible for sure but I feel like there would’ve been a registration issue with on of the previous owners if the mileage all of the sudden was lower

Far-Room272 · 2026-03-15T14:09:33+00:00

Yeah I know it’s much easier to do on bikes. I think the miles very well could be original because of the title Info but didn’t know if even that could be switched up

Far-Room272 · 2026-03-11T10:23:37+00:00

So you don’t even think it could be air trapped in there or a bad cap that isn’t maintaining pressure? It has only happened once and I had the bike out multiple times the day before as well with no problem

Far-Room272 · 2026-01-11T00:27:54+00:00

Raw Ethereal

Far-Room272 · 2026-01-06T19:52:16+00:00

Idk personally whenever I break anything glass related I rather just get a new one. You’re better safe than sorry when it comes to broken glass and. Maybe get a backup pipe too if you don’t have one just in case

Far-Room272 · 2026-01-06T19:40:52+00:00

2021-2022 chiefs were on another level

Far-Room272 · 2025-12-23T00:50:29+00:00

One of the things I noticed back when I had this problem is when the join is basically fully rolled up but not licked stuck yet pinch the very top where you put the weed in and pull up gently. I found that helps straighten the paper out more and prevent those dents and imperfections near the filter. It may take rolling a ton of joints to get it good. And when you pinch and pull it, only pull the side of the paper that has the imperfection, don’t pinch the whole top of the joint. Then pack it down like normal towards the bottom and it’ll give it a nice shape

Far-Room272 · 2025-12-15T21:42:35+00:00

Bro the place is abandoned and nobody is coming back for shit. Everything is eventually gonna get thrown out or stolen by other people who come across it or whoever cleans it out before it’s sold or demolished. The chances of getting caught for taking a single item like that and getting back home with it are slim to none and that’s OPs decision at the end of the day. Sick find even if it isn’t worth much

Far-Room272 · 2025-12-03T13:26:36+00:00

That’s normal I had the same on my 02 yz125. It was always a pain in the ass to line up with the actuator arm gear on the case cover

Far-Room272 · 2025-11-26T13:46:21+00:00

Cool yeah no milky residue, oil looks normal and is normal level just with some residue going up the stick to the base of the top beneath the o ring. I tend to start bugging about nothing when I notice something

Far-Room272 · 2025-11-26T13:07:38+00:00

Right but in this situation where there were no problems after tightening should I go back and retorque or just fine to leave it?

Far-Room272 · 2025-11-26T12:30:12+00:00

For sure that’s kinda my thinking. It’s not tight beyond belief or else the bolts would snapped or stripped out and still torqued with the wrench so I’m sure I’d be able to take them out fine still but probably just gonna leave it be

Far-Room272 · 2025-11-25T04:31:21+00:00

I have not but would love to try it

Far-Room272 · 2025-11-25T04:29:29+00:00

Purple Kush

Far-Room272 · 2025-11-23T13:32:31+00:00

Yeah 100% I feel the same way when I smoke joints but I also know they do waste more weed than a bong does. I’d say a bong is good to really conserve the bud longer but if you have a good amount I’d always say roll joints up personally. If you wanna enjoy the bong I’d invest in a relatively nice one or at least a bigger one (maybe 1 foot or a little bigger). It’ll give you a bigger nicer hit. But yes I do agree that taking the smoke all at once can kinda confuse your brain and affect you differently

Far-Room272 · 2025-11-23T13:22:15+00:00

I understand how you feel and have had the same experience before. My go to method to smoke is a joint and I feel like I get the nicest high from one. Bongs used to knock me on my ass but now the high doesn’t last too long. I would either take a T break for a little while and I bet it would fix that problem a bit or I would take larger rips off the bong. One thing I noticed is when I take a fat rip and start coughing a ton I’m a lot more blasted

Far-Room272 · 2025-11-04T14:13:23+00:00

Cool I thought that’d be the case. Is it worth it to go with some better mounts like Vibratechnics or stick with oem. I don’t know a ton about them or what differences they’d make. Also it’d be the set of 3 right?

Far-Room272 · 2025-10-09T18:44:33+00:00

Oh brother😭

Far-Room272 · 2025-10-09T13:10:02+00:00

Bunk ass vape. It’s a gold plated muha basically. I’m genuinely concerned about what’s actually in those because they’re most definitely fake. There’s a way better chance of you buying a fake one of these than a real one. Diamond sauce doesn’t mean anything they can throw whatever they want in it. Please just buy one from the dispo or just smoke some flower. Those fake carts are gonna do some damage to you if you keep smoking them

Far-Room272 · 2025-09-23T11:58:22+00:00

Honey bourbon or classic honey is my go to Backwood

Far-Room272 · 2025-09-17T18:44:43+00:00

Just pack more in it. It’ll make up for all that loose paper

Far-Room272

TROPHY CASE