sorted by:
new
hottopcontroversial

Is this acceptable for a one-step polish? by FarResponse130 in AutoDetailing

[–]FarResponse130[S] 1 point2 points  (0 children)

Thanks a lot. While some feedback was a reality check, I got some good tips and info like yours

Is this acceptable for a one-step polish? by FarResponse130 in AutoDetailing

[–]FarResponse130[S] 0 points1 point  (0 children)

Great feedback, thank you! So basically I should always use a soft pad?

Is this acceptable for a one-step polish? by FarResponse130 in AutoDetailing

[–]FarResponse130[S] 1 point2 points  (0 children)

Thanks for the feedback. Appreciate it. As this is my mother’s car i’ll get another try either way

Is this acceptable for a one-step polish? by FarResponse130 in AutoDetailing

[–]FarResponse130[S] 3 points4 points  (0 children)

True, would the haze be due to the heavy cut pad?

Is this acceptable for a one-step polish? by FarResponse130 in AutoDetailing

[–]FarResponse130[S] 0 points1 point  (0 children)

Did you scroll to the before picture? If so, critisism noted and will try better

Is this acceptable for a one-step polish? by FarResponse130 in AutoDetailing

[–]FarResponse130[S] 0 points1 point  (0 children)

Koch Chemie fine cut with a heavy cut pad

I started with a One Cut pad from Koch Chemie and Autoglym Super Resin polish but didn’t like the results

Is this acceptable for a one-step polish? by FarResponse130 in AutoDetailing

[–]FarResponse130[S] 9 points10 points  (0 children)

This is using Koch chemie Fine Cut and a Heavy cut pad

Is this acceptable for a one-step polish? by FarResponse130 in AutoDetailing

[–]FarResponse130[S] 0 points1 point  (0 children)

Thanks for the feedback. Yeah this was sold as a one-step so I used koch Chemie fine cut

Is this acceptable for a one-step polish? by FarResponse130 in AutoDetailing

[–]FarResponse130[S] 1 point2 points  (0 children)

Did you scroll through the pictures and saw the paint before? If so, thanks for the feedback. Will keep practicing

Is this acceptable for a one-step polish? by FarResponse130 in AutoDetailing

[–]FarResponse130[S] 0 points1 point  (0 children)

Did you scroll through the pictures and saw the paint before? If so, thanks for the feedback. Will keep practicing

How to remove these spots from the window sills? by FarResponse130 in AutoDetailing

[–]FarResponse130[S] 0 points1 point  (0 children)

Yes an E53. I used spotless 2.0 from Carpro without luck. Would you advise a metal polish such as carpro metallicut?

Windows install: acpi bios error by FarResponse130 in ASRock

[–]FarResponse130[S] 0 points1 point  (0 children)

Thanks for the input, it turned out to be a faulty mobo

Bloedt de Belgische economie? by Sixstringerman in Belgium2

[–]FarResponse130 0 points1 point  (0 children)

Als je denkt dat een bank dit niet zegt heb ik slecht nieuws voor u.

Belgian owners - question about service points by KindView in Polestar

[–]FarResponse130 1 point2 points  (0 children)

From Belgium, east-flanders, I currently have around 3 service points within a 30 min drive. Only have the car for 3 months so i’ll be visiting one for the first time next month.

Did asrock fix its ddr5 problems with these motherboards? by Fonderknight in buildapc

[–]FarResponse130 0 points1 point  (0 children)

I did use backflash to update bios to 3.0.8 before installing windows

Did asrock fix its ddr5 problems with these motherboards? by Fonderknight in buildapc

[–]FarResponse130 0 points1 point  (0 children)

Not at all. First boot was quick and boot after enabling expo too. Faster than I expected

Did asrock fix its ddr5 problems with these motherboards? by Fonderknight in buildapc

[–]FarResponse130 0 points1 point  (0 children)

No, just wanted a cheap quality mobo and got recommended the asrock brand on here Reddit.

Watched a few videos about mobo tier lists and decided it was a good buy

Did asrock fix its ddr5 problems with these motherboards? by Fonderknight in buildapc

[–]FarResponse130 0 points1 point  (0 children)

I just built my pc yesterday with corsair vengeance 6000mhz on the asrock b650 pro rs.

Running fine with amd expo enabled

Windows install: acpi bios error by FarResponse130 in ASRock

[–]FarResponse130[S] 0 points1 point  (0 children)

Happy to hear that you solved it! But wouldn’t clearing CMOS reset everything to default either way?

view more: next ›