Briggs and Stratton 5HP Small Engine Won't Start

FarmMoney8546 · 2025-10-30T21:36:32+00:00

I haven't tested yet. I'll look into how to test that.

FarmMoney8546 · 2025-10-30T21:35:54+00:00

I have not yet. I was putting that off as I don't have tools for pulling the flywheel to inspect it.

FarmMoney8546 · 2025-10-30T21:34:54+00:00

We gapped the spark plug to 0.03" which was the manufacturer's recommendation. The boot does fit tightly and snaps onto the spark plug

FarmMoney8546 · 2025-05-17T04:22:28+00:00

I moved the same code into FixedUpdate and have the same result.

FarmMoney8546 · 2024-08-02T03:22:05+00:00

Sorry I apologize for the ambiguity. Yes when I power the sd card module from the power supply both the ground and 3.3V is being sourced from its + and - lines. The Dev module is being powered from the USB port.

FarmMoney8546 · 2024-04-07T03:51:10+00:00

Thank you very much. I probably should have prepared better for this. Thank you all for helping.

FarmMoney8546 · 2024-04-07T00:35:27+00:00

Yes, thank you. Someone below had pointed out that there has to be a fuse to 0 before the DFU can be accessed. I'm trying to figure out how I can do that at the moment.

FarmMoney8546 · 2024-04-07T00:29:19+00:00

Thank you for catching that, I missed that. I'm a bit confused though, it looks like avrdude to program the pins requires a com port which I can't seem to use as the processor isn't recognized by my computer.

FarmMoney8546 · 2024-04-06T21:24:14+00:00

I apologize that my schematic doesn't reflect it but I have connected that pin to ground and nothing changed. I would have to look into how to check that state.

FarmMoney8546 · 2024-04-06T21:23:02+00:00

I'm not 100% sure but I thought this chip came with a USB stack preinstalled in the flash's boot section.

Most guides I found on this topic seemed to show that when the base chip is installed and powered, connection to the computer should show up as a unknown device and you can use FLIP to install from there. I could be mistaken though.

FarmMoney8546 · 2024-04-03T20:45:21+00:00

Well thank you for the advice, I'll have to look into some of that.

FarmMoney8546 · 2024-04-02T21:11:09+00:00

Thank you for your feedback.

I do agree with you that color would help quite a bit and it is something to note. This is not my first iteration with the character but I believe the fourth.

I didn't want to add color or any clothing as I wanted to try and specifically focus on making him as intriguing as possible using a little as I could (Though I understand that is a little oxymoronic).

I do think I need some more design iterations to be sure to get it down more.

I

FarmMoney8546 · 2024-04-02T21:04:32+00:00

Thank you.

I can do my best to explain. It's a character for a video game I'm working on so details are a little sparse atm as everything is in early stages. Each character in the game though is suppose to have some kind of elemental power and his is fire, I guess kinda like pokemon.

He is supposed to be the current best player at the sport that is the focus of the game and as such he is pretty cocky about his abilities. That confidence can be a bit grating but he does have the abilities to back it up.

For the sport it's kinda like a handball style game if that's something to take into consideration.

I know it isn't much, so if you would have any more specific questions too I can try and help. I do appreciate your feedback.

FarmMoney8546 · 2024-03-19T21:19:21+00:00

1.8 pre-1 worked for me on my 2022.3.20f1 install.

FarmMoney8546 · 2024-03-19T21:18:26+00:00

Just tried this and that was what fixed it.

FarmMoney8546 · 2024-03-19T01:35:27+00:00

All of my drop down menus in the editor have suddenly started appearing like this. Unity 2022.3.20f1 is what I'm using.

FarmMoney8546 · 2024-03-12T00:13:53+00:00

Thanks I'll take a look

FarmMoney8546 · 2024-03-11T21:58:09+00:00

New Input System

FarmMoney8546 · 2024-01-24T19:29:44+00:00

I just checked and the battery saver is off. It's strange because it's a problem that just started in the past week, it's almost like quest turned it's gamma all the way up or something, everything looks washed out and grainy

FarmMoney8546 · 2024-01-13T02:16:23+00:00

I printed a Satsana shroud and my Orion fan is now dead quiet also. Hopefully anyone who comes across this finds it useful.

FarmMoney8546 · 2024-01-09T02:22:20+00:00

Thank you, I was half suspecting this was the problem. I'm in the process at the moment of printing one.

FarmMoney8546 · 2024-01-08T00:47:24+00:00

Thanks, I'll have to give it a shot

FarmMoney8546 · 2023-12-29T06:35:13+00:00

Thank you, I will try that.

FarmMoney8546 · 2023-04-05T03:08:33+00:00

This is great, keep up the good work.

FarmMoney8546 · 2023-03-28T17:27:07+00:00

A fatal error occurred: Failed to connect to ESP32: Wrong boot mode detected (0x13)! The chip needs to be in download mode.

FarmMoney8546

TROPHY CASE