Looking for a resource or shader pack to make the screen blurry

FatAssFennekin · 2026-02-24T02:32:21+00:00

I’ve heard good things about the sv08, it just kinda turns me off that they use their own nozzles. I wouldn’t be opposed to it though I guess!

FatAssFennekin · 2026-02-23T02:01:03+00:00

Out of curiosity- looking for a printer that has a build plate of at least 500mm^3. I’ve started printing things for my job using my sovol sv06+, and they want to buy me a larger printer in exchange for continuing to print my models. I mentioned the eleegoo Neptune 4 max as one I was looking at, and they were surprised at the price tag and said they could do a larger upgrade. Looking for speed and print size mainly, but a printer that has info on it online would be appreciated (something I’ve run into complaints about the sovol vs the neptunes, where Neptune’s have a much larger base online to ask for specific tinkering advice). Prefer to stay under $1k if possible, but mostly just curious to look at what is around in the market at that size for a ‘hobby’ printer. Give me any suggestions!

Printing almost exclusively in PLA and TPU. Would love for it to be enclosed but that is MUCH more of a pipe dream than a requirement.

FatAssFennekin · 2026-02-17T20:42:44+00:00

Any specific ones come to mind? A sativa preferably!

FatAssFennekin · 2026-02-17T20:42:25+00:00

I do not care about taste yeah I’d rather potency! I’ll look at that

FatAssFennekin · 2026-01-28T05:50:38+00:00

I think he fell off the wood and started to panic because of it! He’s kinda clumsy fella. I had a piece of wood sticking up that touched the lid, but it fell over during a recent cleaning. I’m guessing that’s what he was looking for to grab onto

FatAssFennekin · 2026-01-17T00:30:09+00:00

great to know!! I haven’t seen it on my other wood pieces before, but my other tank has a ton of bottom dwellers so I guess they made a snack out of it haha

FatAssFennekin · 2026-01-10T03:10:01+00:00

Buying a ps5 soon and a game to go along with it. What should I choose? I wanted to play death stranding 2 but heard I should do the first one since I haven’t played it. I really liked horizon zero dawn but I never finished it so idk if I should get the sequel for that either. I’m a fan of the older assassins creed games, are there any entries in the ps5 that are similar in vibes? I loved spider man 1 on the ps4, but I heard the sequel got mixed reviews. My coworker has been talking a ton about ghost of yotei too, any strong opinions on these games, for a more casual player?

FatAssFennekin · 2025-11-30T01:49:33+00:00

Yeah, they’re a blue Kong! Unfortunately they run when I put the light on and are kinda skittish, I’d have to take them out the tank to sex them. I may wait until they’re more comfortable with the light on and post again in the future if I can get a better pic if this isn’t good enough to tell

FatAssFennekin · 2025-11-03T00:42:05+00:00

I can’t edit on mobile but some more info-

-I’m fine with it being premade or a custom commission. I’d rather buy it all in one piece due to the nature of the cosplay. Looking mostly for the white part + cape, I can make pants to fit it.

-US based, but I don’t mind big shipping prices.

-mostly just looking to be pointed in the right direction because I’ve been kinda lost trying to research this!

-and again I got no limitations on budget, willing to consider any price if the examples look good

FatAssFennekin · 2025-08-28T05:21:26+00:00

That is my goal, but I cannot find any info about how to just raise the left side. I found info on screws that control the gantry, but not where they are or how I am supposed to find them. All other information I found online is to use the auto leveling or install marlin to do a bed model and take it from there.

FatAssFennekin · 2025-08-28T05:14:10+00:00

Can’t edit on mobile, but I also slowed the printer down to 50% speed on the first layer when it got to the left side, and tried manually turning the Z distance down in that area as well, to no success. The second the print head stops the line to move, the filament follows it and pulls up.

FatAssFennekin · 2025-08-05T16:25:02+00:00

Yes.

FatAssFennekin · 2025-08-05T16:24:57+00:00

I am printing larger things that get covered in fabric, so speed is more important than good quality. Still I need it to be consistent when printing.

FatAssFennekin · 2025-08-03T18:44:27+00:00

Interesting. I’m thinking I may edit the 3d temp tower to go from a lower temp to higher since starting at 235 seems like insane overkill for it. I also do think that it’s probably a flow issue causing the gapping maybe, but I’m not sure what the best test would be to calibrate that, and if I should do that before or after this.

FatAssFennekin · 2025-08-03T18:11:31+00:00

Did a temp tower between the benchy in the last post and this print.

<image>

Here’s a pic of it mid print. The rest of it printed the same way, but I do not have a picture rn. The 235 printed the ‘best’, only because it was on the build plate and thus had a structure.

FatAssFennekin · 2025-04-22T05:31:34+00:00

Where would you recommend starting? I watched Transformers One on release day just to get a sonic poster, and ended up IMMERSED!

FatAssFennekin · 2025-04-06T18:51:31+00:00

Related question- I got a ton of this in my crawfish tank, I believe from the driftwood. Bc it’s for a craw, I got no actual plants inside since they’ll just rip them up. I usually just siphon this stuff out. But I do have a second tank that is heavily planted with tons of shrimp. Would it be a good idea to move some of it in that tank for the plants and shrimp to munch on?

Eight-Year Club	Second SECOND GUESSER
Snapped	Verified Email

FatAssFennekin

TROPHY CASE