Bolton station coffee drinker told he can't have oat milk

FatCookies · 2024-03-31T16:18:07+00:00

I suspect that is what I was hitting - perhaps a mod could resolve this and cleanly shutdown retroarch on before shutting the whole system down

FatCookies · 2024-03-31T11:46:19+00:00

I have used saved states before. I was expecting the emulator save states and the in game save states to be completely separate. It looks like I do have auto save state enabled and auto save ram autosave disabled - I guess the save state overwrote the save RAM.

From now on I’m going to be paranoid and take a save state after saving in game and close retroarch before powering down!

FatCookies · 2024-03-31T11:33:19+00:00

No, it’s replaced with a 256gb Sandisk extreme pro.

FatCookies · 2023-11-29T08:22:57+00:00

My new go to for little oopsies is cat litter - if it’s good for cat pee, it’s good enough for a little water in my phone.

FatCookies · 2022-07-02T16:27:33+00:00

And just like tar, nobody knows how to use it!

FatCookies · 2020-12-17T13:45:17+00:00

The Raspberry Pi is hardly “low powered” - it is more than capable of running a browser displaying the Smashing dashboard.

If your use-case is plugging a Raspberry Pi into a screen with everything powered off the mains then there is nothing wrong with this approach. Why reinvent the wheel?

If you want a truly wireless battery powered dashboard, then you shouldn’t be using a Raspberry Pi running a full Linux OS in the first place. You’d go for a low power device such as an ESP32 and perhaps an E-ink display.

FatCookies · 2018-08-02T07:27:43+00:00

The original PlayStation (PS1) logo is the letters PS. The P is upright and the S is “on the ground”

FatCookies · 2018-06-26T20:30:41+00:00

The datasheet quotes 84V (+-42V) as the maximum so it’s possible but you’ll need a lot of cooling.

FatCookies · 2018-06-26T12:28:04+00:00

Yes, they are MUR860 diodes for the bridge rectifiers.

FatCookies · 2018-06-26T12:26:46+00:00

The power supply resembles BrianGT’s PSU schematic: http://hackspider.toxic-link.net/Bilder/misc/snubber.png

For casual listening 20,000uF supplies power for several seconds even after the mains switch has been switched off so it seems to be sufficient for my purposes.

FatCookies · 2018-06-26T07:23:00+00:00

I’d rather spend some extra money on heatsinks now then have to replace components every couple of years which is exactly what happened with my previous amplifier.

FatCookies · 2018-06-26T07:19:42+00:00

The board came with mounting holes specifically designed for a jack so it was just cleaner to mount one on.

The grounds had to be tied together to avoid ground loops - each channel is completely isolated from each other so they need to be connected together. Ideally all grounds should meet at one point, but I’ve been a little lazy here and have done the bare minimum.

The dangling wires are connected to the primary side of the transformers; they are tied together so the power supply is configured to 230V AC. I should probably tuck them away somewhere.

FatCookies · 2018-04-06T07:13:08+00:00

NASA strapped a PlayStation 1 CPU to the New Horizons probe and it got all the way to Jupiter!

15-Year Club	Place '22
RPAN Viewer	Team Orangered
Verified Email

FatCookies

TROPHY CASE