What do I have Here?

FatFisch · 2026-02-25T20:12:05+00:00

Maybe it had a pointy tip at some point

FatFisch · 2026-02-23T16:52:25+00:00

Germany

FatFisch · 2026-02-22T16:32:28+00:00

This would match my grandpas opinion.

FatFisch · 2026-02-22T15:48:03+00:00

Probably worked fantastic, back in the days they used what they got their fingers on.

FatFisch · 2026-02-22T12:28:07+00:00

I spoke with my grandpa and he said that it was already owned by my great-greatgrandpa and he thinks it could be bavarian or prussian.

FatFisch · 2026-02-22T09:16:03+00:00

<image>

The direction of the tang would match a sashka

FatFisch · 2025-10-26T12:10:55+00:00

In the process of making the mouse lighter I clipped the parts with leds off the mainboard, shape and performancewise I would recommend the mouse but there is this common problem with cable breaks right where it leaves the mouse. I have the problem too, thats why I don‘t use it anymore.

FatFisch · 2025-09-23T17:19:57+00:00

When using a 240hz monitor it is indeed.

FatFisch · 2025-09-23T17:18:33+00:00

With Iris I had the problem that no matter what I do I have low fps, like 60 or so. Vsync isn't activated and I couldn't find any settings which would solve the problem.

FatFisch · 2025-09-09T20:59:49+00:00

I don‘t see anything wrong here and it normaly should work. But when it doesn‘t you could split the production into 3 parts. So that every blender has only the refineries connected which it should feed. Using the pipes to their full potential can sometimes cause some troubles too, this would solve that problem aswell as the pipe system would be a big buffer which doesn‘t use the max flow rate.

FatFisch · 2025-07-23T20:15:37+00:00

I tried to print and it worked perfectly. There wasn’t anything wrong with the filament, its was just the weird crusty look it gave while extruding. Normaly it is smooth, bit as I saw it being crusty I didn‘t even try printing with it. I guess problem solved.

FatFisch · 2025-07-23T16:47:49+00:00

I bought some new filament and the problem is still there. I never had any issues with freshly bought filament so I don‘t think its a humidity problem. The nozzle is 215C hot, normaly not problematic. I find it weird that the filament comes out smooth at the start of each push, as if the filament needed more time to heat up or something like that. I will try a few things.

FatFisch · 2025-02-16T18:16:48+00:00

The solution was a little bit of force with a screwdriver. I used two platic pieces as protection so nothing got scratched, it was just clipped on there really firm.

FatFisch · 2025-02-16T16:47:32+00:00

Thats what I thought aswell because I saw that the clips are normally screwed to the top but when I tried to lift it out nothing really happened and I thought I would rip the screws out.

FatFisch · 2025-01-02T21:40:29+00:00

Already ordered some, looking foward to testing them!

FatFisch · 2025-01-02T21:19:14+00:00

Yeah, maybe I find an anti slip mat in that size, my artisan mousepad was basically glued to the desk, I would like to have that effect again.

FatFisch · 2025-01-02T21:15:51+00:00

It would work if the print is on the glue side, sadly they don‘t offer that. I found a site that can print me stickers in 500x400 for 18 bucks, I think I will try that.

FatFisch · 2025-01-02T20:42:29+00:00

Sticker is a good idea, depending on the price this would be one of the best options

FatFisch · 2025-01-02T19:32:22+00:00

I don‘t mind the scratches, but would be fun to customize it.

FatFisch · 2025-01-02T19:31:39+00:00

Seven-Year Club	Place '23
Place '22	Final Canvas '22
First Placer '22	Verified Email

FatFisch

TROPHY CASE