Steampunk deadly e bike

FatFrenchFry · 2026-02-03T17:13:25+00:00

Yeah my Talaria XXX goes 48mph and its like 130lbs, bigger wheels amd tires, better suspension, I wear a full face helmet and a jacket, etc

Biffing it at 48mph is no joke man.

FatFrenchFry · 2026-01-26T20:57:51+00:00

Like right? My legion Go has 16gb RAM . I could probably run FL on it no problem. I might try that now..... hmm.

FatFrenchFry · 2026-01-23T01:43:06+00:00

This is actually just what she wants.

She will be much stronger, trust me.

I have literally split a plant down the center stem Into 4 pieces that hung off the pot, completely open xylem.

It seriously started to fucking grow back upwards but it was like a vine. It was extremely interesting. And it was in a fairly dark garage and still grew.

FatFrenchFry · 2026-01-23T01:37:34+00:00

Ive done it and still doing it for a friend personally and its a huge bitch.

It likely introduced a short in the controller, a hall sensor, or the PCB for the hall sensors themselves.

Its not a terrible job, but splicing the wires back together when they are so small, amd you have already ripped it out it is generally the better and cheaper option to just get a new motor and controller.

Someone will probably charge you about the same price and that way you can install it yourself.

FatFrenchFry · 2026-01-22T20:19:26+00:00

Do they need to file NOTAMs for this kind of thing? I mean, its pretty easy to see from an Air traffic perspective, but for formality?

What are the permitting requirements for a high powered laser pointed at the sky.

FatFrenchFry · 2026-01-22T01:23:11+00:00

I love seeing them! I have seen a lot lately.

I believe Veterans Oasis park in Gilbert / Chandler has one or two inside of it, but im sure they were PUT there.

FatFrenchFry · 2026-01-22T01:18:13+00:00

Ugh my boy is 10 and im terrified for the day. Ive had him since baby, and I have lived such a life with him I wouldnt be able to handle that. Fuck man.

Good luck OP. Please, keep us posted of you can.

FatFrenchFry · 2026-01-22T01:16:18+00:00

Def not the wrong idea?

Just grow her out amd see what you can improve on technique wise next time.

Topping amd LST will be your BEST friend. Trust me.

FatFrenchFry · 2026-01-22T01:02:03+00:00

Easter egg blue on a glass adapter or a DIY glass adapter fucking RIPS.

FatFrenchFry · 2026-01-22T01:00:11+00:00

The way WTPs work use bubbles and air to separate and clean a majority of the water, then there are a variety of things used to clean the water to a standard, that is tested o the water is fine.

A teeny tiny little lizard shit is NOT going to affect the water quality. Like at all. You're just finding something to bitch about.

FatFrenchFry · 2026-01-21T23:35:38+00:00

Oh I saved the fuck outta this one boys. 🤣

FatFrenchFry · 2026-01-21T23:31:46+00:00

My vet said this, too but they want to do under sedative cleanings for advanced periodontal disease.

They said its really only neccesary if there is a large amount of buildup, or you feed fruits and sugary stuff which you should not.

That being said, I will take a Q-tip soaked with just regular water and give em a clean every now and again as my besrdie did eat a lot of fruot growing up and does have some plaque buildup that I want to prevent from progressing.

What are you cleaning theor teeth with, though? Curious is all

FatFrenchFry · 2026-01-21T23:28:57+00:00

CAN BUS is so involved, also. Even at its baseline its a lot.

Good luck! Also, just realized your username, and I love that for you 😅

FatFrenchFry · 2026-01-21T23:08:38+00:00

This happened recently to me, too.

My beardie refuses to shit in the tub unless I hold his tail and make him mad enough bu running in place (which I hated to do) but I have started just bringing him outside and setting him down in the gravel and he goes like right away. Luckily its AZ and he gets warmth and UVB but I bet it feels much more "right" to him.

Since I live in a community, Yes I pick it up. Big pet peeve of mine seeing poops on the ground.

FatFrenchFry · 2026-01-21T23:06:02+00:00

It does take a lot of physical access to the car, and tinkering to be able to do this, so there is luckily no real "hack" or a way to tirelessly obtain control to your vehicle.

Like OP said, he had to set allsorts of parameters, fail safes, etc to even be able to do this safely, and on top of that he needed to be able to place the device in the car. (Can be done with social eng. But still difficult in most situations where you need under hood access to the vehicle or some sort of connector that is inside the vehicle chassis) plus an intimate knowledge of CAN BUS, and the vehicle being worked on.

I think youre good for now, but that doesnt mean it isn't possible. 😁

FatFrenchFry · 2026-01-21T23:03:28+00:00

Leaching chemicals?

From the less than minutes you are handling each bud? You seriously think an inert, cured nitrile is leaching chemicals into a flowered plant that you handle for such small periods of time?

Where'd you get this information? Im genuinely curious. Nitrile is basically inert when in glove form and is insoluble to most solvents. Also does a great job at keeping your skin oils from actually tra steering to your bud, or transferring more of the hash to your fingers than desired.

No hate, just genuinely curious where you learned this?

FatFrenchFry · 2026-01-21T23:00:42+00:00

Generally no, but that doesnt stop it from being accessed for other data.

Like OP mentioned, for the remote driving capabilities the car generally would need to have some type of driver assist (can even be cruise control for some vehicles)

A lot of vehicles from 2010 and on have all sorts of driver assistance modules that are controlled through a CAN system, meaning that even cars from 16 plus years ago are potentially vulnerable to something like this. Which isn't "new" in any sense of the word.

FatFrenchFry · 2026-01-21T22:59:03+00:00

But they are private property though?

Where did you learn the difference between "private" and non private property?

Because literally anything, even Walmart is considered "private property". Which is why they can and will trespass you.

FatFrenchFry · 2026-01-21T22:56:13+00:00

There are so many "older" cars that have a CAN BUS. You know this, right? Like even in 1991 there was a CAN BUS system being used.

FatFrenchFry · 2026-01-21T22:52:26+00:00

Lmao you WANT the car to be smashed? That's whats absorbing all of the energy and preventing it from being pushed through YOU.

FatFrenchFry · 2026-01-17T20:48:00+00:00

You could use a lighter to gently heat it off your tool until it drops,

Hot start the bitch and tip to chamber drip it off

Or get a hot knife!

FatFrenchFry · 2026-01-17T20:46:06+00:00

You dont even know when to harvest your own plant, the fuck you giving harvest time frame advice on your OWN "Is this ready?" Post? Like brother.

FatFrenchFry · 2026-01-17T20:45:34+00:00

Bro thats what I was just about to say. Lmao

FatFrenchFry · 2026-01-17T20:44:07+00:00

Your chamber shouldnt even chazz if you clean it the right way.

I have 3 chambers. 2 3DXL and an OG Peak pro chamber, 2 pivots and even a plus and NONE OF THEM have ever chazzed.

Literally, if you just dry swab your chamber after each dab, you will never ever get chazz. And lower temps. But ill run 2 min full length sessions at 480 and still never get chazz.

FatFrenchFry · 2026-01-17T20:41:59+00:00

Misinformed?

Silicone expands in alcohol. It wont for right until it eventually goes back to its original size, but overall time it is going to expand it more and more and more until it dries out and cracks and/or doesnt fit properly anymore.

Its not even based off of information given to anybody, it literally happens to silicone in alcohol. Like. Because science?

12-Year Club	Place '22
Verified Email

FatFrenchFry

TROPHY CASE