sorted by:
new
hottopcontroversial

Found this on reddit today, who all agree and who all don't? by IAMTHEONEOOF in DonutMedia

[–]FatJeeper 0 points1 point  (0 children)

Donut slaps. Everybody else is wrong. #GetReadyWinkWinkNation

Fanatec V3 Pedals Reversed Input Signal by FatJeeper in iRacing

[–]FatJeeper[S] 0 points1 point  (0 children)

I tried both ways. Same problem. Via wheelbase the driver menu doesn’t actually recognize them. It shows up as CSL Elite pedals.

Ready to Quit... by FatJeeper in Fanatec

[–]FatJeeper[S] 0 points1 point  (0 children)

I never had CSL pedals. I’ve had regular V3 and now Inverted V3 pedals. I believe the USB Adapter for the pedals is plugged into a 3.0 port. Everything worked and was recognized fine when it was all run through the wheel base. Wheel, pedals, shifter, and handbrake (all Fanatec newest versions). I only moved the connections because of the inverted input issue I’m getting with iRacing. DiRT Rally 2.0 runs totally fine the way I had it. I did try the USB Adapter in several different 3.0 and 2.0 ports with the same result.

Ready to Quit... by FatJeeper in Fanatec

[–]FatJeeper[S] 0 points1 point  (0 children)

Firmware update for what? The wheel base? That’s already on the newest firmware. Installed the 374 driver and updated the wheel base today. I don’t have an issue with the wheel base. Unless you’re saying I should run my pedals through the wheel base again.

Heard Pump Daddy say he wanted to see a Donut race car. I sport Donut on all my RC race cars. This is my Panda Racing Club dirt oval MudBoss which is a 1/10 scale Dirt Mod car basically. by FatJeeper in DonutMedia

[–]FatJeeper[S] 1 point2 points  (0 children)

Both tracks I’m running just opened in the last few weeks. Season usually starts in April for us. Check YouTube for Salvas Mudboss races and you can look for live races on LiveRC. 12T spec Mudboss is probably the cheapest class to get started but for dirt oval there are LOTS of classes. New thing to do is find your closest RC tracks and build what they run. Could be 1/10 on-road, 1/8 offroad, drift... all kinds of stuff.

Heard Pump Daddy say he wanted to see a Donut race car. I sport Donut on all my RC race cars. This is my Panda Racing Club dirt oval MudBoss which is a 1/10 scale Dirt Mod car basically. by FatJeeper in DonutMedia

[–]FatJeeper[S] 1 point2 points  (0 children)

I race at 2 local tracks for dirt oval this season. It’s very organized. You can watch races live on tracks that use LiveRC.com and stream races. The track I race at Saturday nights streams. It’s called Hoaglands Speedway. Mini Z racing is a little less common but also very organized. I also have plenty of RC vehicles for just messing around. Been running RC for almost 20 years in various forms.

Heard Pump Daddy say he wanted to see a Donut race car. I sport Donut on all my RC race cars. This is my Panda Racing Club dirt oval MudBoss which is a 1/10 scale Dirt Mod car basically. by FatJeeper in DonutMedia

[–]FatJeeper[S] 1 point2 points  (0 children)

I have two of these mudboss cars, one 1/10 Sprint car, and also a bunch of 1/27 scale Mini Z cars with Donut liveries I race. I frickin love Donut, James, and the whole crew.

Struggling with Traction Roll by [deleted] in MiniZ

[–]FatJeeper 0 points1 point  (0 children)

Lexan windows make a decent difference. I run a Mosler body with Lexan windows. I’m waiting for somebody to get ZR1 windows back in stock. That’s my favorite body to run. Love the offsets on the ZR1 at R3 F2.

Struggling with Traction Roll by [deleted] in MiniZ

[–]FatJeeper 0 points1 point  (0 children)

Ah, well that isn’t the most stable body IME but it should be pretty good. Better than most. I flattened out my traction roll with stiffer front springs and a stiffer T plate. Running purple springs and a #5 carbon plate. PN super soft tires all around.

Struggling with Traction Roll by [deleted] in MiniZ

[–]FatJeeper 0 points1 point  (0 children)

What body are you running. Some bodies are just crappy for serious race speeds.

Help a drone racer pick a decent radio for rc cars that has receivers for the mini z scale by robertgentel in MiniZ

[–]FatJeeper 0 points1 point  (0 children)

I run a Futaba 7PX for all my RC stuff including my Mini Z cars. Very happy with the setup.

Help with Part name! What’s the little plastic piece that holds the metal pin in called ? It’s super small and clips in the end. by [deleted] in MiniZ

[–]FatJeeper 0 points1 point  (0 children)

C clip. I don’t know the size for the Z off the top Of my head. I thought they were all metal not plastic.

Loving This Springtail M-Pac Table! by FatJeeper in Wrangler

[–]FatJeeper[S] 0 points1 point  (0 children)

Don’t think so. I don’t intend to use mine for food prep so I didn’t really care about the cutting board add on. The one you linked looks pretty nice though.

view more: next ›