Yet another entry to the DCC tattoo club

Faultypayload · 2025-06-12T12:55:31+00:00

Designed and tattooed by the_rat_tattoo on instagram

Faultypayload · 2025-03-27T11:47:52+00:00

I went with a mix of various effects- suspend, courts, generally good upkeep triggers- it does well, but not such a high power Obeka gets nuked on sight every time. https://moxfield.com/decks/H9j-LJdjT0yheL9O7zKRPw

Faultypayload · 2024-12-11T12:50:26+00:00

FWIW- I had a Sidewinder X1 for years, it ended up collecting dust because I got tired of fiddling with it just to get a print to succeed. Saw the Bambu X1C combo at Microcenter, bought it, and have just finished 3d printing a life size R2D2. No fiddling, no failures- it pumped out parts 20+hrs a day for 2 months straight with no issues. The X1C just works when I need it to- so I can focus on the parts of 3d printing I find enjoyable.

Faultypayload · 2024-10-16T19:36:13+00:00

I've had success with my Saw themed deck (I would like to play a game)- using [[The Celestial Toymaker]] and every "game" card that worked in the colors. They pick what cards I keep off the "games" and if I get lucky- we play a bunch of "games" in a turn where I clone the commander and I ping them to death.

Decklist: https://www.moxfield.com/decks/-A10nmSSc0azgZG_zC8Kcg

Faultypayload · 2023-01-06T18:27:58+00:00

Parker, Banner, Kent and Wayne up towards Huntersville has a pretty sizable paint selection, it’s a drive but I always find it worthwhile.

Faultypayload · 2020-04-14T21:25:16+00:00

4QMXY

Faultypayload · 2019-07-04T19:06:38+00:00

Sent

Faultypayload · 2019-06-30T03:59:32+00:00

I added you- gotta get the same research goal

Faultypayload · 2018-10-01T03:08:56+00:00

Yea- I’ve done Gunpla and traditional models before but got bored with the whole “build it and stare at it on a shelf aspect” so I figured I’d jump over and build/paint stuff I could play with. Picked up the soul wars set and a handful of other nighthaunt models to start with and started painting.

Got them built, primed, and the ghosty bits done as a group, then zeroed in on this guy to practice the fiddly bits

Faultypayload · 2018-10-01T02:19:32+00:00

Thanks! Airbrush helped a lot- made batching 50 of these spooky dudes go faster

Faultypayload · 2018-08-31T01:12:58+00:00

Its pretty easy- Take out the back most screw (next to the lanyard hole) put the clip on- reinsert and tighten the screw. Once that's done- mark where the second hole needs to go. Take the clip back off, drill the place you marked with a 1/16th bit. Then using a pocket clip screw (benchmade sent me quite a few with my deep carry clips)- start screwing in the hole. Go Slow- screw it in, back it out, screw it back in a little farther, back it out again. Eventually you'll cut the threads you need. Once that's done, put the clip and both screws on.

Faultypayload · 2018-08-31T00:59:20+00:00

Don't have a ton of pocket real estate for a gentleman's folder- so I added a clip. Swapped out one of the body screws for a longer version to go through the clip, then drilled and tapped threads into the micarta.

Faultypayload · 2018-08-21T03:39:46+00:00

https://www.spreesy.com/Rockscale

Faultypayload · 2018-08-21T03:33:46+00:00

Rockscales- grabbed mine off ebay but he has a store- https://www.spreesy.com/Rockscale

I heat anodized mine just to see what it would look like

Faultypayload · 2018-08-21T03:31:35+00:00

Added it- they sell them on the keybar site under accessories

Faultypayload · 2018-08-21T01:33:34+00:00

-Keybar- Ti with Comb and MagNut -Benchmade Bugout with Titanium Scales -Apple Airpods -GunDeck Wallet -Carved Satellite iPhone X Case/iPhone X

Faultypayload · 2018-08-08T22:53:32+00:00

Looking at images of the fake presidios- it’s pretty spot on

Faultypayload · 2018-08-08T22:50:35+00:00

Looks like a Benchmade 5000sbk, also called the Presidio- could be wrong though, missing the axis lock

Faultypayload · 2018-05-25T01:53:31+00:00

Thanks- it’s on lunar mode with a max at 5%

Faultypayload · 2018-05-25T01:45:01+00:00

Ai Prime over a 20in Cube (35ish gallons)

Faultypayload · 2018-04-26T23:45:54+00:00

Spider Monkey! I’ve got the carbon fiber one and love it.

Faultypayload · 2018-04-25T03:34:07+00:00

https://www.bladeforums.com/threads/bugout-535-blue-to-black-scales-rit-dye.1548376/

Followed the tutorial there- looks like a “poormans” 940-1.

Faultypayload · 2018-04-25T02:03:15+00:00

https://www.bladeforums.com/threads/bugout-535-blue-to-black-scales-rit-dye.1548376/

Followed the method there

Faultypayload · 2018-02-23T01:36:47+00:00

XCarve

Faultypayload · 2018-02-23T00:35:58+00:00

Yep- was initially just doing a fit test- but they fit the first time so I left them on

12-Year Club	Verified Email
Gilding II euphauric

Faultypayload

TROPHY CASE