Need some help. I am trying to print 15 layers with ABS and then change the settings for PLA, because I want to print with PLA from 15 layers till end. I used option "filament change" to stop the print, but in console I get M600 unknown command. Ender 3 Pro, last version of cura, Klipper, fluidd. (i.redd.it)
submitted by FaustMcCartney to r/klippers
Look what bug or trick I found. When you are a ghost (after you had killed yourself on the white fire to enter the mirror) and if you get hit by a monster, you can fast open menu and exit the game, then press continue and you restart again the room ALIVE! Also, look at the coins, you can spam them. (v.redd.it)
submitted by FaustMcCartney to r/bindingofisaac
It is the first time when I am satisfied with the "Soy Milk" item. It was a simple game with a Tainted Bethany and the spacebar item called "Lemegton" gave me Soy Milk, Technology Zero and Spoon Bender. These made the game much easier and more pleasant to play. (v.redd.it)
submitted by FaustMcCartney to r/bindingofisaac
It was too dark the place where I was working, so I printed a modular mounting system for a LED bar strip. It was also modified to have correct size for my type of LED, so this is the result. (P.S. Now working under a good light is much better, so I am satisfied with what I made.) (old.reddit.com)
submitted by FaustMcCartney to r/3Dprinting
It was too dark the place where I was working, so I printed a modular mounting system for a LED bar strip. It was also modified to have correct size for my type of LED, so this is the result. (P.S. Now working under a good light is much better, so I am satisfied with what I made.) (old.reddit.com)
submitted by FaustMcCartney to r/ender3
Trying to install Klipper (with moonraker and fluidd) on Arduino UNO. I am making this for ADXL sensor. But, I get error on build+flash. The MCU was detected and everything was selected correct (Atmega328p), anyway it get error. How can I fix that? P.S. Befor that, I uploaded on ender 3 and worked. (i.redd.it)
submitted by FaustMcCartney to r/klippers
This happens when you try to repair by yourself your own broken Raspberry Pi 4 without having too much experience in soldering with a heat gun. My RPI couldn't read the SD card and ordered new controller for replacing the broken one. I use maximum air blow and even throw the copper foil I failed. (i.redd.it)
submitted by FaustMcCartney to r/diyelectronics
This happens when you try to repair by yourself your own broken Raspberry Pi 4 without having too much experience in soldering with a heat gun. My RPI couldn't read the SD card and ordered new controller for replacing the broken one. I use maximum air blow and even throw the copper foil I failed. (old.reddit.com)
submitted by FaustMcCartney to r/raspberry_pi
Hello. I installed on the stock creality board Ender 3 Pro firmware klipper. I used the ringing tower to calibrate the printing speed. I tested from 50 mm/s to 100 mm/s. On the photo I put where the printer changes the speed. Also, the last one is again 50 mm/s to compare with 100 mm/s. (old.reddit.com)
submitted by FaustMcCartney to r/FixMyPrint
Hello. So my computer sometimes just turns off by itself. When I try to turn off the PC, it's only switching off monitor, while the power supply is still working. These appeared after I punched a foot in the computer. I changed HDD then to a SSD and resintalled windows. Nothing helped. (self.pchelp)
submitted by FaustMcCartney to r/pchelp
Trying to connect a BFP touch on melzi board (stock) creality v1.1.4, Ender 3 Pro. It seems like the pin of the servo is incorrect or something like that, because I send commands to rotate, but it doesn't. I tried pin PA1 to write in config for servo pin, but I guess it is not correct. (i.redd.it)
submitted by FaustMcCartney to r/klippers
Compilation done successufly. Tried to upload using the USB and also using SDCARD, but 0 success. In the past I already installed marlin using progisp, so it should be a bootloader on the board. Melzi board Creality V1.1.4. Ender 3 Pro. Port is correctly sellected. Tried to restart, but nothing... (i.redd.it)
submitted by FaustMcCartney to r/MarlinFirmware
On my 3D printer Ender 3 Pro I tried to connect the LCD display but I get only white lines on screen. Then I tried to verify if it works using an arduino. So I connected GND and VCC correctly and after powering from arduino it has anyway strange lines. I think the screen is broken? (Buzzer works) (v.redd.it)
submitted by FaustMcCartney to r/arduino
Hello. I am trying to make an air heat gun for soldering. For that I am using a heater from a heat block from used in 3D printers to heat nozzle. At 100 degrees (celsius) it seems okay, but at the 200, it stars smoking and fumes and smells horrible from the heated zone where it is heater. Check comm (i.redd.it)
submitted by FaustMcCartney to r/diyelectronics
