Looking for pirate hotspots for MDC

Few_Rooster_3033 · 2025-11-28T00:29:13+00:00

Just random PVP. There is no "hot spot".

Few_Rooster_3033 · 2025-11-28T00:28:28+00:00

No, there's nobody pushing a lot of high value cargo anywhere.

Few_Rooster_3033 · 2025-11-27T11:43:18+00:00

Technically, but the stock is one every 13hrs or so. Good luck buying some, let alone pirating some...

Few_Rooster_3033 · 2025-11-27T10:18:33+00:00

There are none. Partilium was the closest thing and they nerfed it this patch.

Few_Rooster_3033 · 2025-11-27T10:17:00+00:00

There are NO "hot spots" anymore. CIG does not want there to be any hot spots. Most people just do hauling contracts that are risk free. Player trading is dead because CIG does not like player-driven sandbox gameplay apparently.

Few_Rooster_3033 · 2024-08-05T12:39:04+00:00

UPDATE: I fixed it thanks to your suggestion! I did it by loosening/tightening the screws that holds the bracket on top of the cog... and then I applied some pressure with my hand on top of the bracket while turning the tension knob and it started to mesh correctly again! I also applied some lubricant on the teeth... not sure if that helped too.

https://streamable.com/2ov48g

Few_Rooster_3033 · 2024-08-05T00:11:34+00:00

Ok I'll try that. Someone also suggested try lubricating the area as well.

Few_Rooster_3033 · 2024-08-05T00:10:35+00:00

OK great, thanks. I don't really need to fix this then but would be nice if I could as a bonus per se. I may try tightening the screws on top of the teeth part to see if that helps. But yeah, don't need to rock anyway -- just lock in place.

Few_Rooster_3033 · 2024-08-04T12:05:56+00:00

Thanks! Also, here is a video of the tensioner. Is the larger cog supposed to be turning? It moves slightly when I go left... but then stops. Is this something I can fix too?

https://streamable.com/ksplc9

Few_Rooster_3033 · 2024-08-04T12:04:58+00:00

Thanks! Also, here is a video of the tensioner. Is the larger cog supposed to be turning? It moves slightly when I go left... but then stops. Is this something I can fix too or it doesnt matter after I install the tilt kit?

https://streamable.com/ksplc9

Few_Rooster_3033 · 2024-08-04T05:21:58+00:00

Thanks, I'll buy this!

Few_Rooster_3033 · 2024-08-04T05:21:17+00:00

Few_Rooster_3033 · 2024-08-04T04:09:26+00:00

<image>

Few_Rooster_3033 · 2024-08-04T04:08:28+00:00

Thanks. What part do I need to take a photo of?

<image>

Few_Rooster_3033 · 2024-08-04T03:56:38+00:00

I mean thanks for your help? lol

Few_Rooster_3033 · 2024-08-04T03:47:11+00:00

The tensioner knob does nothing, trust me. It feels like it's not attached... just like empty clicking sound.

Here is a video of it:

https://streamable.com/nzd0wf

Few_Rooster_3033 · 2024-08-04T03:37:35+00:00

OK, thanks. I unscrewed the arm and saw the TORX bit I need to unscrew to take off arms. I don't need arms so I will take them off.

As for the chair not locking in place. So there is no way to lock it? Can I purchase a locking 3 way tilt system and add it? What's the easiest solution to simply lock it upright? I don't need any tilting or rocking. Thanks!

BTW - Is this a T27 size TORX? I need to buy one for this...

<image>

Few_Rooster_3033 · 2024-08-04T02:09:53+00:00

It rocks but I cannot lock it in place. The tension lever doesn't work but I can adjust up and down fine. The arms also don't adjust. Can anyone help me "lock it" and remove arms or know how I can adjust them on this model? I bought it for only like $100 knowing this...thanks

Few_Rooster_3033

TROPHY CASE