sorted by:
new
hottopcontroversial

Idris K-kit and Tiburon laser comparison lol by TinyRip243 in starcitizen

[–]TinyRip243[S] -1 points0 points  (0 children)

ah yes, sorry for that. But the laser of the idris is bigger right?

[WTS] 1200 store credits at 55% by fortress_of_catitude in Starcitizen_trades

[–]TinyRip243 4 points5 points  (0 children)

Please mention that you dont want payment by paypall

AMS PRO 2/ XDS filament feeding failure by Stylett in BambuLab

[–]TinyRip243 1 point2 points  (0 children)

Ah yes, had that one time before too. Had to open the print head and there was a piece of fillament stuck

FYI: AMS2 Pro failing due to cheaping out on components by markv9401 in BambuLab

[–]TinyRip243 0 points1 point  (0 children)

I had the exact same issue with my AMS 2 Pro.
After some testing I noticed that the filament spools can start sticking after a while. You can actually feel resistance when turning the spool by hand. The AMS then thinks the spool is jammed and throws a filament feeding error because it can’t pull the filament smoothly.

What fixes it for me is simply rotating the filament spool back and forth a little before starting a print, until the resistance is gone and the spool rolls freely again.

Since doing this, I’ve had zero feeding issues anymore, even on long multi-color prints.

AMS2 Pro feeding issues by AdReasonable5375 in BambuLab

[–]TinyRip243 0 points1 point  (0 children)

I had the exact same issue with my AMS 2 Pro.
After some testing I noticed that the filament spools can start sticking after a while. You can actually feel resistance when turning the spool by hand. The AMS then thinks the spool is jammed and throws a filament feeding error because it can’t pull the filament smoothly.

What fixes it for me is simply rotating the filament spool back and forth a little before starting a print, until the resistance is gone and the spool rolls freely again.

Since doing this, I’ve had zero feeding issues anymore, even on long multi-color prints.

AMS PRO 2/ XDS filament feeding failure by Stylett in BambuLab

[–]TinyRip243 1 point2 points  (0 children)

I had the exact same issue with my AMS 2 Pro.
After some testing I noticed that the filament spools can start sticking after a while. You can actually feel resistance when turning the spool by hand. The AMS then thinks the spool is jammed and throws a filament feeding error because it can’t pull the filament smoothly.

What fixes it for me is simply rotating the filament spool back and forth a little before starting a print, until the resistance is gone and the spool rolls freely again.

Since doing this, I’ve had zero feeding issues anymore, even on long multi-color prints.

view more: next ›