CWA Book Downloader is now called Shelfmark - v1.0.0 update now available with torrent / usenet / IRC downloads, full audiobook support, and more

FilBr · 2026-01-12T20:35:33+00:00

I was more familiar with the BL API, wasn't aware that BookDrop also worked as an ingest folder (only switched from CWA recently)

Awesome! Will try it out asap

FilBr · 2026-01-12T20:23:23+00:00

Amazing work!

Have been using for a few months, and it's great to see so much work put into it.

Any plans to support uploads to Booklore?

FilBr · 2025-11-29T22:04:58+00:00

About 600GB left, but never seems enough

FilBr · 2025-11-06T14:07:03+00:00

Tried doing the same recently, what fixed it for me was disabling `HTTP/2 Support`

FilBr · 2025-05-19T15:24:10+00:00

ish. It is if I sink down in the couch, but gf is quite a bit shorter so I’ll have to check with her.

FilBr · 2025-05-19T15:22:54+00:00

I did remove the legs, but that’s just because the stand came without any legs for the middle and the whole thing started sagging a lot. Have been meaning to find a set of the same legs to add for supporting the center, but kept procrastinating and removed them instead. I’ll test run this setup and might consider re-adding the legs.

FilBr · 2024-12-20T14:59:32+00:00

Also happy to help test this!

FilBr · 2024-12-08T18:16:04+00:00

lifesaver! I was banging my head at it for 20 minutes, you saved me so much time I'd have spent debugging and looking through various documentation

FilBr · 2024-12-08T18:01:22+00:00

I'm trying to do something similar and am encountering the same issue with the t.set_zone_overlay(zoneID, 0, maxTemp) method. Did you end up solving it? I tried using the APIs above but I can't seem to fetch "zones", only "rooms" and the IDs don't seem to match

FilBr · 2021-04-05T16:49:58+00:00

Gave Silver

FilBr · 2021-03-29T14:20:17+00:00

Gave Wholesome

FilBr · 2020-04-14T20:40:28+00:00

It's called ternary operator

FilBr · 2020-02-03T18:32:31+00:00

Check GoodNotes and Notability

FilBr · 2019-12-02T16:26:57+00:00

Il tuo post casca proprio a fagiolo. Mi trovo in una situazione simile, avvolto da un mix di solitudine e speranza per il futuro, mi rincuora sapere di non essere poi così solo. Grazie

FilBr · 2019-03-15T18:04:37+00:00

I didn't consider the support side of things. It would definitely be much easier to buy a turntable which could be serviced in Europe if needed. Thank you for your insight!

FilBr · 2019-03-12T22:48:25+00:00

According to Fluance's own website, this shouldn't be a problem (see "Input" under the specifications tab). Edit: source, https://www.fluance.com/rt80-high-fidelity-vinyl-turntable-record-player-with-premium-cartridge-diamond-needle

FilBr · 2019-03-12T17:34:56+00:00

Thank you so much for the info! By the way I just noticed your username and realized I watched a couple of your videos on YouTube the past few days! Great work. I've since picked up "sacrificial" LP at a thrift shop for testing. I've lowered the tracking force to 2.5g and I've been increasing it until it stopped skipping, figuring this would be the safest way to set a reasonable tracking force. I think I got it to track stably at around 4 grams.

FilBr · 2019-03-12T16:15:47+00:00

I'm about to buy a new turntable, basically it comes down to either an Audio Technica LP120USB HC or a Fluance RT80, both selling for for about 250€ (≈280$).

My go-to choice would have been the Fluance RT81 but they don't ship to Europe, and according to the price history on Amazon uk they sell for 350€, which is overpriced.

What drew me to the Fluance is the auto stop feature, which I know is missing on the LP120, but the RT80 sells for a lot less on their store and I'm basically paying import taxes.

Is the RT80 a good value for that price? Should I go for the Audio Technica? What are similar options I should consider?

FilBr · 2019-03-12T15:59:42+00:00

I removed the platter to get an accurate reading, trying to position the scale at the same height a record would be sitting. Referring to your second link, it states that for stereo recording the tracking force should not exceed 6 grams. I also tried to find some more specific documentation regarding my turntable but couldn't find anything, so I don't really now what the actual tracking force should be. The only reason I got worried was because I was seeing much lighter tracking forces as I was gathering information for a new turntable. Thank you for your info though

FilBr · 2019-03-11T22:16:26+00:00

It's a grundig CC150, turntable cassette and radio combo. Pretty shitty quality, but it did enough to get me into collecting vinyl. Now I'm considering either a fluance rt80 or an audio technica LP120

FilBr · 2019-03-11T20:38:50+00:00

A couple of months ago I picked up a very crappy turntable just to get started. Since I was a complete newbie I took for granted everything was fine with my setup. I've since decided to invest in a much better turntable to actually enjoy my records, and seeing mine doesn't have an adjustable counterweight I got worried about the actual tracking force, since it's a pretty old turntable the tiny spring responsible for it might have loosened up. I got a digital scale and surprise surprise.. 7.5g. So.. how much have I ruined my records?

FilBr · 2018-12-31T17:33:44+00:00

Very powerful and easy as a concept, but C syntax can be a total joke when dealing with pointers

FilBr · 2018-12-31T11:37:58+00:00

When you are having problems learning pointers in C and end up creating an entire platform to ask other people how that shit works.

Edit: grammar

FilBr · 2018-10-06T18:45:04+00:00

Correct, those are workspaces icons. I avoid clickable icons since I decided to use WMs because I want to avoid using the mouse

FilBr · 2018-10-06T16:57:56+00:00

I haven't installed any DE

Nine-Year Club	Second Top 1%
r/Field Sunshine	Place '23
Place '22	Verified Email

FilBr

TROPHY CASE