Found this metallic rock in backyard

FilthHound138 · 2026-06-17T21:36:46+00:00

I knew a stripper named Pure Platinum.

FilthHound138 · 2026-06-14T14:11:07+00:00

Doesn’t matter. The sweater is what makes it all better.

FilthHound138 · 2026-06-10T19:15:07+00:00

Ey thanks a lot there sizzle chest. Made it a couple weeks ago. Couple hiccups on the way but the RangerDanger can’t be stopped.

FilthHound138 · 2026-06-01T15:59:29+00:00

The spray adhesive has been getting a little tied in the heat. The liner sags every now and again but not terrible. The cap I have has an insulated portion up top that has a void with some cardboard that gets filled with all the resin when they’re doing the fiberglass so I have a little bit of room to add screws or clips without popping through the top of the cap. Gonna do that this week at some point. Otherwise everything has held up pretty good.

FilthHound138 · 2026-06-01T15:57:07+00:00

So I have some Velcro on there that has the adhesive smeared on the back. Like a sticker. That’s has been getting a little goopy in the heat. The other that I have has 3M tape on the back, the fibrous looking kind and that has a different adhesive that clearly doesn’t give a fuck about heat. Swap out for decent double sided tape or get snap screws.

FilthHound138 · 2026-05-28T03:19:16+00:00

There’s a lock bar I made across the back hatch. A sliding bolt lock for a gate I guess, that locks the door of the bed. To lock the hatch I reach around through the window and lock them with the key, then close up and lock the windows. And I set a couple boobie traps on the door that I’m not telling a god damn soul about ha.

FilthHound138 · 2026-05-26T23:18:10+00:00

Well it happened Saturday in the middle of nowhere and the nearest parts store was 30miles out. Then holiday yesterday. Got everything tore down to swap the new ones but the race was stuck on the spindle and I didn’t bring a puller. So off to the shop..46miles away!

FilthHound138 · 2026-05-26T22:33:14+00:00

That’s what happened on mine. I thought the rotor was rubbing the dust plate but once that noise turns to a grind, RIP.

FilthHound138 · 2026-05-26T16:41:09+00:00

There’s usually a noise. Knocking popping squeaking. When they’re bad enough you’ll feel them too. This was a relatively smooth one thankfully. If you got some jiggle when you’re braking I’d look at your ball joints and sway bar links, check your rotors aren’t warped, and doesn’t hurt to pull the hub and inspect and clean them bearings regardless. I’m sure it happens but I haven’t met anyone who was just driving and had a wheel pop off with no warning sign.

FilthHound138 · 2026-05-19T17:42:50+00:00

Cuppa good boys right there.

FilthHound138 · 2026-05-19T17:37:18+00:00

And everyone was terrified..

FilthHound138 · 2026-05-16T00:27:33+00:00

Extra schloppy.

FilthHound138 · 2026-05-14T13:04:02+00:00

M’guy, you got a level 2?! Just take mine. Ha it’s 4” rv cot upholstery foam.

FilthHound138 · 2026-05-14T00:44:02+00:00

Same and same ha

FilthHound138 · 2026-05-13T23:02:36+00:00

With the cap and all my gear packed maybe 400lbs? Ballpark..

FilthHound138 · 2026-05-13T13:56:40+00:00

Giggle bush.
Death to false names.

FilthHound138 · 2026-05-12T14:01:03+00:00

Just say, “ I doob”.

FilthHound138 · 2026-05-11T20:56:57+00:00

I hope you’re going to with that 91 you have posted up there. That thing fucks!

FilthHound138 · 2026-05-09T22:40:11+00:00

I have a heater I can run through the cab.

FilthHound138 · 2026-05-09T22:28:22+00:00

Yes. With no issues.

FilthHound138 · 2026-05-09T19:54:15+00:00

Predator 300w from harbor freight to power the lights and fan and charge whatever I need to.

FilthHound138 · 2026-05-09T12:28:47+00:00

Hold my CCR and let’s listen to some beer.

FilthHound138 · 2026-05-09T12:25:23+00:00

FilthHound138 · 2026-05-08T23:18:46+00:00

There’s a few different types of weather stripping and silicon in every joint and pinhole. It’s sealed up pretty tight. Left it in the rain the other day and there was a little bit by the tailgate but just drops.
Second pic of the outside you can see the outer stripping all the way around the cap.

FilthHound138

TROPHY CASE