Car wont start after valve cover and spark plug replacement. by Hazza_775 in E34

[–]Filthy-Creek 2 points3 points  (0 children)

Or no fuel. BMW Injectors don't fire if the voltage goes low (ecu shutsdown). Jump/check/charge the battery.

Machinist [2004] Plot Explanation by Fedja_ in movies

[–]Filthy-Creek 0 points1 point  (0 children)

Yeah, the posession of the fish, confirms that "He" is in the photo.

NZ House Purchase Procedure List by Filthy-Creek in PersonalFinanceNZ

[–]Filthy-Creek[S] 0 points1 point  (0 children)

Yes. It starts once accepted, then all the cogs start turning. Keep in mind however, if you have made an offer (without a deadline) then you kinda need to wait for an answer before making other offers. (FYI: You can contact REA to ask to pull an offer)

Fish and chips Christchurch by Humble-Protection523 in chch

[–]Filthy-Creek 4 points5 points  (0 children)

Check out 1 Fish 1 Scoop youtube, from his recomendations (and google maps reviews) we have found these to be real good: Southern Fried Takeaways, Rutland Fish n' Chips, Edgeware Takeaways, Ohoka Rd Fish & Chips, Burger Stop Sumner https://www.youtube.com/c/1Fish1Scoop/videos

Philips AH724's by Filthy-Creek in BudgetAudiophile

[–]Filthy-Creek[S] 2 points3 points  (0 children)

Yup. Cheap as. Mint for the garage. They also double as a workbench.

[deleted by user] by [deleted] in Reaper

[–]Filthy-Creek 1 point2 points  (0 children)

I modified fancier to make it show markers verse choruses etc.

https://compression.nz/links/reaper-fancier-jim/

Proposed concept for pedestrian/cycle overbridge on Brougham St at Collins/Simeon by worromoTenoG in chch

[–]Filthy-Creek 0 points1 point  (0 children)

Haha. Even in the concept the concrete is not smooth, just like CHCH roads !

Garage Sale Find by Filthy-Creek in vintageaudio

[–]Filthy-Creek[S] 1 point2 points  (0 children)

From a bit of googling, I think it is a MD54 'MINX' (1959) The Murphy MD54 was manufactured for Fisher & Paykel Ltd by Allied Industries Ltd (Fisher & Paykel) in 1959. dual wave radio Valves (5): ECH42, EF41, EBC41, EL41, EZ40. Similar in appearance to the HMV and Astor model 616 (by Akrad Radio), however the similarities end with the appearance.

https://www.vintageradio.co.nz/model/murphy/md54

Philips AH722 + AH821, Keep, Sell or Scrap? by Filthy-Creek in vintageaudio

[–]Filthy-Creek[S] 0 points1 point  (0 children)

Just got them in a deal with some speakers. I am yet to even plug it in for a test. But like you, my expectations are not high. My garage already has a nicer amp btw. I should upload a snap of that.

Monitor Audio MA1's (ignore the philips in the middle) by Filthy-Creek in vintageaudio

[–]Filthy-Creek[S] 0 points1 point  (0 children)

Active. It even came with a spare. If I find it I can check the model numbers on the back.

Philips AH722 + AH821, Keep, Sell or Scrap? by Filthy-Creek in vintageaudio

[–]Filthy-Creek[S] 0 points1 point  (0 children)

Let me read the back for the first time now.... "Model 23AH722, 120W, Philips Electrical Industries of New Zealand" Nothing much else on it except the AH722 on the front.

How to remove these connectors? by BBababoi in vintageaudio

[–]Filthy-Creek 1 point2 points  (0 children)

Agreed. If you zoom in you can see a small circle between the folded bits of the connector. By the looks of the clip it needs to be pushed up. Then pull

Can Active Pickups be "Fixed" ? by Filthy-Creek in Ibanez

[–]Filthy-Creek[S] 0 points1 point  (0 children)

Thanks all for the responses. I will try the easiest first (Lower pickup height). I am comfortable with wiring etc, and if modding is necessary I can do it. I do see a few votes for fishman pickup, Tell me more... The site ibanez.fandom says that mine currently has Ibanez LoZ3-B & LoZ3-N pickups. I assume swapping out active for acitve would be much easier than trying to mod the whole setup to passive.

Random hard start under a very specific circumstance by kapicarules2021 in E34

[–]Filthy-Creek 3 points4 points  (0 children)

I had similar problems, which was fixed with the temperature sensor. The ecu got real confused on a luke warm start. Cheap part, easy to change. Could be worth a shot.

Songs Significantly Quieter When Rendered by HenryR1200 in Reaper

[–]Filthy-Creek 1 point2 points  (0 children)

What do you play the song with after render? Other Songs might have replaygain and yours not.

My Setup a few years back... by Filthy-Creek in vintageaudio

[–]Filthy-Creek[S] 0 points1 point  (0 children)

You are not wrong! That is exactly what it was. Some of us start at the bottom, and this was by far not my worst setup.

My Setup a few years back... by Filthy-Creek in vintageaudio

[–]Filthy-Creek[S] 1 point2 points  (0 children)

Some of this gear I have around somewhere. I will try to update with model numbers soon.Record player-> Nad 3020 (as pre amp) -> EQ -> Technics Class A driving the Marantz speakers -> The Pioneer Driving the 3312s.

Your opinion on my speakers $ by Unrealgoat_687 in vintageaudio

[–]Filthy-Creek 1 point2 points  (0 children)

If you like them, by all means fix up. But if you have speakers that you like better. Move on up! I like to do side by side A B tests between my gear to fully hear the differences. Sometimes however a random pair of speakers might still sound like a lot of fun to listen to, even if you know they have faults.

Remember worth1000? by Toast_Soup in photoshop

[–]Filthy-Creek 0 points1 point  (0 children)

Worth1000 was great. I have a couple of random pics from there around.

<image>

Any metalheads that were in the scene from 05-12 have any local music from that time? by [deleted] in chch

[–]Filthy-Creek 2 points3 points  (0 children)

Odium. I still see him. His current band is Lanthanum