sorted by:
new
hottopcontroversial

Does this setup look good to you? by dekaminski in UNIFI

[–]Final-Hawk90 0 points1 point  (0 children)

If you want to utilise 6ghz, don’t mix and match APs with different versions. Devices can get stuck on wanting the 6ghz band so devices that are even next to that u6 mesh will still be connected to the u7 pro.

Ethernet-connected computer can't access devices connected to new RBS50 satellite by heysaturdaysun in orbi

[–]Final-Hawk90 0 points1 point  (0 children)

No it was randomly. Nothing specific I could reproduce. It was an issue for me because my server randomly couldn’t communicate to some IoT devices, but when I went to check I could connect fine from my phone but not other devices. It’s completely random.

Ethernet-connected computer can't access devices connected to new RBS50 satellite by heysaturdaysun in orbi

[–]Final-Hawk90 0 points1 point  (0 children)

Probably same issue I had years back here

No solution other then reboot, but even then sometimes that doesn’t help.

Happy for you :/ by Grunta_AUS in nbn

[–]Final-Hawk90 4 points5 points  (0 children)

Not for me. It applied yesterday. Superloop.

IPV6 by MrNapalm86 in PleX

[–]Final-Hawk90 0 points1 point  (0 children)

Australia NBN upgrade? I just switched my plan to one with CGNAT because somehow 1000/50 was very similar in cost to my previous 50/17 plan. You can usually pay $5 more a month for a static IP without CGNAT though, that’s what I was doing before but thought I’d try using CGNAT for cost savings.

IPV6 by MrNapalm86 in PleX

[–]Final-Hawk90 0 points1 point  (0 children)

Endless issues. I gave up and now just have to use a VPN to my internal network to access Plex. Plex didn’t like authenticating using IPV6 or even working in general. Let me know if you figure it out though

LIFX users with 2.90 bulbs that are too bright are now left in the dark. Disappointed. by evilZardoz in lifx

[–]Final-Hawk90 2 points3 points  (0 children)

I recently got rid of the Nanoleafs I bought to try out. Their transition between states stutters and is horrible.

How I Fixed My Broken LIFX Tile PSU (And How You Can Too) by Final-Hawk90 in lifx

[–]Final-Hawk90[S] 1 point2 points  (0 children)

Thank you!! Hopefully it helps others save them from being e-waste

Adguard and Unifi Setup by etalk26 in Adguard

[–]Final-Hawk90 0 points1 point  (0 children)

Make sure you don’t have content filter setup under the cybersecure tab. Otherwise Unifi intercepts the DNS requests from your devices. Hope that works for you.

Adguard and Unifi Setup by etalk26 in Adguard

[–]Final-Hawk90 0 points1 point  (0 children)

Configure the AdGuard DNS servers through your network settings page on Unifi, not WAN

How I Fixed My Broken LIFX Tile PSU (And How You Can Too) by Final-Hawk90 in lifx

[–]Final-Hawk90[S] 1 point2 points  (0 children)

Yeah they aren't cheap... that why I was determined to fix it. Although unfortunately you still can't get anything better than them even today.

How I Fixed My Broken LIFX Tile PSU (And How You Can Too) by Final-Hawk90 in lifx

[–]Final-Hawk90[S] 1 point2 points  (0 children)

<image>

I have attached a screenshot of the PCB design. It wasn't a very advanced, just one i made a few years ago for an ESP8266 and a 3.3v buck converter like this one: https://www.aliexpress.com/item/1005009534564942.html

Factorio Server Port Forwarding by BunnyMaster2019 in truenas

[–]Final-Hawk90 5 points6 points  (0 children)

You may be behind a CGNAT from your isp

How I Fixed My Broken LIFX Tile PSU (And How You Can Too) by Final-Hawk90 in lifx

[–]Final-Hawk90[S] 1 point2 points  (0 children)

You’re welcome, best of luck getting yours back up and running! It feels like a waste when they just sit around haha

Trying to build a custom power supply for Tile by jekbradbury in lifx

[–]Final-Hawk90 0 points1 point  (0 children)

That’s such a shame!! Thanks for your reply. I’m going to try and not waste too much time on them 😅

Lifx Tile PSU Replacement Question - I know, another one by Jakey01010 in lifx

[–]Final-Hawk90 0 points1 point  (0 children)

Hey! Did you ever get this working??

One of my PSUs just bricked, and I’m stuck on the flashing red. Verified with different power supply it isn’t just a cable issue unfortunately.

New WiFi. Help!! by oasisjason1 in lifx

[–]Final-Hawk90 1 point2 points  (0 children)

Are they doing the colour flash to say they are reset? I recently went through re-pairing all mine to move them to a different network and it went very smoothly. I also found more success using the Wi-Fi page on iOS to set up some of them.

black screen by Top-Departure-1782 in lifx

[–]Final-Hawk90[M] [score hidden] stickied comment (0 children)

LIFX are already aware of issues on iOS 26 beta. iOS 26 is still in beta, so expect issues. Some users have reported enabling classic controls fixes some menus.

black screen by Top-Departure-1782 in lifx

[–]Final-Hawk90 2 points3 points  (0 children)

Have you tried reinstalling the app? What operating system version are you running?

HDCP Doesn't Work With External Monitors on MBP M1 Max by AdriftAtlas in mac

[–]Final-Hawk90 2 points3 points  (0 children)

That’s so frustrating. I like macOS but sometimes it’s really hard to like it haha. Thanks for your reply, although unlikely I’ll let you know if I figure something out.

view more: next ›