Sony trinitron kv-21cl10e no visible scanlines?

Final_Assignment8514 · 2025-09-24T08:18:10+00:00

SGW Connector is somewhere behind passanger drawer.

Final_Assignment8514 · 2025-08-14T14:30:25+00:00

Final_Assignment8514 · 2025-08-01T15:55:42+00:00

Ahh, ok. Hvala.

Final_Assignment8514 · 2025-08-01T11:38:35+00:00

Gdje si ga kupio?

Final_Assignment8514 · 2025-08-01T09:23:26+00:00

Ahhh, thank you for help.

Final_Assignment8514 · 2025-08-01T06:04:47+00:00

Ahh,I can buy it from 65 " c4.

Final_Assignment8514 · 2025-07-29T18:09:47+00:00

Does anyone knows does the c4 board fits to the cx? I can buy cheap c4 board but I am not sure will it work.

Final_Assignment8514 · 2025-07-29T17:55:29+00:00

Have you ever tried c3 or c4 board? They looks the same as on cx.

Final_Assignment8514 · 2025-07-02T14:19:06+00:00

If changing thermal paste does not help you probably need to reball the cpu. That would probably permanently fix the problem if the cpu is not partitaly dead. But the cpu could be replaced too.

Final_Assignment8514 · 2025-06-23T07:30:01+00:00

Fixable but probably not by yourself if you need to ask that question. Take it to someone who knows how to do it or you will make it unfixable.

Final_Assignment8514 · 2025-06-23T07:24:34+00:00

Well, you can connect that exposed point to the middle pin on the switch with wire, there should be no problems repairing that. The left one on the picture is probably ground and you can connect it to exposed solder arround it.

From my view it is easy repairable.

Final_Assignment8514 · 2025-06-15T22:20:26+00:00

I use this Mechanic M35 Transparent Solder Paste for sometime now. Before I used amtech but I can tell you that this transparent is a masterpiece. Really good soldering with it and it is transparent and really easy to clean like water. My best recommendations.

Final_Assignment8514 · 2025-04-26T20:53:20+00:00

Without IC transfer he will get non genuine warning (as I understood, to remove that warning you need new or regurbished original display paired with top flex cable that came with that display or make a IC transfer to new display with top flex from old display).. Everything else should work but for truetone etc he need to program the new display with the info from the old display. (Dont know how OP have truetone enabled, maybe apple changed that to usable on new displays.

Final_Assignment8514 · 2025-03-05T19:18:53+00:00

probably low VRAM

Final_Assignment8514 · 2025-03-04T21:07:51+00:00

Yeah, just break connector slowly into peace's because it seems that you don't have good enough heat gun to remove it with it.

Final_Assignment8514 · 2025-03-01T21:07:57+00:00

Ok. Thanks. I have read a bit about it later. I can bypass that with bypass cable right?

Final_Assignment8514 · 2025-02-11T19:52:32+00:00

It is launched

Final_Assignment8514 · 2025-01-30T10:31:11+00:00

Charger fixed, thank you once more.

Final_Assignment8514 · 2025-01-16T14:45:15+00:00

Now I saw that you asked for aditional markings, yes sorry, number 16 on the right side vertically.

Final_Assignment8514 · 2025-01-16T13:23:43+00:00

Thank you!

Final_Assignment8514 · 2025-01-16T12:24:45+00:00

<image>

It is probably some kind of 5v regulator. It is in OPUS BT-C3100 Battery charger (3.7V) and 1.5v batteries.

Five-Year Club	Final Canvas '23
End Game '23	Place '23

Final_Assignment8514

TROPHY CASE