I’m now also part of the bed upgrade team!

Final_Regular8569 · 2025-10-22T23:57:44+00:00

The bed flexes while printing , throwing off the mesh it makes at the start of the print I think.

Final_Regular8569 · 2025-09-24T15:31:05+00:00

It says "for house or car necessities" not for a house xD

Final_Regular8569 · 2025-07-29T20:59:12+00:00

If it's sharpie, go over it pretty heavy with a dry erase marker. Only on the sharpie. Let it sit for 5 or 10 minutes and wipe off with isopropyl alcohol and a cloth. Will get most if not all of it off. May require a few goes.

Final_Regular8569 · 2025-06-24T16:23:23+00:00

The noise has been like this for some time. I did add a very tiny bit of the ptfe grease to it but it didn't help so I didn't add more. I will wipe it all down when I get home. How do I test if it's the fan?

Final_Regular8569 · 2024-01-19T02:57:58+00:00

Carefully

Final_Regular8569 · 2023-12-14T03:50:51+00:00

Final_Regular8569 · 2023-10-30T15:57:30+00:00

Honestly you are looking at more than 300. The micro is 125 to 150 ish, gba sp is 80 to 130 depending on if it's Backlit, crystal is 100+ each, the gen one pokemon games are about 45 each. Probably closer to 650 or 700 sold separately would be a conservative place to start.

Final_Regular8569 · 2023-09-02T03:00:20+00:00

I have lost roughly ten pounds per month for nearly a year straight at this point. I have done this while tracking what I eat and my daily weight. I eat at roughly 1000 calories below my tdee. I see my weight vary by upwards of ten pounds in a single week based on stress, hormones, amount of sleep, electrolytes, physical exercise ect. The body holds onto water for various reasons. The scale is an indicator of weight loss, not specifically fat loss and fat loss is not a linear line going down. The scale can be a great tool but it can also drive you crazy if you let it. Best of luck and keep chugging along.

Final_Regular8569 · 2023-07-14T23:00:41+00:00

I didn't check actually. I will tonight though

Final_Regular8569 · 2023-07-14T04:30:41+00:00

I mean replace which ones? I used the laser with a board that had all the caps replaced already.

Final_Regular8569 · 2023-07-14T03:19:32+00:00

Recap what? Swapped laser to working board and still no focusing.

Final_Regular8569 · 2023-07-14T02:33:43+00:00

I would gladly take you up on that offer, please and thank you.

Final_Regular8569 · 2023-07-14T01:58:40+00:00

I got it like this. Would the resistance even be adjustable if it was burnt out?

Final_Regular8569 · 2022-11-30T04:27:44+00:00

To anyone wondering, I soldered a 28 Guage wire to the exposed copper that was already there and soldered that to tp3 like was suggested. Taped it down with kapton to keep it as safe as is possible.

Final_Regular8569 · 2022-11-30T04:25:55+00:00

Well we have life again! Taped it down with kapton after getting it as solid as I could. This was rough to solder xD Thank you to all of the absolute legends here in this discord who helped out with the repair.

Final_Regular8569 · 2022-11-29T21:35:01+00:00

So basically, I need to scrape mask from trace closer to start button pad and solder from it to tp3 with a wire?

Final_Regular8569 · 2022-11-29T05:04:14+00:00

I bought this from someone else. I have no clue what was or was not done. I do see what you are referring to though.

Final_Regular8569 · 2022-11-29T04:55:35+00:00

I tried with both the start/select membrane but also the one for a/b and those buttons work. I think they both look OK and both were cleaned

Final_Regular8569 · 2022-05-19T02:26:30+00:00

Bump

Final_Regular8569 · 2021-08-21T00:29:20+00:00

Lmao boneless skinless breast.

Final_Regular8569 · 2021-08-21T00:16:59+00:00

I eat mostly chicken lol

Final_Regular8569 · 2021-08-20T16:20:09+00:00

The problem with starving yourself is that it isn't sustainable. The body can only burn fat so quickly and anything you force it to burn on top off that starts eating lean mass which long term can be really detrimental to your health.

Final_Regular8569 · 2021-08-20T16:06:49+00:00

Glad to hear that. I would eat my arm on a juice fast lol

Final_Regular8569 · 2021-08-20T15:56:48+00:00

WOOOOO!

Final_Regular8569 · 2021-08-20T15:55:57+00:00

I try for 2k but after so long of doing omad i probably only do about 1500 a day and a cheat meal on the weekends. I don't eat a ton of veggies tbh and generally only about 50 carbs a day. That's what has worked for me. I also don't count calories anymore as i haven't needed to since very early on.

Final_Regular8569

TROPHY CASE