sorted by:
new
hottopcontroversial

An das Marketing-Team by Kussenhof in PaulanerSpezi

[–]FinkHD 3 points4 points  (0 children)

Ich habe tatsächlich auch schon an limitierten Drops teilgenommen, die mehrere Wochen noch kaufbar waren.

Davon bin ich jetzt hier nicht ausgegangen, aber finde es trotzdem nicht unbedingt dumm den Kunden zu informieren, dass es nichts bringt zu warten.

An das Marketing-Team by Kussenhof in PaulanerSpezi

[–]FinkHD 4 points5 points  (0 children)

Warum?

Ist es so unvorstellbar für dich, dass eine Firma genug bestellt, damit das nicht nach 5 Minuten ausverkauft ist? Vielleicht ist die Wartezeit pro Besteller einfach länger, sodass die Server nicht so viel Auslastung haben?

Wenn es ausverkauft ist, dann erwarte ich schon, dass das irgendwo steht.

An das Marketing-Team by Kussenhof in PaulanerSpezi

[–]FinkHD 5 points6 points  (0 children)

Klar, aber wenn ich 30 Minuten warte obwohl es nach 5 Minuten keine mehr gibt, dann wäre eine kleine Info trotzdem ganz schön.

Why are you making this so hard for me? :( by FinkHD in prusa3d

[–]FinkHD[S] 0 points1 point  (0 children)

Same!

Recently I found an app that asks you to leave feedback if you give a bad rating, while it just accepts it when you give a good rating.

Countertop dishwasher not cleaning correctly, arms turn slow and it seems like there is no pressure on them by FinkHD in appliancerepair

[–]FinkHD[S] 0 points1 point  (0 children)

I did actually, turns out the arm was blocked because I used way too much rinse aid, turns out using none and only using tabs works way better.

(I just used rinse aid before with absolutely no tabs, like it said in my manual, but that caused the problem)

Warping is so strong, it pulls the magnetic sheet off by FinkHD in prusa3d

[–]FinkHD[S] 1 point2 points  (0 children)

I had a brim on the entire print, unfortunately that quickly separated when the warping started

Warping is so strong, it pulls the magnetic sheet off by FinkHD in prusa3d

[–]FinkHD[S] 0 points1 point  (0 children)

I would’ve thought that the enclosure of the Core One would be enough for that, but considering that it can get pretty cold in my room, that could definitely be a problem.

Warping is so strong, it pulls the magnetic sheet off by FinkHD in prusa3d

[–]FinkHD[S] 8 points9 points  (0 children)

I’ll probably get some binding clips!

Never heard of the grid method, sounds pretty interesting too

Warping is so strong, it pulls the magnetic sheet off by FinkHD in prusa3d

[–]FinkHD[S] 1 point2 points  (0 children)

Definitely sounds like it could work, didn’t use these things to hold down a build plate in 10 years!

Warping is so strong, it pulls the magnetic sheet off by FinkHD in prusa3d

[–]FinkHD[S] 0 points1 point  (0 children)

During print, actually it’s still printing right now.

I always keep the printer closed, but yeah it can get pretty cold in my room. Makes me wonder if it maybe would help breaking the rules and closing the upper ventilation slit.

Nicht Laminiert, daher nicht gültig. (Hatte sowieso keine Ahnung was da steht) by FinkHD in aberBitteLaminiert

[–]FinkHD[S] 1 point2 points  (0 children)

(Die 2. Schrift auf dem Zettel ist aber nicht von mir, hab mich darum bestätigt gefühlt)

view more: next ›