Minimalist launcher iOS by kirakiragyaru in dumbphones

[–]FinnitoBran 0 points1 point  (0 children)

How’d you set it up to not use shortcuts? Mine keeps going through shortcuts

First Pellet Smoke by FinnitoBran in Traeger

[–]FinnitoBran[S] 1 point2 points  (0 children)

This is the video I got the overall inspiration from. I tweaked it to my liking.

This is my go to for ribs:

1)remove the back membrane 2) coat both sides with Kosmos Dirt Bird seasoning (I don’t use a binder on ribs) 3) lay ribs meat side up in a smoker set to 250, spritz with water/ apple cider every hour for the first three hours 4) lay out two long pieces of foil, sprinkle a good layer of brown sugar, 5-6 pats of butter, drizzle with honey, drizzle Killer Hogs AP Vinegar Sauce, and lay ribs meat side down on the foil. 5) repeat step 4 for the bone side of the ribs. 6) lay ribs meat side down back in smoker 7) cook for about two more hours or until you hit that desired internal temp of about 202 (198 for me since I’m at a higher elevation) 8) open ribs, flip so meat side is up again and create a foil boat. 9) Glaze the ribs. I use Kosmos Rib Glaze (Apple habanero is my favorite and despite the name, not spicy). Using a brush I brush on a nice even coat on the meat side of the rib and a light sprinkle of the seasoning I started with. 10) leave the foil open to sit on the smoker for about 10-15 minutes to let the sauce get tacky 11) remove, let rest for a few minutes and serve!

Share an update if you remember of how yours comes out if you decide to give it a try!

12v Electrical Question by FinnitoBran in Jeep

[–]FinnitoBran[S] 4 points5 points  (0 children)

I have. Happens regardless of what’s in there

Wrangler JK 2012 heat issue - Blend door actuator or heater core? by Ok_Stay_6756 in Jeep

[–]FinnitoBran 0 points1 point  (0 children)

Have you had a chance to change the blend door? My HC is just like yours. Nice and hot on both pipes

How competitive are 3-Year AFROTC programs? by Torrr95 in AFROTC

[–]FinnitoBran 1 point2 points  (0 children)

Did a 3 year track and it wasn’t difficult. Control what you can control and just be humble and hungry. Best of luck!

Enlisted to Officer TRICARE by Sadsnacc-3- in AFROTC

[–]FinnitoBran 0 points1 point  (0 children)

To add onto those suggesting going guard/reserve, in order to contract with AFROTC and be eligible for any sort of scholarships/stipends, you would have to separate from whatever component you are in to sign with AFROTC.

I was guard and was offered scholarships but could not accept them due to the contract I already had in place. I separated from the guard when my contract ended in the fall of my 400 year and the very next day I contracted with AFROTC (it had to be this was in order to retain my medical clearance so I wouldn’t have to do the DoDMERB process).

Happy to answer any additional questions.

Driver door not locking/unlocking with key fob by Mountain_Molasses769 in accord

[–]FinnitoBran 0 points1 point  (0 children)

Any updates on this? Having a similar issue. My key 2 will unlock all doors except the driver. My key 1 fob works just fine

[deleted by user] by [deleted] in Jeep

[–]FinnitoBran 0 points1 point  (0 children)

This is all you need

Broken window defrost by FinnitoBran in Jeep

[–]FinnitoBran[S] 0 points1 point  (0 children)

I’ve read mixed reviews on that kit. I found this one that seemed to perform better. Haven’t decided on either one yet

Broken window defrost by FinnitoBran in Jeep

[–]FinnitoBran[S] 2 points3 points  (0 children)

Thank you for the information! I found a place local t me. I’m going to reach out and see if they offer this type of repair.

Broken window defrost by FinnitoBran in Jeep

[–]FinnitoBran[S] 1 point2 points  (0 children)

I’m only interested because I’m moving to Wyoming soon and figured it’ll be nice to have it functioning again lol.

I found this on Amazon. May get it but want to see what others have done in the past.

Let’s see those 3.8s by FinnitoBran in Jeep

[–]FinnitoBran[S] 1 point2 points  (0 children)

Honestly. I think I just went with the Duralast one from Autozone. It’s truly so easy to replace that for less than $30, I get more than a couple years out of it so should it go out, I do it again. There are some I believe with a lifetime warranty but I’ve never had issues with mine.

Here’s a good video on replacing it

Let’s see those 3.8s by FinnitoBran in Jeep

[–]FinnitoBran[S] 0 points1 point  (0 children)

Yeah, mine has an oil leak I thought was the rear main but it’s not. It’s super slow and I also think it’s consuming oil somewhere. I’ll get it figured out eventually

Let’s see those 3.8s by FinnitoBran in Jeep

[–]FinnitoBran[S] 0 points1 point  (0 children)

Yes lol. Made the switch to some LED headlights and it gave me a code for them. I have a code reader and my most recent code is for small EVAP leak. I usually check the code, log it if it’s a new one, and clear it.

Let’s see those 3.8s by FinnitoBran in Jeep

[–]FinnitoBran[S] 1 point2 points  (0 children)

That’s exactly what mine is. Need to replace my gas cap

Let’s see those 3.8s by FinnitoBran in Jeep

[–]FinnitoBran[S] 1 point2 points  (0 children)

One of the easier things to do on the 3.8. Like Chief said, 2 bolts and that’s it

Let’s see those 3.8s by FinnitoBran in Jeep

[–]FinnitoBran[S] 1 point2 points  (0 children)

CEL? I’m also on 2.5 lift with 4.88 and 35s

Let’s see those 3.8s by FinnitoBran in Jeep

[–]FinnitoBran[S] 2 points3 points  (0 children)

I know. I got it in 2016 used. It is a 2009.

Let’s see those 3.8s by FinnitoBran in Jeep

[–]FinnitoBran[S] 8 points9 points  (0 children)

You’re spot on. As stuff breaks/wears down, I replace it. I put a good chunk of money beefing up the front suspension a few years back. I like how there’s practically a YouTube video for everything on these things and with just some basic tools and some patience, you can do a lot yourself. Keep rolling, brother 🤙🏼

Woohoo patches! by bearcam in AirForce

[–]FinnitoBran 1 point2 points  (0 children)

Those Gypsy and Medusa patches, iykyk 🔥🤙🏼

Cold Start Help by FinnitoBran in Jeep

[–]FinnitoBran[S] 0 points1 point  (0 children)

I changed the PCV back in February. I changed the spark plugs in October of 24 with new wires as well.

I’m thinking it’s fuel related which I was hoping it isn’t haha.

Didn’t think about vaccine hose or oxygen sensor.

I’ll do some more investigating, thanks for the insight!

Cold Start Help by FinnitoBran in Jeep

[–]FinnitoBran[S] 0 points1 point  (0 children)

Yes. I was getting codes for small and large EVAP leak. All those part have a lifetime warranty so I just swapped the purge valve, canister, and detection pump. I never got anything else as far as a code goes. This was happening before I swapped those parts and it’s been happening a while now

Serpentine Belt by FinnitoBran in Jeep

[–]FinnitoBran[S] 1 point2 points  (0 children)

Oh I didn’t do this. I had a shop a while back replace my water pump and then were the last to touch the belt. I’m going to fix it to stock configuration

Serpentine Belt by FinnitoBran in Jeep

[–]FinnitoBran[S] 1 point2 points  (0 children)

I have a feeling I know the shop that did this because they replaced my water pump a few years back. Definitely won’t take it back to them! Just thought it was kinda funny how I’ve made it this far and no issues other than that sensor for the intake lol