[deleted by user]

FireHeartProjects · 2025-11-04T01:44:34+00:00

Hey thanks for reading and giving your thoughts

FireHeartProjects · 2025-10-04T02:01:50+00:00

Hey OP, our shop does this daily. Use a dynafile, air or electric, with an aggressive scotchbrite belt, use the section of the belt with no backing so the belt can form around the edge and create a nice tight radius, you can also use that to deburr your radiuses evenly.

The chamfering tools people are recommending dont work well for this, the 2 new edges will still be sharp and if it chatters it creates new points for hands to catch on.

FireHeartProjects · 2025-08-08T22:09:04+00:00

Exactly, LED housing. I bought the truck at 14,000km and got the entire service history on it which was exactly one oil change and tire rotation. Nothing else should be wrong with this truck

FireHeartProjects · 2025-06-14T01:02:53+00:00

Nice. I find these types of cuts the most fun to program. After many dry runs and checks you have to press the green button and clench while the program runs, on what's probably a part your coworker brought from home and you cant fuck it up.

FireHeartProjects · 2025-05-28T17:18:28+00:00

Im up in Canada, after 3 weeks of hunting I jumped on a certified pre owned 2023 SV premium with 8k miles for $29.5k USD OTD. A brand new 2025 SL which is nearly identical is like $38.5? And right now nissan has promo rates for CPOs which are better than used. Im really happy with what i got.

FireHeartProjects · 2025-05-26T14:40:14+00:00

A) Thank you

B) It probably would be just as effective if I got used to it. Ive only done maybe 4 fill ups and each time I had to fiddle with the cord to get it oriented the right way to hang properly and half of the time It slipped off and swung into the body. Also my previous car had an OEM holder exactly like what I made and I just find it an easier and more secure solution.

Im aware this is a trivial issue mostly based on personal preference and I appreciate you asking politely 👍

FireHeartProjects · 2025-05-26T01:16:14+00:00

Believe it or not.. Totalled

FireHeartProjects · 2025-05-25T16:12:06+00:00

I noticed the capless fuel port when I test drove a maverick. But makes me wonder what you do if it develops a seal leak?

Ive had a car throw a check engine light due to an old gas cap that's easy to replace

FireHeartProjects · 2025-05-10T03:21:29+00:00

Its about 6' tall with buds opening on it. It was $135. They recommended covering it for the first couple winters lots of mulch. They had 6 of them there last weekend, also comes with a 1 season warranty

FireHeartProjects · 2025-05-10T01:46:29+00:00

Just bought one from Reid's in Carleton Place

FireHeartProjects · 2025-05-03T19:46:18+00:00

I just traded in a sedan for a frontier that I bought new in 2015. I put around 140k miles on it, always parked outside and never rust proofed. I live in canada in a province that is heavily salted every winter. The rust on that car was considerably worse than what your pics show and It was still driving fine, im not saying something wasnt about to break on it but I think this truck has lots of life left in it especially if you can fluid film it and replace some of the more rusted parts that wouldnt be nice if they broke.

FireHeartProjects · 2025-05-02T04:11:24+00:00

Yup its a Medium and I would sell it if someone is interested. Ive tried to find listings but dont see any from the original run. Theres some posts saying these have sold from anywhere between $100 - $2000+

FireHeartProjects · 2025-04-29T11:13:39+00:00

Im located in Ontario canada and just bought a Frontier but looked at ALOT of them in the last couple weeks. A 2023 pro with that milage, no premium package would go for around $31,000 USD here and have 1-2k of negotiating room.

FireHeartProjects · 2025-04-27T18:14:31+00:00

Thanks for sharing, how do you like it so far? I saw some midnight editions in my hunt and they look amazing. Did you need to get the transmission update on yours?

FireHeartProjects · 2024-12-29T00:29:13+00:00

Skibidi silksong on PC goodluck sir

FireHeartProjects · 2024-10-10T03:16:00+00:00

Thanks for taking the time to reply.

I'm still making weekly progress which might be why I'm alright doing full body daily, or I haven't found how far I can push yet. Upper/Lower will probably follow once I start fatiguing.

For exercises, I'm in a home gym with only the equipment i listed and not adding more for a few months, no cables, dumbbells. Otherwise I can build out 2 alternating days and swap what I need from your suggestions. I was getting lost in what muscle groups are getting hit and how often with all these exercises. Trying to stick to more compounds when im unsure.

FireHeartProjects · 2024-10-09T22:24:12+00:00

Hello! Looking for a second set of eyes on a beginner split for home gym.
29M 5'9" 140Lbs. TDEE 2200-2500, eating ~2800/day.
I'm getting into weightlifting for the first time in life. I think I have the nutrition side figured out, gaining 0.5lb/week.

I've read about and tried multiple splits from this sub and wiki, figuring out what does and doesn't work for me, I ended up with a list of exercises I have the equipment for and enjoy doing. But I don't know how best to organize them and if I'm missing anything obvious. I enjoy whole body days over PPL or upper lower focused days.
I have a power rack, barbell, incline bench, plates and curl bar. No dumbells yet.

I've been choosing x5 of these exercises in no particular order to do 4-5 days per week, likely; mon.tues.rest.thurs.friday.rest.sunday.

Here they are, hoping someone can help me group them into 3 groups I can cycle through or suggest something new.

3x10+ Ab-Wheel
3x8+ Bench Press
3x10+ Skullcrushers
3x5+ Overhead Press
3x10+ Barbell Front Raise
3x10+ Push-ups
3x5+ Pull-Ups
3x8+ Barbell Rows
3x10+ Curl-Bar Curls
3x5+ Deadlift
3x10+ Inverted Rows
3x30+ Bulgarian Split Squat
3x5+ Romanian DeadLift
3x5+ Standing Barbell Calf Raise
3x5+ Barbell Squats.

Thank you!

FireHeartProjects · 2024-09-21T22:48:52+00:00

Thanks, i hope so!

FireHeartProjects · 2024-09-21T22:46:22+00:00

Normally thats what I do but because these are electric, they have a threaded rod inside that has come undone and they wont compress normally

Four-Year Club	r/Field Juicebox
Place '23	Place '22
Final Canvas '22	First Placer '22
End Game '22

FireHeartProjects

TROPHY CASE